Dye a fur coat at home. How to dye faux fur at home

Do you have a fur item lying around in your wardrobe that has long gone out of fashion? It would be a shame to throw away clothes made from natural fur, so you can breathe a second wind into them. To do this, the product should be painted or restored to its original color.

Don’t save money; take the fur to a dry cleaner or atelier. Such organizations know how to handle natural fur and suede.

It is known that fur products look beautiful and luxurious and provide good warmth in the winter cold. Like any clothing, they lose their great appearance over time. If your favorite thing has faded or is simply boring, you can paint it at home without turning to specialists, thereby turning it into something new and unique.

How to dye arctic fox fur at home

Arctic fox fur lends itself well to dyeing. If you want to upgrade your Arctic fox item, you will need:

• hair dye;
• fatty cream (can be replaced with glycerin);
• hair balm;
• rubber medical gloves;
• a brush or an old toothbrush for applying the coloring composition;
• vinegar.

Your actions:

1. Lubricate the inside with cream.
2. Stretch the material on a flat surface and secure it.
3. Thoroughly moisten the previously cleaned surface with water.
4. Wear gloves and quickly apply the coloring compound, smoothing the pile with your hand.
5. Wait for the period of time specified in the staining instructions.
6. Rinse the lint under running warm water and rinse in a vinegar solution.
7. Treat the item with balm diluted in water and rinse.
8. Lubricate the inside again with cream, carefully stretch it, pin it with pins, and let it dry.

Dyeing a mink coat

Mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before you dye mink fur at home, prepare:

• hair dye;
• spray;
• a comb with fine teeth;
• shampoo;
• hair balm;
• fatty cream (glycerin is possible).

Your actions:

1. Clean the item from grease and dirt.
2. Treat the flesh with cream.
3. Prepare the coloring composition according to the instructions.
4. Lightly moisten the surface with water using a spray bottle.
5. Apply the dye to the pile with a spray bottle from a distance of 50 cm.
6. Even out the tone by combing the surface with a comb.
7. Wait half an hour.
8. Rinse off the coloring composition with warm water and shampoo.
9. Rinse with balm diluted in water.
10. Apply the cream to the flesh.
11. Lay out the product and leave it to dry.
12. Comb the fibers in the desired direction.

Fur cleaning

Before you dye your fur at home, you need to clean it. Paint particles have difficulty penetrating greasy, contaminated pile. Before dyeing a fur coat or other fur item, you should clean the product with an alkaline solution. To do this you will need:

• water – 1 l;
• salt – 2 tsp;
• ammonia – 1 tsp;
• detergent (dishwashing gel, washing powder) – 1 tsp;
• baking soda – 2 tsp.

Your actions:

1. Dissolve the ingredients in water, stir well until smooth.
2. Treat the flesh with a rich cream (possibly glycerin) to prevent drying out.
3. Apply the resulting solution evenly to the pile using a brush.
4. Rinse thoroughly under running water.
5. Lay the item out and let it dry at room temperature.

Coloring fur with hair dye

The structure of natural fur pile resembles human hair. Therefore, hair dye is suitable for home dyeing. This drug can be purchased at any supermarket or household chemical store. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give something a light shade, you need to bleach it by treating it with a solution of hydrogen peroxide. Dyeing fur with this product is simple and reminiscent of the procedure for coloring your own curls.

Spray for coloring fur

Another product intended for dyeing at home is a special spray. This product is used to add tint to long ends. The undercoat and undercoat are not affected. The dye dissipates at a distance of 60-70 cm. The can should be moved slowly and measuredly to distribute the substance evenly. The painted area should be combed immediately to remove excess product and prevent the fibers from sticking together.

Video: is it possible to dye a mink coat?

Dear Clients

Prepayment for sewing products is not less than 50% of the cost of work.

The Lynx factory also offers additional services, such as painting, cutting and hauling.

Dye fur is produced in different colors. We dye both individual skins and finished fur products (we don’t paint sheepskin coats) .

When painting finished fur products, be careful. Paint happens without fabric lining, only skins are dyed. Before painting, you are checked to see if it can be painted.

If you wish, you can check it yourself : Take your fur item that you want to dye, lightly peel off the lining and wet the skin well. After this, forcefully pull the soaked leather in different directions; if the leather is torn, it means that poor-quality workmanship was used in the sewing and when painting, your product may fall apart - paint it IT IS FORBIDDEN, if the skin easily stretches to the sides - paint CAN .

We warn you in advance, when sewing a fur product, many companies often stretch the skin to make it larger, such things after painting I can shrink up to 30% .

Painting of fur products

DO NOT DYE SHEEPSKIN COATS, SHEEPSKIN (NOT SHEARED) AND LEATHER!

• Painting time 2 weeks
• Shrinkage of a fur product during painting 30% (1 size)
• Shrinkage during dyeing always occurs and the product shrinks unevenly
• It is necessary to restore (restore) the product after dyeing Necessarily!

  Restoration of products after dyeing
  

  Size	In Malakhovka
  Vest	10,000 rub.
  Jacket (length up to 65 cm)	from 15,000 to 18,000 rub.
  Short fur coat (length up to 90 cm)	from 18,000 to 20,000 rub.
  Short fur coat (up to 105 cm)	from 20,000 to 23,000 rub.
  Long fur coat (from 110 cm)	25,000 rub.
  Cover with new lining	25,000 rub.
  Flare (depending on the length of the product)	from 10 - 30%
  Hood	2,000 rub.

  Prices do not include the cost of the stock (up to size 50)

  A little history about dyeing coats, fur and skins

  Animal fur has been necessary for humanity throughout the history of its existence. And today, fur remains a valuable and commercially viable product, because it is used not only for warmth, but also for decoration and, undoubtedly, is a luxury item.

  The skins of fur-bearing animals consist of a dense undercoat and longer, stiffer hairs that rise above this layer. The main function of the undercoat is to maintain the animal's body temperature, and the longer guard hair is to protect the skin during rain or snow. Fur pelts are mainly sold at auction. Most of them are bought by production companies specializing in sewing products using fur or by brokers. The largest auction centers are located in New York, Montreal and St. Petersburg.

  In the modern fur industry, fur is used for sewing or decorating outerwear. Often, in order for the finishing color to go well with the color of the main material of the product, it is used fur dyeing in different tones. High quality dressing and dyeing fur is very important, because this will determine how long the product made from it will last. Many people are interested in the question: is it possible dye the fur so that it does not lose its quality? Certainly! Moreover, if painting skins was produced in compliance with the necessary technology, the fur can last longer. That's how dye natural fur Only professionals know how to ensure that the skins remain soft and elastic. Sometimes the fur, on the contrary, is bleached or this method is used dyeing natural fur, in which only longer hairs are shaded. This is exactly what happens in some cases silver fox fur dyeing. Same method can you dye arctic fox fur and give the product a very original look. When sewing a mink coat or coat, it is also advisable dyeing fur or mink coat in one color, if there are skins that are identical in softness, length of pile and density of the undercoat, but initially different in color.

  Selecting skins for a product is not an easy task and requires a lot of furrier experience. The advantage of fur material is that, if necessary, you can replace pieces with defects with others that are ideal for the main raw material. In such cases it may also be necessary dye mink fur, arctic fox or other fur-bearing animal to match the color of the skins that were selected for the product. It is possible to give a fresh look to a coat or fur coat that has been worn for several years if dye old fur into a different, more saturated shade. A competent selection of fur makes the fur coat look like it was sewn from one large skin, without focusing on the joining of different fragments.

  Information about where can you dye fur, now it won’t be difficult to find. It is important to turn to professionals, because such material is quite expensive and requires a special approach. Usually these are special workshops or fur dyeing studio. Such organizations have special equipment and, most importantly, extensive experience in working with different types of fur, so you should have no doubts where to dye real fur .

  Fur skins can be dyed in different ways. The main ones are namazny, okunochny or combined. In each individual case, the most optimal of them is used.

  Where to dye fur in Moscow can be found out from various sources. It should be taken into account that this procedure is quite expensive and only a high-quality service can guarantee a good result and not disappoint. Therefore, trust only verified sources , in such a non-standard type of service as fur dyeing in Moscow . Fur dyeing price will depend on several factors: the painting method and the chemicals used (size, length, style) if it is a product.

  Examples of fur and skin dyeing work

Undoubtedly, it will be much easier to take it to the dry cleaner or to specialists. Then the fur coat will definitely not deteriorate under any circumstances. However, you can do this yourself, but at your own peril and risk. When painting or changing the color of this type of clothing, it is worth considering many factors - the age of the fur coat, the density of the seams, the possibility of the skin drying out. Is it possible to dye a mink coat? Answer: of course. But first it will have to be processed.

For this you will need:

· glycerin;

· ammonia;

· special means for washing fur products;

It is necessary to carefully coat the inside of the skins themselves (not the lining) with glycerin. This is necessary so that they do not dry out after getting wet.

And the fur itself should be treated to remove dirt using an alkaline solution, which consists of three teaspoons of salt, one teaspoon of ammonia and a similar volume of detergent. All this needs to be poured into one liter of warm water and a pinch of soda added. Then stir thoroughly.

All this must be applied to the fur coat, laid out on the floor without folds, from the front side, thoroughly brushing the fur with a brush. This procedure will clean it of dirt, due to which the paint may lie unevenly. After this, the fur should dry on its own.

How to dye a fur coat yourself?

Now you can paint.

1. To decide how to dye your fur, you will need several packages of high-quality hair dye (depending on size and thickness) and a large ceramic bowl.

2. The paint must be diluted in it according to the instructions on the package.

3. Then paint should be applied to the laid out fur coat using a special brush or broom, having first slightly wet the fur. It is advisable to wear gloves before doing this - if necessary, this will allow you to apply the substance directly on your clothes.

4. After 30-40 minutes, you need to rinse the fur in water and vinegar, and then pat thoroughly with paper towels until slightly damp. Wiping and squeezing the fur more actively is prohibited.

5. Then you should let the fur coat dry on its own. You can stretch it a little on your hangers so that it doesn’t shrink.

Do you have clothes made of fur, but you are tired of them, you don’t like them, the fur is worn out and faded? Don't rush to throw it away! It can serve you for another year. You just need to update the product a little. How? Read below.

This may be the first time you've heard, but fur can be dyed, even after it has been worn for many years.

This can be done either in a special salon or dry cleaner, or independently, at home.

How to dye fur at home?

First of all, inspect the fur and the inner side (the so-called underside). If the first one looks dirty, and the second one is hard and dry, then the product must be washed before dyeing.

To do this, rub fatty sour cream or kefir into the flesh with a cotton swab (repeat the procedure several times). As a result, it should become soft and elastic.

Wash the fur with shampoo for oily hair or laundry soap. It is not recommended to vigorously rub the fur so as not to damage it.

Dying fur at home is easy if you follow the technology. If you plan to remake or alter the product, then it is better to unstitch it in advance.

Most often, fur is dyed in dark colors (black or brown), as they ideally hide unevenness of the coat, coloring, defects and blemishes.

In addition, it is advisable to repaint the fur a tone darker than the natural color. However, if you want to do something exclusive or unusual, then a lighter tone or tinting is allowed.

Mouton products can be dyed brown and black. From astrakhan to black. Brown, blue and gray mink fur can be given the same, but more intense shade.

Pastel, beige, pearl tones of fur are ideally dyed brown.

The furs of red, black-brown, silver-black foxes and arctic foxes are perfectly dyed into gray, red and blue. Fur dyeing should be done in a deep plastic container.

Of course, you have a question: how to dye fur?

Dyeing fur at home is a fairly simple procedure. This is where your own hair coloring skills will come in handy.

You will be surprised: to dye a fur product you can use an ordinary thing - hair dye. It is better to purchase several packages, as one may not be enough.

Before starting the procedure for applying hair dye, it is recommended to lightly wet the fur with water so that the dye can be easily distributed (it is prepared according to the instructions).

The paint must be applied quickly. It is convenient to work with gloves: this way you can thoroughly rub the paint. The duration of dyeing depends on the desired shade (usually indicated in the instructions).

At the end of the dyeing time, the fur should be rinsed in water with vinegar added, and then blotted with a towel.

The fur needs to be dried in natural conditions; it must first be stretched on a hard surface with the nap facing up and secured with pins.

It’s quite easy to renew fox fur with a saturated (dark brown) solution of potassium permanganate, which is convenient to apply with a sponge; there is no need to wet the fur. As a result, the fur will acquire a rich, bright red color.

More