What sizes of syringes are there? Just what the doctor ordered. Giving medicine to a baby

It is important to understand what a 1 ml insulin syringe means and how to calculate the dosage. Diabetic patients are forced to inject themselves. They must be able to determine how much hormone to administer based on the situation.

Composition of drugs

To calculate insulin in a syringe, you need to know what solution is used. Previously, manufacturers made medications containing 40 units of the hormone. On their packaging you can find the U-40 marking. Now we have learned to make more concentrated insulin-containing liquids, which contain 100 units of the hormone per 1 ml. Such containers with solution are marked U-100.

In each U-100, the dose of the hormone will be 2.5 times higher than in U-40.

To understand how many ml are in an insulin syringe, you need to evaluate the marks on it. For injections, different devices are used, they also have U-40 or U-100 signs. The following formulas are used in the calculations.

  1. U-40: 1 ml contains 40 units of insulin, which means 0.025 ml - 1 U.
  2. U-100: 1 ml - 100 IU, it turns out, 0.1 ml - 10 IU, 0.2 ml - 20 IU.

It is convenient to distinguish instruments by the color of the cap on the needles: for a smaller volume it is red (U-40), for a larger volume it is orange.

The dosage of the hormone is selected by the doctor individually, taking into account the patient’s condition. But it is extremely important to use the necessary injection agent. If you draw a solution containing 40 units per milliliter into a U-100 syringe, using its scale as a guide, it will turn out that the diabetic will inject 2.5 times less insulin into the body than planned.

Markup features

You need to figure out how much of the drug is required. Injection devices with a capacity of 0.3 ml are available for sale, the most common being 1 ml. This precise size range is designed to ensure that people can inject a strictly defined amount of insulin.

The volume of the injector should be based on how many ml are indicated by one marking division. First, the total capacity should be divided by the number of large pointers. This will give you the volume of each of them. After this, you can count how many small divisions are in one large one, and calculate using a similar algorithm.

It is not the applied stripes that need to be taken into account, but the spaces between them!

Some models indicate the value of each division. A U-100 syringe can have 100 marks, broken up by a dozen large ones. They are convenient for calculating the required dosage. To administer 10 units, it is enough to draw the solution up to the number 10 on the syringe, which will correspond to 0.1 ml.

U-40s typically have a scale from 0 to 40, with each division representing 1 unit of insulin. To administer 10 units, you should also dial up the solution to the number 10. But here it will be 0.25 ml instead of 0.1.

The amount should be calculated separately if the so-called “insulin” is used. This is a syringe that holds not 1 cube of solution, but 2 ml.

Calculation for other markings

Usually, diabetics do not have time to go to pharmacies and carefully select the necessary equipment for injections. Missing the deadline for administering the hormone can cause a sharp deterioration in well-being; in particularly difficult cases, there is a risk of falling into a coma. If a diabetic has a syringe on hand intended for administering a solution with a different concentration, he has to quickly recalculate.

If a patient requires a one-time injection of 20 units of a drug labeled U-40, and only U-100 syringes are available, then you should draw not 0.5 ml of solution, but 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate by it! You need to choose the same 20 units.

How else are insulin syringes used?

ASD fraction 2 - this remedy is well known to most diabetics. It is a biogenic stimulant that actively affects all metabolic processes occurring in the body. The drug is available in drops and is prescribed to non-insulin-dependent diabetics with type 2 disease.

ASD fraction 2 helps reduce the concentration of sugar in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then a syringe if we are not talking about injections? The fact is that the liquid should not come into contact with air, otherwise oxidation will occur. To prevent this from happening, and also for accuracy of administration, syringes are used for the set.

Let's calculate how many drops of ASD fraction 2 are in the “insulin”: 1 division corresponds to 3 particles of liquid. This amount is usually prescribed when starting the drug and then gradually increased.

Features of various models

There are insulin syringes on sale that are equipped with removable needles and are of one-piece construction.

If the tip is soldered to the body, the medicine will be completely removed. With fixed needles, there is no so-called “dead zone” where part of the drug is lost. It is more difficult to achieve complete removal of the medication if the needle is removed. The difference between the amount of hormone collected and injected can reach up to 7 units. Therefore, doctors advise diabetics to purchase syringes with non-removable needles.

Many people use the injection device several times. This is prohibited. But if there is no choice, then the needles must be disinfected. This measure is extremely undesirable and is only permissible if the syringe is used by the same patient and it is impossible to use another one.

The needles on the “insulin”, regardless of the number of cubes in them, are shortened. The size is 8 or 12.7 mm. The release of smaller versions is impractical, since some insulin bottles are equipped with thick stoppers: the medicine may simply not be removed.

The thickness of the needles is determined by special markings: a number is indicated next to the letter G. You should focus on it when choosing. The thinner the needle, the less painful the injection will be. Given that insulin is administered several times daily, this is important.

What to pay attention to when performing injections

Each vial of insulin can be used multiple times. The remaining amount in the ampoule should be stored strictly in the refrigerator. Before administration, the drug is warmed to room temperature. To do this, remove the container from the cold and let it stand for about half an hour.

If you have to use a syringe multiple times, it must be sterilized after each injection to prevent infection.

If the needle is removable, then different models should be used to collect the medicine and administer it. Large ones are more convenient for taking insulin, while small and thin ones are better for injections.

If you need to measure 400 units of the hormone, you can take it into 10 syringes marked U-40 or 4 syringes labeled U-100.

When choosing a suitable injection device, you should focus on:

You should take a little more insulin (1-2 units), since some amount may remain in the syringe itself. The hormone is taken subcutaneously: for this purpose, the needle is inserted at an angle of 75 0 or 45 0. This level of tilt allows you to avoid hitting the muscle.

When diagnosing insulin-dependent diabetes, the endocrinologist must explain to the patient how and when the hormone should be administered. If children become patients, the entire procedure is explained to their parents. For a child, it is especially important to correctly calculate the dose of the hormone and understand the rules for its administration, since a small amount of the drug is required, and an excess of it should not be allowed.

1 cube in a syringe how many ml

how much is in 1 syringe cube ml

In the Other education section, the question is 1 cube cm of syringe - how many ml? asked by the author Sanya Sanya the best answer is cm"3 and ml are different names for the same volume. milli 1\\1000 liter = 1000 cm"3 so think about it. There are different types of teaspoons.

1=1 there! You don't equal now! There is still sweating and many other things! Generally in kb. ml 1 ml goes!

koli4estvo 4ainih lozek umnozit na 5)

1 cm3 = 1 ml = 30 drops (how do you pour 5 ml into a teaspoon? - Look at the syringe at 5 ml (cm3) what is its volume)

How many ml are in 1 syringe cube? How many mg are in 1 syringe cube?

1 cube in a syringe is how many ml (milliliters)?

1 cube in a syringe is how many mg (milligrams)?

Syringe cubes, slang name for its capacity in ml. One cube in a syringe means one ml. medicinal solution. One ml. water, weighs one gram. This means that in one cube or milliliter of water there will be 1000 mg of the weight of this water. The number of mg of the drug in the ampoule is determined by the percentage. For example, we have one ampoule of 1% diphenhydramine with a volume of one ml. In dry form, the amount of diphenhydramine is in 1 ml, its 1% solution will be 0.01 g. That is, 10 mg.

A cube is the colloquial name for a cubic centimeter, and if we talk about a syringe cube, it means 1 milliliter (a milliliter is equal to a cubic centimeter).

Thus, 1 cube of a syringe will always equal 1 ml of liquid or drug solution.

There are syringes of different capacities - 1 ml, 2 ml, 5 ml, 10 ml, etc.

Based on the above:

A 1ml syringe is the same as a 1cc syringe.

A 5ml syringe is the same as a 5cc syringe.

A 10ml syringe is the same as a 10cc syringe.

As for the number of mg (milligrams) in a syringe cube, this value will depend on what kind of liquid or medicine is in it.

For example, if you take water, then 1 ml of water = 1 gram of water = 1000 mg of water. That is, 1 cube of a syringe is 1000 mg of water.

In the case of medications, the amount of mg in 1 ml and in 1 cube of a syringe will depend on how much active substance is in 1 ml of solution.

This information is usually indicated on the annotations for the medicine.

The drug Gentamicin. On the packaging you can see the following information:

"Solution for intravenous and intramuscular administration 40 mg/ml."

"Solution for intravenous and intramuscular administration 80 mg / 2 ml."

This means that in 1 milliliter there will be 40 mg of the active substance (gentamicin sulfate).

If the single dosage is 100 mg, then for injection you need to draw 100 / 40 = 2.5 milliliters or 2.5 syringe cubes.

1 cube is the colloquial name for one cubic centimeter, i.e. this is a unit of volume, and therefore for liquids or bulk substances this unit will always be the same, no matter what it is: water, sour cream or sand, there will always be the same volume in the same container. A milliliter is also a unit of volume and is equal to exactly one cubic centimeter. In other words, 1 cube = 1 cubic centimeter = 1 ml. But the weight will depend on the density of the substances; the higher it is, the greater the weight will be in one unit of volume. For example, 1 ml of water is equal to 1 gram, but sunflower oil has a higher density than water and therefore the weight of 1 ml of oil will be more than 1 gram, therefore 1 cube is equal to 1 ml, but the number of milligrams will depend on the density of the substance that is being measured .

Cube is a kind of slang that is used in medicine. In fact, there is no such official measure of volume or mass. A cube is one milliliter of a certain solution. That is, when they say that you need to inject a cube of drugs, they talk about one milliliter.

Accordingly, when purchasing the syringes themselves, they ask how many cubes this manipulation tool is needed for.

As for the mass, nothing can be said for sure; this parameter will change. Still, solutions have different densities, which means that with the same volume they will have different masses. And we rarely see exactly the mass of the injected drug. Even if we are talking about powder, we still use a solvent.

A cube is a colloquial term for one milliliter. That is, 1 cube is 1 milliliter of medicine in liquid form in a syringe.

It is more difficult to convert the number of milligrams into a cube - it depends on the medicine. Usually the annotation indicates how many active substances and auxiliary components in grams are contained in one milliliter of the medicine.

While in the department (regardless of which one - therapeutic, surgical, cardiology, intensive care), one way or another you have to deal with injections.

Procedure nurses and other nurses most often use this word - cube (2 cubes, 5, 10 cubes, etc.).

A medical “cube” is a milliliter:

1 cube is 1 ml;

2 cubes is 2 ml;

5 cubes is 5 ml.

For example, to make a cube of analgin - inject 1 ml of analgin.

As for mg, it (the amount of substance) is determined by the percentage of the substance in the ampoule/vial.

1 cube syringe is how many ml

5 cc syringe Pavel S ()

INSULIN SYRINGE. Ask at the pharmacy Inna Solodilova ()

For a 3 ml solution, it is more convenient to take 5 ml syringes, there are divisions (on the syringe) - everything is labeled 1,2, 3,4,5 - this is ml, you need to draw enough solution through the needle so that the liquid ends at mark 3 Downstream ( )

Usually 1ml = drop. There are special “sticks” that end in a round tip, which is usually how they drip. Zaretskii Kostya ()

1 ml is 1 cubic cm of liquid. If this liquid is water, then this = 1 gram.

How many grams is 1 cube in a syringe?

The volume of the syringe and the medicine in nm is measured not in grams, but in milliliters, so it is impossible to give an exact answer, since all medicines have different mass and density. One cube contains one milliliter, and the number of grams of medicine can be found in the annotation.

One cube is the colloquial term for one milliliter or one large division on a syringe. One milliliter of water weighs approximately one gram. That is, one syringe cube contains one gram of water. Medical preparations based on an aqueous solution will weigh approximately this much, since the content of denser active substances in them is several times less and has practically no effect on the weight of the cube. Even if an alcohol solution is indicated on the package, you should remember that this is a very low percentage alcohol solution and there is still more water in it. So count one cube as one gram and you won't be much mistaken.

You can find out how many grams of active substance are contained in one cube (in 1 milliliter) on the medicine packaging. In front of me now is a package of diclofenac, 1 cube contains 25 mg of active ingredient. Each drug has a different dosage.

1 cube in a syringe is 1 milliliter, and how many grams of the active substance is written on the injection box.

One cubic centimeter is called a cube of medicine, but the cube holds different numbers of grams. Medicines administered through injection have different ratios of grams to milliliters. To do this, you need to look at the instructions or packaging; the recommended number of milligrams is indicated there, and the definition of a cube is used by experienced doctors and nurses.

A cube is a measure of volume equal to one cubic centimeter. A gram is a measure of mass. There are approximately 250 milligrams in one milliliter. And in order to calculate accurately, you need to read the information about the density on the packaging and perform simple arithmetic operations.

Everything will depend on the density of the liquid itself. Still, the chemical composition of each medicine is different, the concentration of the various components is not equal, so it is impossible to say exactly how many grams are in one cube.

Those. in order to find out the amount of the substance in grams, you must refer to the instructions for the medicine/injection liquid. Plus, usually manufacturers indicate the active active ingredient separately in grams (i.e., the main one), and separately the auxiliary components, also in grams.

See the photo above as an example. The data is not written down here, as in injections, but the active substance and auxiliary substances are clearly visible in the photo.

If we talk about water, then in one cube there will be 1 ml - volume and 1 mg - weight. But for other liquids, the mass in mg may vary, since it also depends on the density of the substance. But this information must be on the medicine packaging.

When they say one cube, they mean one cubic milliliter. If we take one cube of water as an example, its weight will be 1 gram. For medicines, the weight of the cube will depend on their composition. Usually the packaging indicates how much all the components included in a cubic millimeter of medicinal solution weigh.

How many ml in a syringe cube

Sumamed was prescribed, but I can’t figure out how much to give it, there is a suspension of 100 mg/5 ml dosage for children: at the rate of 10 mg/kg body weight once a day, the child weighs 22 kg (5.5 years old), how many milliliters should I give the child? The set includes a measuring syringe up to 5 milliliters. I can't think straight :(. The topic has been moved to another conference, it is recommended to discuss it there! When writing a new topic, please stick to the topic of the conference.

Dilution of medicine for injection. Pediatric medicine

Dilution of medicine for injection. Medicine and health

The child was prescribed injections of Cortexin 10 mg, it is in the form of a powder in a bottle, just as much as we need, and the medicine needs to be diluted with novocaine so that it does not hurt. novocaine - it is written on the package injection solution 5 mg/ml/10 ampoules of 5 ml/, The doctor prescribed novocaine 0.5% -2.0, i.e. for dilution, do I need to take a little less than half an ampoule of novocaine? Or am I wrong?

It’s easier to buy a 2.0 ml syringe; by shading you will definitely get 2.0 ml

Can you take a break from the big stuff and help me with a small everyday problem? :-)) For example, I need to give my little boy 20 drops of syrup 20 minutes before meals. And he consumes all his food in the garden. So how can I technically give him these 20 drops right in front of the garden gate? Should I just drop it onto a spoon or are there other methods that are still unknown to me? 🙂

Urgently. Pediatric medicine

what is “draw 8 units into an insulin syringe” (we are treating an animal)

what is written on the stripes?

Who gave the injections to the child, a question for you. Child from 1 to 3

Please advise. My daughter is 1 year and 3 months old. They prescribed intramuscular injections, 1.2 cc of medicine (I use a 2 ml syringe). Do I need to attach another needle for intramuscular injections or can I inject with the one that comes with the 2 ml syringe? It is 7 mm long less than the “intramuscular” one from a 5 ml syringe, but my mother says that IM needles should be used even for infants to avoid bumps (a pediatrician told her so at one time). The needle from a 2 ml syringe is thinner and about 3.5 mm long. It's easier for me.

How to drink bacteriophage? Child from 1 to 3

Girls, please give me some advice!! We were diagnosed with Staphylococcus aureus. You need to drink bacteriophage. But the problem is that the last time we drank it was in infancy from a syringe, and now we are 3 years old and under no circumstances does our daughter want to drink it (it tastes bad and smells disgusting). I stuffed half a spoon into it, and it vomited :-(. No matter what I diluted it, the smell remained. Tell me how to take the medicine. It’s very necessary.

Tell me about peptides, please. SP: get-togethers

Please tell me who is in the know))) How to mix them. There is a set for expression wrinkles and a moisturizer. I sit with them like a monkey with glasses. Do you pour all the contents of the ing into the base or do you need to measure something with syringes? I couldn't find a leaflet with instructions. Heelp!! PS. The peptides were collected here, if anything)))

Consider, as an example, a recipe for a serum against expression lines:

Matrixyl Synthe’6 2%

Since we are only adding 6% of the actives, we don't need a thickener or preservative.

We take a standard package of 50g or 20g and calculate the % input for each component

To find out the weight of assets for input, we must multiply 50g/20g by the required % of the asset

If you have a 20g package, then 0.2x4=0.8g

For Matrisil: 0.5x2=1g (for 50g), 0.2x2=0.4g (for 20g)

You can measure all the components with a regular syringe from the pharmacy (they are sterile), after removing the needle. It is better to take a separate syringe for each component.

This cream can be stored in the refrigerator for 6 months. Without the risk of losing its properties, rancidity or violation of microbiological standards.

cedex. Child from 1 to 3

They prescribed Cedex for otitis media, 2 ml. Everything there is in mg. It’s a suspension. Question: 1 mg = 1 ml or not?

Please help me, how much to “hang in grams” is the medicine..

Sumamed was prescribed, but I can’t figure out how much to give it, there is a suspension of 100 mg/5 ml dosage for children: at the rate of 10 mg/kg body weight once a day, the child weighs 22 kg (5.5 years old), how many milliliters should I give the child? The set includes a measuring syringe up to 5 milliliters. I can't think straight :(.

Probably like this: 10mg*22=220mg, i.e. 11ml.

It turns out, 2 measuring syringes and another 1 ml.

How to give medicine to a child: 5 rules. Health of a child up to one year

Children's medications are also often produced in the form of rectal suppositories, and in order to administer them, you will need some skill, but this procedure is not at all difficult for moms and dads. What, how much and how often Before giving your child medicine, carefully read the instructions for its use. Read what the drug should look like, its consistency, and be sure to check the expiration date of the drug. Pay attention to the storage conditions of the drug: some medications must be stored at a certain temperature, without access to light, or even in the refrigerator. Ask your doctor in detail in advance about the dosage and how much.

You cannot independently reduce or increase the dosage of the drug or complete the course of treatment earlier than recommended by the doctor. We measure correctly Never give medicine by eye. If a special measuring spoon or dispenser is attached to the drug (usually it comes in the form of a graduated syringe), it is better to measure the medicine with them rather than with ordinary cutlery (a teaspoon or dessert spoon). This is more convenient (it’s easier to take the medicine from a bottle with a dispenser), and there is no risk of making a mistake with the dosage. Use the measuring device that comes with this medicine: you should not take a dispenser from another medicine, even if outwardly it seems to you that it does not mean anything.

Questions about EPI for Ukrainian women and not only. Other children

There are a lot of questions, little time, so I’m throwing everything into one topic. Manyunya and I are now in the hospital. We ended up with a series of severe attacks, were supposed to be discharged on Thursday, and then it hit us: (In general, it’s just terrible. We drink 3 cubes of Depakine syrup (I measure it with a syringe) and now we’ve added Lamictal, one-eighth, twice a day. Increase the dose And the little one is getting worse: (Yesterday our doctor talked to me. They suspect that we don’t just have epilepsy, but that it’s caused by a genetic disorder, c.

Our non-geneticists have also seen all sorts of genets. signs - whatever we didn’t suspect, and “happy doll syndrome” because of the beautiful face and long eyelashes, and our sky is really gothic :)))

But neither the kareotype nor the amino acid analysis showed anything :))

How to pour perfume? SP: get-togethers

Girls, I remember purchasing molds from us. How did you bottle them? I really need to share the perfume))) and where can I buy empty bottles? Thank you

For me, unscrewing turns out to be final - I have to pour everything out

Survey about CORTEXIN. Other children

I searched and searched, read something, but I still want to make it a separate topic. Girls, who injected their children with CORTEXIN? It is advisable to write point by point :) The questions are: 1. Dosage and frequency. How many days is the course, every other day or every day? 2. What did they breed with? Novocaine or saline solution? 3. How did the children tolerate the injection itself? Is he sick? 4. Diagnosis of the child. 5. Results (positive) after the course, if any, what were they? 6. Side effects, deterioration - if yes, what?

Please help me calculate the dosage of the medicine. Pets

for my dog, 3 kg. You need to add cocarboxylase to the dropper at a dosage of 0.02. It is sold in a dosage of 50 mg. Neither the doctor nor the pharmacists at the pharmacy could really tell me how to get 0.02 as a result. The package contains ampoules with 50 mg cocarboxylase powder and 2 mg ampoules with water for injection. I asked at the pharmacy if I should take 5 ml spirtz. no, you need 2 ml. I read the instructions - it says dilute in a 5 ml syringe. but that's okay, let's buy it. how to measure 0.02? For some reason they told me that.

5 milligrams - how much? Child from 1 to 3

Girls, who knows, 5 milligrams is how much - a teaspoon or less? Otherwise, the doctor prescribed us a medicine, and it says - give a single dose - 5 milligrams.

How much pyrantel for prevention? Pediatric medicine

I bought pyrantel suspension for my child. I didn't understand anything from the instructions. ASCARIDOSIS AND ENTEROBIOSIS. MIXED INVASIONS - once at a dose of 10 mg per kg. Next is the table (I remove the unnecessary, the child is 3 years old) age dose of the drug number of 2 years - 6 years 250 mg 1 measure = 5 ml ANKYLOSTOMIASIS: prescribed at a dose of 10 mg per kg for three days NEKATOROSIS: for severe forms, prescribed at a dose based on 20 mg per kg for three weeks. I don’t understand how to give it to a child for prevention (it seems to me that...

It must be given once. All family members should drink Pirantel at the same time. For adults, the dose is also determined to be 10 mg per kg, or if an adult weighs up to 75 kg, 15 ml of Pirantel is needed, i.e. 3 measurements.

Clean your home. Change your underwear.

To relieve itching, wash your child and apply at least some baby cream. If you suspect that your child has pinworms, then this is not prevention, but treatment. If there are no worms, then the drug does not work on missing worms, i.e. it will not prevent the appearance of worms.

I simply explained the doses to you, this is not advice to take or not take the drug - it should be your decision.

Supplementary feeding: in what cases is it worth additionally feeding the child?

After some time, he may become ravenous and eat much more. The baby's stomach is used to a small volume of milk, so it will take several days before it can accommodate more food. Slow bottle feeding gives your baby the opportunity to stop eating when he's full. Within a week, you will understand how much supplemental feeding your baby needs at different times of the day. Offer supplementary feeding first, then breastfeeding. Some babies breastfeed better on a full stomach. If the baby has not gained weight well, he needs not only to grow, but also to catch up. Accelerated growth requires more food, so it is not surprising that the baby eats so much at first. Rapid growth at this time will be noticeable along a steeper curve.

Devices for supplementary feeding of an infant Supplementary feeding method Pros Cons Comments Spoon An easy and quick way for a small amount of supplementary feeding. Labor-intensive and inconvenient for large amounts of supplementary feeding. A good way to supplement with colostrum. Pipette, disposable syringe or periodontal syringe with a curved end (convenient to use for breastfeeding) An easy and quick way for a small amount of supplementation. Labor-intensive for a large volume of supplementary feeding. Place your baby on your lap so that his head is elevated. Place your feet on a coffee table, etc. During supplementary feeding, let your baby suck his thumb. Make sure that the tip of the syringe or pipette does not touch the baby's palate or cheek. Not much.

Sperm: the struggle for quality. Analyzes and examinations before.

Quantity and quality The first thing that is determined in the laboratory is the liquefaction time of the ejaculate. At first, the sperm is absolutely liquid, then it quickly thickens, and after some time, under the influence of prostate enzymes, it becomes liquid again. The correctness of the transformations can be judged by the change in viscosity. To do this, the ejaculate is drawn into a syringe and released through a special needle. Viscosity is measured by the length of the “thread” that follows the released drop. Sperm is considered liquefied if the “thread” does not exceed 2 cm. Normally, this occurs within 10–40 minutes. If the process is delayed, then? there are problems with the prostate gland. After liquefaction using indicator paper, the semen is tested for acidity. WHO recommend.

How many 30 drops are in milliliters? About yours, about your girl’s

At my request, my husband bought Morozov drops (those that help fall asleep) in the production department of the pharmacy, so these goats (I can’t call them otherwise) are now packaged in ordinary bottles that do not allow dripping through the lid. Just measure out 30 drops the way you want:((If only they had warned him, he would have taken a pipette. There is an idea to mark with a syringe, but I can’t find the volume of the drop.

Young mother, or the first days in the maternity hospital. Adjusting the chest.

They determined the norm at 40 g for each feeding and told her to wake up and feed Anya every 2 hours, counting from the start of feeding. A bottle was urgently purchased and I started pumping. But now, because colostrum began to be replaced by milk and my breasts were full for the 4th day, I began to experience stagnation. I couldn’t squeeze more out of my bust, which was swollen like two pillows, no matter how much I crushed it. Even the maternity hospital electric breast pump, which hummed at full power, but only squeezed out a couple of drops, did not help. By that time, the mechanical one that had been given to me was already at home, and there was no way to pick it up. If I couldn’t get milk, then what was it like for my weakened daughter to do it! One of the weighings, for example, display.

Well done you for fighting. The husband is gold. I wish you all more joy.

Just what the doctor ordered. We give medicine to the baby.

It is unacceptable to use drugs that have expired, were stored incorrectly, have signs of spoilage, or have erased or illegible inscriptions. Rule three: follow the dose, time, method of administration, frequency and duration of use of the medicine prescribed by your doctor. Before the doctor leaves, check whether you understood the dosage regimen correctly: how much, how, when (before, during or after meals), how often and for how long the child should take the medicine. Never give medicine “by eye” - measure the prescribed dose using a special measuring spoon, graduated pipette, measuring tube or syringe without a needle; Before giving medicine to your child, check that you have measured the dose accurately. Use only clean measuring cups. Taking medications should be regulated.

If there is such a need, then divide the tablet very precisely with a sharp knife. For a more accurate dosage, you can use a disposable syringe without a needle. For example, a child needs to be given 1/8 of a tablet: draw exactly 8 ml of boiled water into a syringe, release it into a cup, then crush the whole tablet and dissolve it there, then draw only 1 ml of solution into the syringe from a cup and let the baby drink. The solution prepared from crushed tablets can only be used immediately after its preparation - it cannot be stored and is used once; For the next dose of the drug, the solution is prepared again.

Not enough milk? It's worth looking into! Part 1. Establishing breastfeeding.

The use of breast substitutes: pacifiers or bottles with a nipple. A simple rule works here: “sucking the nipple - minus feeding (minus breast stimulation for sufficient lactation and minus a certain amount of milk for the baby).” Supplementing the baby with water and/or other liquids. It is obvious that no matter how much the baby drank, he did not eat the same amount of mother’s milk. Water fills a tiny stomach and gives a false feeling of fullness. It is known that plain water (not the kind found in mother's milk) is not absorbed by the child, i.e. has nothing to do with the prevention or treatment of dehydration, but only passes through the baby’s gastrointestinal tract, washing away the flora that breast milk “helps populate.”

Neither more nor less. How much amniotic fluid is needed?

Oligohydramnios and polyhydramnios during pregnancy. Possible complications, features of childbirth

The increase in volume occurs unevenly. In the first trimester, at 10 weeks of pregnancy, the amount of amniotic fluid averages 30 ml, per week - about 100 ml, at 18 weeks, etc. The maximum volume is observed in the second week of pregnancy, averaging ml. By the end of pregnancy, the amount of water may decrease to 800 ml as a result of increased fluid excretion from the woman’s body. Amniotic fluid performs a number of important functions. They create conditions for the free movement of the fetus, protect its body from adverse external influences, and protect the umbilical cord from compression between the fetal body and the walls of the uterus. Thus, the volume of amniotic fluid is a kind of indicator of the normal course of pregnancy. What.

Parent handicrafts. Part 2. Caring for a child up to one year old

How to care for and treat a baby at home.

Moreover, if the drops are placed in a sterile bottle, then we have the opportunity not to break its seal: we wipe the rubber stopper with alcohol, pierce it with a needle and draw it into a syringe. Remove the needle from the bottle and disconnect it from the syringe. As a result, we have a container with a sterile solution. A container that does not spill or break, which is convenient to heat and convenient to use. Nose In order for the medicine to have an effect, it is a good idea to clean the nose first, if, of course, there is an accumulation of mucus in the nasal passages. Children of conscious age

Artificial feeding. Artificial feeding

How to correctly calculate the required volume of the mixture? When artificial feeding, it is important to determine the required amount of nutrition for the child. The daily amount of food depending on the age of the baby is shown in table 1. For example, if the baby is 1 month old and weighs 3500 g, then the daily amount of food is 1/5 of body weight, i.e. 700 ml. To determine how much formula you need per feeding, divide the daily amount of food by the number of feedings. Approximate number of feedings during the day: first week of life - 7-10; 1 week - 2 months - 7-8; 2-4 months - 6-7; 4-9 months - 5-6; 9-12 months - 4-5. It should be noted that if during breastfeeding.

I'm a mom in a cube! Multiple pregnancy

Mom in a cube: the real story of an ordinary woman who successfully carried and gave birth to triplets, while maintaining an excellent sense of humor.

And now - one is yelling, the second is sleeping, the third has crap himself. Who should I run to, what should I do? I'm in the hospital. I’m lying alone in the ward with three others. Thanks to the maternity hospital, I at least learned to swaddle there. The seam hurts, my head is spinning, but I have to wash the floors not only in my room, but also in the common kitchen, run with three to the treatment rooms and to the doctors’ offices, which are located on different floors, hand over and receive diapers, keep a diary, when, who and how much he ate and peed, collect urine, carry the babies every day for control weighing and weigh them herself after each feeding. I don't have a second to sleep. At night the worst thing begins. The kids have a tummy ache and they howl in unison. “This will pass by three months. Or maybe we won’t make it to three,” the nurse on duty says distantly and slowly leaves. I'm going crazy. Last

Kogitum - can open ampoules be stored? Other children

Cogitum was prescribed, 1/4 ampoule 2 times a day. Considering the price of the drug, I would like to use the ampoule for at least a day, or even better, for two. Can it be stored open, has anyone checked? Thank you

Mom is giving injections - I need help. We need your experience and knowledge.

Who has experience in this matter? I need your help, otherwise my brain is about to boil :) We prescribed a course of treatment for the child, prescribed a bunch of medications, incl. you need to give injections: 1. Cerebrolysin 1.0 ml intramuscularly 2. Actovegin 2.0 ml intramuscularly 3. Neuromidin 5 mg 0.5 ml intramuscularly The injections will have to be given to the mother, i.e. to myself. I’m terribly afraid, and I’ve never given injections myself in my life. I only have experience in diluting Cortexin injections and, accordingly, I saw where to inject and how to administer. Those. With.

Please convert drops to ml. SP: get-togethers

You need to give the child 10 drops of medicine, but there is no pipette:-(there is a syringe. If you are not too lazy, please measure how many ml to give.

The child refused the breast. Part I. Weaning

Over time, with regular feeding, the nipple takes on a normal appearance. If that doesn't work, feed with feeding pads. You can try to pull out the nipple. True, it was better to start doing this before giving birth. Make a simple mechanism: remove the piston from a 5 ml disposable syringe, use a knife to cut off the part of the syringe where the needle is inserted to make a tube. Insert the piston into the cut end. Place the free end (where the finger rests) on the nipple and pull the plunger so that the nipple is pulled into the syringe. Leave it for a while. With regular exercise, the nipple will stretch. Different breasts Reason. It is easy to suck on one breast, but difficult on the other for some reason.

©, 7ya.ru, Certificate of registration of mass media El No. FS.

Reprinting messages from conferences is prohibited without indicating a link to the site and the authors of the messages themselves. Reproduction of materials from other sections of the site is prohibited without the written consent of ALP-Media and the authors. The opinion of the editors may not coincide with the opinion of the authors. The rights of authors and the publisher are protected. Technical support and IT outsourcing are provided by KT-ALP.

7ya.ru - information project on family issues: pregnancy and childbirth, raising children, education and career, home economics, recreation, beauty and health, family relationships. The site hosts thematic conferences, blogs, ratings of kindergartens and schools, articles are published daily and competitions are held.

If you find errors, problems, or inaccuracies on the page, please let us know. Thank you!

How many drops are in 1 syringe cube?

Very often you may encounter a situation where you need to add a certain number of drops, but there is no dispenser or no pipette.

Usually in this case they use a syringe, since the Internet is full of information that one drop is 0.05 grams, and there are 20 drops in one milliliter. But when counting drops like this, it’s easy to make a mistake and add a significantly larger number of drops than required. After all, the volume of droplets depends on the viscosity of the liquid. For example, if a drop of water really equals approximately 0.05 grams, then a drop of valerian tincture already weighs 0.02 grams and therefore in one cube there are not 20, but 50 such drops. But for example, ambrobene fits only 15 drops into one cube. So it’s better to still use a dispenser.

What is a cube? This is 1 milliliter.

What is a drop of water? This is one fiftieth of a milliliter (1/50).

This means there are 20 drops of water in 1 cube. Everything seems simple and clear, but some solutions (alcohol tinctures, plant growth stimulants, aromatic additives for electronic cigarettes, etc.) have a completely different drop volume.

Such a concept as "cube" means 1 cubic meter. cm. 1 syringe cube contains 1 milliliter.

The number of milliliters contained in the syringe may vary. For example: 5 ml., 10 ml., 20 ml. etc.

To determine how many drops are in 1 cube of a syringe, you need to remember how many drops are contained in 1 ml.

This amount will vary depending on the viscosity of the substance (liquid).

If you take 1 milliliter of water, then it contains 20 drops.

Accordingly, 1 cube of the syringe will contain 20 drops of water.

In 1 ml. other substances will, as a rule, contain more drops than in water - accordingly, 1 cube of a syringe will also fit a much larger number of drops.

1 ml. ether - about 60 drops.

1 ml. alcohol - about 40 drops.

It depends on what you will drip from and what exactly to drip from. If you drip directly from the syringe, it depends on the diameter of the needle that you insert into the syringe, as well as how you will position the needle: vertically or horizontally, as well as on the temperature of what you will drip.

Since manufacturers of drugs that measure in drops do not indicate how many ml are in one drop of this particular substance, counting the number of drops in one cube of a syringe is quite problematic. Based on general information:

  • 1 ml of aqueous solution - 20 drops;
  • 1 ml of alcohol solution - 40 drops.

For example, 1 ml of saline solution will be approximately the same as water: 20 drops. But 5 percent iodine has a volume of one potassium of 0.02 ml and in 1 cube there will be as many as 50 drops.

The concept of “cube” is used in medicine and almost always means 1 ml of any drug solution.

So, the doctor can tell the nurse “make 2 cubes of analgin and a cube of diphenhydramine,” which means 1 ml of diphenhydramine + 2 ml of analgin.

Drops in 1 cube - 1 ml, approximately 20 drops of water (saline);

The number of drops in a cube of other solutions may vary.

How many drops of ASD are in 1 ml syringe?

Hello! The following question interests me: how many drops of ASD are in 1 milliliter of a syringe? Are there differences in the number of drops in one cube if, for example, fraction 2 or 3 is used?

In general, which syringe is best suited and will be more practical: a large one or maybe a small insulin one? Thank you.

The droplet size depends on the diameter of the dropper, the viscosity and the force of the liquid supply. In one milliliter (cube) there are from 35 to 40 drops of ASD-2. It is better to measure liquid in milliliters with a syringe (any kind), but it is more convenient and more accurate to count drops with a pipette.

Men's and reproductive health

Having drawn 1 ml into an insulin syringe without a needle, carefully scoop out its contents, while counting the number of drops. For such purposes, I always have an insulin syringe in my first aid kit. I remove the needle from it and take out one cube of the medicine that needs to be instilled. In this case, it will be difficult to measure exactly 30 drops of a particular medicine using a syringe or a teaspoon, which, as you know, holds 5 milliliters of water and therefore 100 drops.

Usually the question of how many drops are in 1 ml arises among those who have been prescribed to take a certain medication in milliliters, although there is no corresponding dispenser in the package. If the dose of a pharmaceutical product is more than 5 ml, then it is more convenient to use cutlery rather than a syringe for its consumption. Good afternoon Many people write that they drink ASD-2 in drops, but how to get it from a bottle is divided into ml in a syringe. How to take, for example, 5 drops, tell me. You can use a straw, take the medicine into it and, holding the tip, gently drip it into the glass, counting drops of the medicine. I need to measure the medicine in drops, but so as not to open the bottle and there is no contact of the medicine with air. The second option, which takes longer, is to dip your finger in the drops and count how many drops it drips into the spoon. But this is a ridiculous method that is better not to use, it is inconvenient.

I also added a dose of 1 cc. and there are some side effects (it’s hard to breathe, fatigue quickly), but I’ll just lower the dose so that all the nasty stuff comes out more smoothly. In the last 2 days of treatment, I had a severe headache and my teeth began to ache, in which there are no nerves. I think I overdid the dose. Today I finish drinking for the fifth day, my head doesn’t seem to hurt, but there is some heaviness. I will still reduce the dosage. Sasha, does your head hurt? I feel pain from the overly large dose, but unfortunately, at that moment I didn’t think to measure my blood pressure. My head and teeth stopped hurting from the reduced dose. For the third week I will drink 3 units.

Tomorrow I’ll probably buy another syringe to make it clearer, otherwise I’m measuring everything drop by drop! But you still need to read the book! Sasha, you should probably read the book too. I think I went too far with the dose, so today I started the second five-day regimen of 7 drops in the morning, drinking water, although I couldn’t bring myself to do it before. Today I was the first to start giving 3 drops and I think maybe I won’t have time. Maybe you need to give more? They just ask a lot of things, there are already answers, you just need to read from the 1st review and, by the way, you will learn a lot of interesting and useful advice. Who knows, wait and it will decrease or pump it out as the doctors advise. But they don’t treat him differently as a suicide bomber. My husband’s strength increased after two days of taking ASD, but he began to choke at night, probably because there was more fluid there. I read another forum today, again the opinions are 50/50. But in any case, increasing the dose without knowledge is risky, I’ll slow down, maybe next. five-day day. But spoons are also different, there is no exact standard for them, some are larger, others are smaller. If you are not lazy and read all the previous reviews, this was discussed there.

How many drops of asd in 1 cube of syringe

and much more about how to maintain a healthy lifestyle

ASD-2 fraction

  • < Назад
  • Next >
  • Page 17 of 21

While you are waiting for the operation, you should not waste time, be treated according to E. Lebedev, take Todikamp, ​​celandine, hemlock, do not waste valuable time, diet, cleansing is the main thing, the operation must be done, and chemistry and radiation - in no case. My sister was cured of breast cancer with Todikamp, ​​and nothing has bothered her for several years now. If you have any questions, write:

I also don’t know how ASD-2 is produced, its composition, etc. But I briefly came across information that the production of ASD-2 is somewhat similar to the production of tar. This means that carcinogens are present. It is in this sense that ASD-2 is considered poison. I have not double-checked this information for accuracy. But I think it is a couple of clicks away from each of us - easily accessible.

What carcinogens are is a separate topic.

Everywhere we are talking about drops, but when taking a syringe, how many cubes are there, if you start taking with 10 drops - how many cubes will it be in the syringe?

I apologize if the question seems stupid)) please answer me!

Thank you for your answer! My son was planning to take it for prevention, but I’m still in doubt (at my own expense), and another question arose. I read here that it is believed that ASD thickens the blood. I have chronic thrombophlebitis of the deep veins of the lower extremities, varicose veins. Prothrombin index is within normal limits, but maximum. After consulting with a phlebologist, I have been taking phenylin (to thin the blood) for quite some time. I am 54 years old. Can ASD help with this problem (varicose veins, thrombophlebitis), will it be worse if it really thickens the blood? I mean exactly 2 fractions (for oral administration)

How many drops of ASD 2 in 1 syringe cube

Please indicate how many drops of ASD of the 2nd fraction are in one syringe cube (in 1 milliliter)?

The size of the drops depends on the diameter of the hole in the dropper with which you will measure, as well as the properties of the liquid. A standard dropper contains 1 ml (cube) of water - 20 drops. ASD is approximately a drop, but again, this is not exact, but approximately. In your case, there is only one way to find out exactly - to count yourself.

All rights reserved. Copying of material is only possible

Comments

The first day they refused to drink, then she didn’t give succulent food, they involuntarily began to drink, two days later they drank with pleasure (a cube of the drug per liter of water for them to drink). The animals became happier, so to speak, at the end of winter, the females gave birth safely, all milk and They made nests. The males began to actively chase the females, the male was 7 years old, his gray hair had subsided, and he was rejuvenated.

People don't drink that kind of crap. I won’t list them.

Subjective sensations after taking the drug are as follows.

The joints feel lubricated, there is a feeling of youth, the skin is smoothed out from wrinkles, I want to do cleaning, I took Hollenzyme, Allochol for a decade - I had gastritis (gone forever, no stomach problems)

I noticed that when I took it, there was a stable weight loss, I lost 1 kg a day, minus 7 kg in a week, my appetite for food was moderate.

A person looks younger before our eyes, abrasions heal quickly

If anyone wants to try to feel youthful or lose a couple of decades, then with ASD 2 you can try this. back to my youth for a month.

There is no need to hide such a drug from people, it replaces many other medications and pills, and gives hints about proper nutrition.

In men, sexual functions are normalized, this is what they write about the drug on all forums, but I’m making a conclusion about rabbits.

I think every home should have it on hand just in case.

An excellent drug at an affordable price, this is not an advertisement, but a personal conclusion.

10 drops of asd2 how much will there be in an insulin syringe syringe up to 100 units

Google how many 10 drops of AD2 are in milliliters. An insulin syringe usually contains 1 ml, no matter what scale. 40 units or 100. There are also 2 scales at the same time, in units and milliliters. Well, count it.

From the Internet, haven’t checked (!) - “1 ml of insulin syringe contains 30 drops of ASD-2″

This means 10 drops is approximately 0.33 ml. Then in an insulin syringe for 100 units (one hundred, not forty), you need to dial 33 divisions, units.

To be sure, you still need to drop one drop directly into the syringe, removing the plunger, and then use this mark without fear.

The writing is on the wall

1 cubic centimeter (or colloquially - cube) = 1 ml. There are 30 drops of ASD-2 in one milliliter. There will be more water because the density of water is less.

There are, respectively, 15 drops in half a cube.

It is very convenient to draw up ASD with a 3-cc syringe.

There are 10 divisions in the cube. Each division is 3 drops. Half a cube 5 divisions and 15 drops.

Even those who are taking ASD-2 for the first time can start with 3 drops.

I even give this to my cats, and their weight is much less than that of a human.

The dose of ASD-2 should be increased gradually. For example, spend the first five days on 3 drops, take a break of 3 days. For the next five days, take 3 drops twice a day. Monitor your well-being. If everything is in order, take 3 drops 3 times a day for the next five days. That is, the dosage is changed by increasing the frequency of administration, and not by increasing the dose per se.

This is for beginners taking ASD-2.

The maximum dosage is calculated as follows. For two kilograms of weight, take 0.1 ml of ASD-2.

That is, if a person weighs 80 kg, the maximum dosage will be 4 cubes.

But, again, everything is very individual. It all depends on the complexity of the disease, individual perception of ASD-2 and other reasons.

All cats react differently to ASD-2. From a short smack to somersaults with turns in the air. Give strictly before meals, otherwise he will vomit.

1 ml – 20 drops

5 ml – 1 teaspoon – 100 drops

10 ml – 2 teaspoons – 200 drops

15 ml – 1 tablespoon – 300 drops

30 ml – 1 ounce – 2 tablespoons – 600 drops

240 ml – 1 cup – 16 tablespoons – 3600 drops

Search the Internet for a way to treat osteomyelitis using ASD-2. There are reviews there.

It makes no difference whether the infection is in the shin bone or the jaw bone.

It may have been used in conjunction with other drugs. And a real boom arose around the Dorogov faction. Thanks to the efforts of its creator, a tissue therapy laboratory was built in Moscow.

However, Dorogov’s attempts over the years to obtain official permission to use ASD did not lead to it. Moreover, he was dismissed from his position, the laboratory he headed was closed, and Alexey Vlasovich Dorogov died under mysterious circumstances.

Since then, the ASD-fraction drug has been quietly existing for more than 40 years. It is not advertised, but it is not prohibited either. Many doctors have never even heard of it. Many applications of ASD-2 and ASD-3 have been lost.

The drug could have sunk into oblivion if not for the efforts of Olga Alekseevna, Dorogov’s daughter and also Professor N.N. Aleutsky from Arkhangelsk, healer V.V. Tishchenko from Simferopol and oncologist SV. Korepanova from Barnaul. Having each created their own method, they have saved and are saving thousands of cancer patients with the help of ASD. In her book “Panacea for Cancer, Heart Attack, AIDS” Tamara Yakovlevna Svishcheva regrets that official medicine has not yet recognized the faction. It is sold only in veterinary pharmacies and is intended for the treatment of animals. Unfortunately, it does not come with instructions on how to take it. Therefore, it is very difficult to self-medicate.

Dorogov's antiseptic stimulant has an antibactericidal effect, strengthens the immune system, and accelerates the regeneration system of damaged tissues. There are fraction 2 (for internal use) and fraction 3 (for external use).

ASD-2 is used for all female diseases, including frigidity, infertility, relieves drug addiction, treats the “second heart” of men, prostatitis, helps with impotence, psoriasis, tuberculosis, arthrosis, multiple sclerosis, heart attack, stroke, cardiovascular pathologies, for ulcers, gastritis, colitis, helminthic infestations, bacteriosis, for kidney disease (nephritis, pyelonephritis), liver disease, restores damaged tissue, helps with periodontal disease and tonsillitis.

Particularly good results were obtained when douching the vagina with ASD-2 solution: because it not only destroys trichomonas and chlamydia, but also removes fibroids, fibroids, erosions, uterine and cervical cancer, and promotes the birth of healthy children. It was after the effective disposal of trichomonas in women that the massive, but unofficial use of ASD-2 began, then in the 50s.

I would like to introduce readers to the scheme of intensive comprehensive treatment of cancer proposed by prof. N.N. Aleutsky, He agrees with the Austrian healer R. Breuss that the first step is to remove camphor, naphthalene, various aerosols and chemical preparations from the apartment to fight cockroaches, mice, moths, mosquitoes, ants, etc.

Next, the cancer patient needs to undergo a course of treatment with hemlock according to the “Tsar’s” method of V. Tishenko. Be sure to take sage infusion and tea prepared according to R. Breuss. (G.G. - See volume II of the book “Healers of Russia from Our House.”)

And take the drug ASD-2 according to one of the regimens proposed by prof. N.N. Aleutian. Do not open the bottle (fill with a syringe), store on a plate in the freezer.

1st option (gentle): dilute 1 drop of the drug in 50 ml of warm boiled water, drink and wash down with oregano infusion (1 tsp of herb per glass of boiling water, leave for 40 minutes). ¼ cup of infusion per dose is enough. Increasingly increase the number of ASD-2 drops per dose to 5 and then take the remedy 4 times a day, 5 drops before meals. The course of treatment is 25 days. Then take a 10-day break, and during these days take metronidazole (Trichopolum) - 1 tablet 3 times a day.

How many milliliters are in an insulin syringe?

The most accessible method of administering insulin to hormone-dependent diabetics is the use of special syringes. They are sold complete with short sharp needles. It is important to understand what a 1 ml insulin syringe means and how to calculate the dosage. Diabetic patients are forced to inject themselves. They must be able to determine how much hormone to administer based on the situation.

Composition of drugs

To calculate insulin in a syringe, you need to know what solution is used. Previously, manufacturers made medications containing 40 units of the hormone. On their packaging you can find the U-40 marking. Now we have learned to make more concentrated insulin-containing liquids, which contain 100 units of the hormone per 1 ml. Such containers with solution are marked U-100.

In each U-100, the dose of the hormone will be 2.5 times higher than in U-40.

To understand how many ml are in an insulin syringe, you need to evaluate the marks on it. For injections, different devices are used, they also have U-40 or U-100 signs. The following formulas are used in the calculations.

  1. U-40: 1 ml contains 40 units of insulin, which means 0.025 ml - 1 U.
  2. U-100: 1 ml - 100 IU, it turns out, 0.1 ml - 10 IU, 0.2 ml - 20 IU.

It is convenient to distinguish instruments by the color of the cap on the needles: for a smaller volume it is red (U-40), for a larger volume it is orange.

The dosage of the hormone is selected by the doctor individually, taking into account the patient’s condition. But it is extremely important to use the necessary injection agent. If you draw a solution containing 40 units per milliliter into a U-100 syringe, using its scale as a guide, it will turn out that the diabetic will inject 2.5 times less insulin into the body than planned.

Markup features

You need to figure out how much of the drug is required. Injection devices with a capacity of 0.3 ml are available for sale, the most common being 1 ml. This precise size range is designed to ensure that people can inject a strictly defined amount of insulin.

The volume of the injector should be based on how many ml are indicated by one marking division. First, the total capacity should be divided by the number of large pointers. This will give you the volume of each of them. After this, you can count how many small divisions are in one large one, and calculate using a similar algorithm.

It is not the applied stripes that need to be taken into account, but the spaces between them!

Some models indicate the value of each division. A U-100 syringe can have 100 marks, broken up by a dozen large ones. They are convenient for calculating the required dosage. To administer 10 units, it is enough to draw the solution up to the number 10 on the syringe, which will correspond to 0.1 ml.

U-40s typically have a scale from 0 to 40, with each division representing 1 unit of insulin. To administer 10 units, you should also dial up the solution to the number 10. But here it will be 0.25 ml instead of 0.1.

The amount should be calculated separately if the so-called “insulin” is used. This is a syringe that holds not 1 cube of solution, but 2 ml.

Calculation for other markings

Usually, diabetics do not have time to go to pharmacies and carefully select the necessary equipment for injections. Missing the deadline for administering the hormone can cause a sharp deterioration in well-being; in particularly difficult cases, there is a risk of falling into a coma. If a diabetic has a syringe on hand intended for administering a solution with a different concentration, he has to quickly recalculate.

If a patient requires a one-time injection of 20 units of a drug labeled U-40, and only U-100 syringes are available, then you should draw not 0.5 ml of solution, but 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate by it! You need to choose the same 20 units.

How else are insulin syringes used?

ASD fraction 2 - this remedy is well known to most diabetics. It is a biogenic stimulant that actively affects all metabolic processes occurring in the body. The drug is available in drops and is prescribed to non-insulin-dependent diabetics with type 2 disease.

ASD fraction 2 helps reduce the concentration of sugar in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then a syringe if we are not talking about injections? The fact is that the liquid should not come into contact with air, otherwise oxidation will occur. To prevent this from happening, and also for accuracy of administration, syringes are used for the set.

Let's calculate how many drops of ASD fraction 2 are in the “insulin”: 1 division corresponds to 3 particles of liquid. This amount is usually prescribed when starting the drug and then gradually increased.

Features of various models

There are insulin syringes on sale that are equipped with removable needles and are of one-piece construction.

If the tip is soldered to the body, the medicine will be completely removed. With fixed needles, there is no so-called “dead zone” where part of the drug is lost. It is more difficult to achieve complete removal of the medication if the needle is removed. The difference between the amount of hormone collected and injected can reach up to 7 units. Therefore, doctors advise diabetics to purchase syringes with non-removable needles.

Many people use the injection device several times. This is prohibited. But if there is no choice, then the needles must be disinfected. This measure is extremely undesirable and is only permissible if the syringe is used by the same patient and it is impossible to use another one.

The needles on the “insulin”, regardless of the number of cubes in them, are shortened. The size is 8 or 12.7 mm. The release of smaller versions is impractical, since some insulin bottles are equipped with thick stoppers: the medicine may simply not be removed.

The thickness of the needles is determined by special markings: a number is indicated next to the letter G. You should focus on it when choosing. The thinner the needle, the less painful the injection will be. Given that insulin is administered several times daily, this is important.

What to pay attention to when performing injections

Each vial of insulin can be used multiple times. The remaining amount in the ampoule should be stored strictly in the refrigerator. Before administration, the drug is warmed to room temperature. To do this, remove the container from the cold and let it stand for about half an hour.

If you have to use a syringe multiple times, it must be sterilized after each injection to prevent infection.

If the needle is removable, then different models should be used to collect the medicine and administer it. Large ones are more convenient for taking insulin, while small and thin ones are better for injections.

If you need to measure 400 units of the hormone, you can take it into 10 syringes marked U-40 or 4 syringes labeled U-100.

When choosing a suitable injection device, you should focus on:

  • The presence of an indelible scale on the case;
  • Small step between divisions;
  • Needle sharpness;
  • Hypoallergenic materials.

You should take a little more insulin (1-2 units), since some amount may remain in the syringe itself. The hormone is taken subcutaneously: for this purpose, the needle is inserted at an angle of 75 0 or 45 0. This level of tilt allows you to avoid hitting the muscle.

When diagnosing insulin-dependent diabetes, the endocrinologist must explain to the patient how and when the hormone should be administered. If children become patients, the entire procedure is explained to their parents. For a child, it is especially important to correctly calculate the dose of the hormone and understand the rules for its administration, since a small amount of the drug is required, and an excess of it should not be allowed.

One cube in a syringe means one ml. medicinal solution. One ml. water, weighs one gram. This means that in one cube or milliliter of water there will be 1000 mg of the weight of this water. The number of mg of the drug in the ampoule is determined by the percentage. For example, we have one ampoule of 1% diphenhydramine with a volume of one ml. In dry form, the amount of diphenhydramine is in 1 ml, its 1% solution will be 0.01 g. That is, 10 mg.

A cube is the colloquial name for a cubic centimeter, and if we talk about a syringe cube, it means 1 milliliter (a milliliter is equal to a cubic centimeter).

Thus, 1 cube of a syringe will always equal 1 ml of liquid or drug solution.

There are syringes of different capacities - 1 ml, 2 ml, 5 ml, 10 ml, etc.

Based on the above:

A 1ml syringe is the same as a 1cc syringe.

A 5ml syringe is the same as a 5cc syringe.

A 10ml syringe is the same as a 10cc syringe.

As for the number of mg (milligrams) in a syringe cube, this value will depend on what kind of liquid or medicine is in it.

For example, if you take water, then 1 ml of water = 1 gram of water = 1000 mg of water. That is, 1 cube of a syringe is 1000 mg of water.

In the case of medications, the amount of mg in 1 ml and in 1 cube of a syringe will depend on how much active substance is in 1 ml of solution.

This information is usually indicated on the annotations for the medicine.

The drug Gentamicin. On the packaging you can see the following information:

"Solution for intravenous and intramuscular administration 40 mg/ml."

"Solution for intravenous and intramuscular administration 80 mg / 2 ml."

This means that in 1 milliliter there will be 40 mg of the active substance (gentamicin sulfate).

If the single dosage is 100 mg, then for injection you need to draw 100 / 40 = 2.5 milliliters or 2.5 syringe cubes.

1 cube is the colloquial name for one cubic centimeter, i.e. this is a unit of volume, and therefore for liquids or bulk substances this unit will always be the same, no matter what it is: water, sour cream or sand, there will always be the same volume in the same container. A milliliter is also a unit of volume and is equal to exactly one cubic centimeter. In other words, 1 cube = 1 cubic centimeter = 1 ml. But the weight will depend on the density of the substances; the higher it is, the greater the weight will be in one unit of volume. For example, 1 ml of water is equal to 1 gram, but sunflower oil has a higher density than water and therefore the weight of 1 ml of oil will be more than 1 gram, therefore 1 cube is equal to 1 ml, but the number of milligrams will depend on the density of the substance that is being measured .

Cube is a kind of slang that is used in medicine. In fact, there is no such official measure of volume or mass. A cube is one milliliter of a certain solution. That is, when they say that you need to inject a cube of drugs, they talk about one milliliter.

Accordingly, when purchasing the syringes themselves, they ask how many cubes this manipulation tool is needed for.

As for the mass, nothing can be said for sure; this parameter will change. Still, solutions have different densities, which means that with the same volume they will have different masses. And we rarely see exactly the mass of the injected drug. Even if we are talking about powder, we still use a solvent.

A cube is a colloquial term for one milliliter. That is, 1 cube is 1 milliliter of medicine in liquid form in a syringe.

It is more difficult to convert the number of milligrams into a cube - it depends on the medicine. Usually the annotation indicates how many active substances and auxiliary components in grams are contained in one milliliter of the medicine.

While in the department (regardless of which one - therapeutic, surgical, cardiology, intensive care), one way or another you have to deal with injections.

Procedure nurses and other nurses most often use this word - cube (2 cubes, 5, 10 cubes, etc.).

A medical “cube” is a milliliter:

1 cube is 1 ml;

2 cubes is 2 ml;

5 cubes is 5 ml.

For example, to make a cube of analgin - inject 1 ml of analgin.

As for mg, it (the amount of substance) is determined by the percentage of the substance in the ampoule/vial.

How many grams is 1 cube in a syringe?

The volume of the syringe and the medicine in nm is measured not in grams, but in milliliters, so it is impossible to give an exact answer, since all medicines have different mass and density. One cube contains one milliliter, and the number of grams of medicine can be found in the annotation.

One cube is the colloquial term for one milliliter or one large division on a syringe. One milliliter of water weighs approximately one gram. That is, one syringe cube contains one gram of water. Medical preparations based on an aqueous solution will weigh approximately this much, since the content of denser active substances in them is several times less and has practically no effect on the weight of the cube. Even if an alcohol solution is indicated on the package, you should remember that this is a very low percentage alcohol solution and there is still more water in it. So count one cube as one gram and you won't be much mistaken.

You can find out how many grams of active substance are contained in one cube (in 1 milliliter) on the medicine packaging. In front of me now is a package of diclofenac, 1 cube contains 25 mg of active ingredient. Each drug has a different dosage.

1 cube in a syringe is 1 milliliter, and how many grams of the active substance is written on the injection box.

One cubic centimeter is called a cube of medicine, but the cube holds different numbers of grams. Medicines administered through injection have different ratios of grams to milliliters. To do this, you need to look at the instructions or packaging; the recommended number of milligrams is indicated there, and the definition of a cube is used by experienced doctors and nurses.

A cube is a measure of volume equal to one cubic centimeter. A gram is a measure of mass. There are approximately 250 milligrams in one milliliter. And in order to calculate accurately, you need to read the information about the density on the packaging and perform simple arithmetic operations.

Everything will depend on the density of the liquid itself. Still, the chemical composition of each medicine is different, the concentration of the various components is not equal, so it is impossible to say exactly how many grams are in one cube.

Those. in order to find out the amount of the substance in grams, you must refer to the instructions for the medicine/injection liquid. Plus, usually manufacturers indicate the active active ingredient separately in grams (i.e., the main one), and separately the auxiliary components, also in grams.

See the photo above as an example. The data is not written down here, as in injections, but the active substance and auxiliary substances are clearly visible in the photo.

If we talk about water, then in one cube there will be 1 ml - volume and 1 mg - weight. But for other liquids, the mass in mg may vary, since it also depends on the density of the substance. But this information must be on the medicine packaging.

When they say one cube, they mean one cubic milliliter. If we take one cube of water as an example, its weight will be 1 gram. For medicines, the weight of the cube will depend on their composition. Usually the packaging indicates how much all the components included in a cubic millimeter of medicinal solution weigh.

1 cube in a syringe how many ml

how much is in 1 syringe cube ml

In the Other education section, the question is 1 cube cm of syringe - how many ml? asked by the author Sanya Sanya the best answer is cm"3 and ml are different names for the same volume. milli 1\\1000 liter = 1000 cm"3 so think about it. There are different types of teaspoons.

1=1 there! You don't equal now! There is still sweating and many other things! Generally in kb. ml 1 ml goes!

koli4estvo 4ainih lozek umnozit na 5)

1 cm3 = 1 ml = 30 drops (how do you pour 5 ml into a teaspoon? - Look at the syringe at 5 ml (cm3) what is its volume)

How many milliliters are in an insulin syringe?

The most accessible method of administering insulin to hormone-dependent diabetics is the use of special syringes. They are sold complete with short sharp needles. It is important to understand what a 1 ml insulin syringe means and how to calculate the dosage. Diabetic patients are forced to inject themselves. They must be able to determine how much hormone to administer based on the situation.

Composition of drugs

To calculate insulin in a syringe, you need to know what solution is used. Previously, manufacturers made medications containing 40 units of the hormone. On their packaging you can find the U-40 marking. Now we have learned to make more concentrated insulin-containing liquids, which contain 100 units of the hormone per 1 ml. Such containers with solution are marked U-100.

In each U-100, the dose of the hormone will be 2.5 times higher than in U-40.

To understand how many ml are in an insulin syringe, you need to evaluate the marks on it. For injections, different devices are used, they also have U-40 or U-100 signs. The following formulas are used in the calculations.

  1. U-40: 1 ml contains 40 units of insulin, which means 0.025 ml - 1 U.
  2. U-100: 1 ml - 100 IU, it turns out, 0.1 ml - 10 IU, 0.2 ml - 20 IU.

It is convenient to distinguish instruments by the color of the cap on the needles: for a smaller volume it is red (U-40), for a larger volume it is orange.

The dosage of the hormone is selected by the doctor individually, taking into account the patient’s condition. But it is extremely important to use the necessary injection agent. If you draw a solution containing 40 units per milliliter into a U-100 syringe, using its scale as a guide, it will turn out that the diabetic will inject 2.5 times less insulin into the body than planned.

Markup features

You need to figure out how much of the drug is required. Injection devices with a capacity of 0.3 ml are available for sale, the most common being 1 ml. This precise size range is designed to ensure that people can inject a strictly defined amount of insulin.

The volume of the injector should be based on how many ml are indicated by one marking division. First, the total capacity should be divided by the number of large pointers. This will give you the volume of each of them. After this, you can count how many small divisions are in one large one, and calculate using a similar algorithm.

It is not the applied stripes that need to be taken into account, but the spaces between them!

Some models indicate the value of each division. A U-100 syringe can have 100 marks, broken up by a dozen large ones. They are convenient for calculating the required dosage. To administer 10 units, it is enough to draw the solution up to the number 10 on the syringe, which will correspond to 0.1 ml.

The amount should be calculated separately if the so-called “insulin” is used. This is a syringe that holds not 1 cube of solution, but 2 ml.

Calculation for other markings

Usually, diabetics do not have time to go to pharmacies and carefully select the necessary equipment for injections. Missing the deadline for administering the hormone can cause a sharp deterioration in well-being; in particularly difficult cases, there is a risk of falling into a coma. If a diabetic has a syringe on hand intended for administering a solution with a different concentration, he has to quickly recalculate.

If a patient requires a one-time injection of 20 units of a drug labeled U-40, and only U-100 syringes are available, then you should draw not 0.5 ml of solution, but 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate by it! You need to choose the same 20 units.

How else are insulin syringes used?

ASD fraction 2 - this remedy is well known to most diabetics. It is a biogenic stimulant that actively affects all metabolic processes occurring in the body. The drug is available in drops and is prescribed to non-insulin-dependent diabetics with type 2 disease.

ASD fraction 2 helps reduce the concentration of sugar in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then a syringe if we are not talking about injections? The fact is that the liquid should not come into contact with air, otherwise oxidation will occur. To prevent this from happening, and also for accuracy of administration, syringes are used for the set.

Let's calculate how many drops of ASD fraction 2 are in the “insulin”: 1 division corresponds to 3 particles of liquid. This amount is usually prescribed when starting the drug and then gradually increased.

Features of various models

There are insulin syringes on sale that are equipped with removable needles and are of one-piece construction.

If the tip is soldered to the body, the medicine will be completely removed. With fixed needles, there is no so-called “dead zone” where part of the drug is lost. It is more difficult to achieve complete removal of the medication if the needle is removed. The difference between the amount of hormone collected and injected can reach up to 7 units. Therefore, doctors advise diabetics to purchase syringes with non-removable needles.

Many people use the injection device several times. This is prohibited. But if there is no choice, then the needles must be disinfected. This measure is extremely undesirable and is only permissible if the syringe is used by the same patient and it is impossible to use another one.

The needles on the “insulin”, regardless of the number of cubes in them, are shortened. The size is 8 or 12.7 mm. The release of smaller versions is impractical, since some insulin bottles are equipped with thick stoppers: the medicine may simply not be removed.

The thickness of the needles is determined by special markings: a number is indicated next to the letter G. You should focus on it when choosing. The thinner the needle, the less painful the injection will be. Given that insulin is administered several times daily, this is important.

What to pay attention to when performing injections

Each vial of insulin can be used multiple times. The remaining amount in the ampoule should be stored strictly in the refrigerator. Before administration, the drug is warmed to room temperature. To do this, remove the container from the cold and let it stand for about half an hour.

If you have to use a syringe multiple times, it must be sterilized after each injection to prevent infection.

If the needle is removable, then different models should be used to collect the medicine and administer it. Large ones are more convenient for taking insulin, while small and thin ones are better for injections.

If you need to measure 400 units of the hormone, you can take it into 10 syringes marked U-40 or 4 syringes labeled U-100.

When choosing a suitable injection device, you should focus on:

  • The presence of an indelible scale on the case;
  • Small step between divisions;
  • Needle sharpness;
  • Hypoallergenic materials.

You should take a little more insulin (1-2 units), since some amount may remain in the syringe itself. The hormone is taken subcutaneously: for this purpose, the needle is inserted at an angle of 75 0 or 45 0. This level of tilt allows you to avoid hitting the muscle.

When diagnosing insulin-dependent diabetes, the endocrinologist must explain to the patient how and when the hormone should be administered. If children become patients, the entire procedure is explained to their parents. For a child, it is especially important to correctly calculate the dose of the hormone and understand the rules for its administration, since a small amount of the drug is required, and an excess of it should not be allowed.

How many ml in a syringe cube

Sumamed was prescribed, but I can’t figure out how much to give it, there is a suspension of 100 mg/5 ml dosage for children: at the rate of 10 mg/kg body weight once a day, the child weighs 22 kg (5.5 years old), how many milliliters should I give the child? The set includes a measuring syringe up to 5 milliliters. I can't think straight :(. The topic has been moved to another conference, it is recommended to discuss it there! When writing a new topic, please stick to the topic of the conference.

Dilution of medicine for injection. Medicine and health

It’s easier to buy a 2.0 ml syringe; by shading you will definitely get 2.0 ml

Dilution of medicine for injection. Pediatric medicine

The child was prescribed injections of Cortexin 10 mg, it is in the form of a powder in a bottle, just as much as we need, and the medicine needs to be diluted with novocaine so that it does not hurt. novocaine - it is written on the package injection solution 5 mg/ml/10 ampoules of 5 ml/, The doctor prescribed novocaine 0.5% -2.0, i.e. for dilution, do I need to take a little less than half an ampoule of novocaine? Or am I wrong?

Can you take a break from the big stuff and help me with a small everyday problem? :-)) For example, I need to give my little boy 20 drops of syrup 20 minutes before meals. And he consumes all his food in the garden. So how can I technically give him these 20 drops right in front of the garden gate? Should I just drop it onto a spoon or are there other methods that are still unknown to me? 🙂

Urgently. Pediatric medicine

what is “draw 8 units into an insulin syringe” (we are treating an animal)

what is written on the stripes?

How to drink bacteriophage? Child from 1 to 3

Girls, please give me some advice!! We were diagnosed with Staphylococcus aureus. You need to drink bacteriophage. But the problem is that the last time we drank it was in infancy from a syringe, and now we are 3 years old and under no circumstances does our daughter want to drink it (it tastes bad and smells disgusting). I stuffed half a spoon into it, and it vomited :-(. No matter what I diluted it, the smell remained. Tell me how to take the medicine. It’s very necessary.

Who gave the injections to the child, a question for you. Child from 1 to 3

Please advise. My daughter is 1 year and 3 months old. They prescribed intramuscular injections, 1.2 cc of medicine (I use a 2 ml syringe). Do I need to attach another needle for intramuscular injections or can I inject with the one that comes with the 2 ml syringe? It is 7 mm long less than the “intramuscular” one from a 5 ml syringe, but my mother says that IM needles should be used even for infants to avoid bumps (a pediatrician told her so at one time). The needle from a 2 ml syringe is thinner and about 3.5 mm long. It's easier for me.

Tell me about peptides, please. SP: get-togethers

Please tell me who is in the know))) How to mix them. There is a set for expression wrinkles and a moisturizer. I sit with them like a monkey with glasses. Do you pour all the contents of the ing into the base or do you need to measure something with syringes? I couldn't find a leaflet with instructions. Heelp!! PS. The peptides were collected here, if anything)))

Consider, as an example, a recipe for a serum against expression lines:

Matrixyl Synthe’6 2%

Since we are only adding 6% of the actives, we don't need a thickener or preservative.

We take a standard package of 50g or 20g and calculate the % input for each component

To find out the weight of assets for input, we must multiply 50g/20g by the required % of the asset

If you have a 20g package, then 0.2x4=0.8g

For Matrisil: 0.5x2=1g (for 50g), 0.2x2=0.4g (for 20g)

You can measure all the components with a regular syringe from the pharmacy (they are sterile), after removing the needle. It is better to take a separate syringe for each component.

This cream can be stored in the refrigerator for 6 months. Without the risk of losing its properties, rancidity or violation of microbiological standards.

cedex. Child from 1 to 3

They prescribed Cedex for otitis media, 2 ml. Everything there is in mg. It’s a suspension. Question: 1 mg = 1 ml or not?

Please help me, how much to “hang in grams” is the medicine..

Sumamed was prescribed, but I can’t figure out how much to give it, there is a suspension of 100 mg/5 ml dosage for children: at the rate of 10 mg/kg body weight once a day, the child weighs 22 kg (5.5 years old), how many milliliters should I give the child? The set includes a measuring syringe up to 5 milliliters. I can't think straight :(.

Probably like this: 10mg*22=220mg, i.e. 11ml.

It turns out, 2 measuring syringes and another 1 ml.

How to give medicine to a child: 5 rules. Health of a child up to one year

Children's medications are also often produced in the form of rectal suppositories, and in order to administer them, you will need some skill, but this procedure is not at all difficult for moms and dads. What, how much and how often Before giving your child medicine, carefully read the instructions for its use. Read what the drug should look like, its consistency, and be sure to check the expiration date of the drug. Pay attention to the storage conditions of the drug: some medications must be stored at a certain temperature, without access to light, or even in the refrigerator. Ask your doctor in detail in advance about the dosage and how much.

You cannot independently reduce or increase the dosage of the drug or complete the course of treatment earlier than recommended by the doctor. We measure correctly Never give medicine by eye. If a special measuring spoon or dispenser is attached to the drug (usually it comes in the form of a graduated syringe), it is better to measure the medicine with them rather than with ordinary cutlery (a teaspoon or dessert spoon). This is more convenient (it’s easier to take the medicine from a bottle with a dispenser), and there is no risk of making a mistake with the dosage. Use the measuring device that comes with this medicine: you should not take a dispenser from another medicine, even if outwardly it seems to you that it does not mean anything.

Questions about EPI for Ukrainian women and not only. Other children

There are a lot of questions, little time, so I’m throwing everything into one topic. Manyunya and I are now in the hospital. We ended up with a series of severe attacks, were supposed to be discharged on Thursday, and then it hit us: (In general, it’s just terrible. We drink 3 cubes of Depakine syrup (I measure it with a syringe) and now we’ve added Lamictal, one-eighth, twice a day. Increase the dose And the little one is getting worse: (Yesterday our doctor talked to me. They suspect that we don’t just have epilepsy, but that it’s caused by a genetic disorder, c.

Our non-geneticists have also seen all sorts of genets. signs - whatever we didn’t suspect, and “happy doll syndrome” because of the beautiful face and long eyelashes, and our sky is really gothic :)))

But neither the kareotype nor the amino acid analysis showed anything :))

How to pour perfume? SP: get-togethers

Girls, I remember purchasing molds from us. How did you bottle them? I really need to share the perfume))) and where can I buy empty bottles? Thank you

For me, unscrewing turns out to be final - I have to pour everything out

Survey about CORTEXIN. Other children

I searched and searched, read something, but I still want to make it a separate topic. Girls, who injected their children with CORTEXIN? It is advisable to write point by point :) The questions are: 1. Dosage and frequency. How many days is the course, every other day or every day? 2. What did they breed with? Novocaine or saline solution? 3. How did the children tolerate the injection itself? Is he sick? 4. Diagnosis of the child. 5. Results (positive) after the course, if any, what were they? 6. Side effects, deterioration - if yes, what?

Please help me calculate the dosage of the medicine. Pets

for my dog, 3 kg. You need to add cocarboxylase to the dropper at a dosage of 0.02. It is sold in a dosage of 50 mg. Neither the doctor nor the pharmacists at the pharmacy could really tell me how to get 0.02 as a result. The package contains ampoules with 50 mg cocarboxylase powder and 2 mg ampoules with water for injection. I asked at the pharmacy if I should take 5 ml spirtz. no, you need 2 ml. I read the instructions - it says dilute in a 5 ml syringe. but that's okay, let's buy it. how to measure 0.02? For some reason they told me that.

5 milligrams - how much? Child from 1 to 3

Girls, who knows, 5 milligrams is how much - a teaspoon or less? Otherwise, the doctor prescribed us a medicine, and it says - give a single dose - 5 milligrams.

How much pyrantel for prevention? Pediatric medicine

I bought pyrantel suspension for my child. I didn't understand anything from the instructions. ASCARIDOSIS AND ENTEROBIOSIS. MIXED INVASIONS - once at a dose of 10 mg per kg. Next is the table (I remove the unnecessary, the child is 3 years old) age dose of the drug number of 2 years - 6 years 250 mg 1 measure = 5 ml ANKYLOSTOMIASIS: prescribed at a dose of 10 mg per kg for three days NEKATOROSIS: for severe forms, prescribed at a dose based on 20 mg per kg for three weeks. I don’t understand how to give it to a child for prevention (it seems to me that...

It must be given once. All family members should drink Pirantel at the same time. For adults, the dose is also determined to be 10 mg per kg, or if an adult weighs up to 75 kg, 15 ml of Pirantel is needed, i.e. 3 measurements.

Clean your home. Change your underwear.

To relieve itching, wash your child and apply at least some baby cream. If you suspect that your child has pinworms, then this is not prevention, but treatment. If there are no worms, then the drug does not work on missing worms, i.e. it will not prevent the appearance of worms.

I simply explained the doses to you, this is not advice to take or not take the drug - it should be your decision.

Supplementary feeding: in what cases is it worth additionally feeding the child?

After some time, he may become ravenous and eat much more. The baby's stomach is used to a small volume of milk, so it will take several days before it can accommodate more food. Slow bottle feeding gives your baby the opportunity to stop eating when he's full. Within a week, you will understand how much supplemental feeding your baby needs at different times of the day. Offer supplementary feeding first, then breastfeeding. Some babies breastfeed better on a full stomach. If the baby has not gained weight well, he needs not only to grow, but also to catch up. Accelerated growth requires more food, so it is not surprising that the baby eats so much at first. Rapid growth at this time will be noticeable along a steeper curve.

Devices for supplementary feeding of an infant Supplementary feeding method Pros Cons Comments Spoon An easy and quick way for a small amount of supplementary feeding. Labor-intensive and inconvenient for large amounts of supplementary feeding. A good way to supplement with colostrum. Pipette, disposable syringe or periodontal syringe with a curved end (convenient to use for breastfeeding) An easy and quick way for a small amount of supplementation. Labor-intensive for a large volume of supplementary feeding. Place your baby on your lap so that his head is elevated. Place your feet on a coffee table, etc. During supplementary feeding, let your baby suck his thumb. Make sure that the tip of the syringe or pipette does not touch the baby's palate or cheek. Not much.

Sperm: the struggle for quality. Analyzes and examinations before.

Quantity and quality The first thing that is determined in the laboratory is the liquefaction time of the ejaculate. At first, the sperm is absolutely liquid, then it quickly thickens, and after some time, under the influence of prostate enzymes, it becomes liquid again. The correctness of the transformations can be judged by the change in viscosity. To do this, the ejaculate is drawn into a syringe and released through a special needle. Viscosity is measured by the length of the “thread” that follows the released drop. Sperm is considered liquefied if the “thread” does not exceed 2 cm. Normally, this occurs within 10–40 minutes. If the process is delayed, then? there are problems with the prostate gland. After liquefaction using indicator paper, the semen is tested for acidity. WHO recommend.

How many 30 drops are in milliliters? About yours, about your girl’s

At my request, my husband bought Morozov drops (those that help fall asleep) in the production department of the pharmacy, so these goats (I can’t call them otherwise) are now packaged in ordinary bottles that do not allow dripping through the lid. Just measure out 30 drops the way you want:((If only they had warned him, he would have taken a pipette. There is an idea to mark with a syringe, but I can’t find the volume of the drop.

Young mother, or the first days in the maternity hospital. Adjusting the chest.

They determined the norm at 40 g for each feeding and told her to wake up and feed Anya every 2 hours, counting from the start of feeding. A bottle was urgently purchased and I started pumping. But now, because colostrum began to be replaced by milk and my breasts were full for the 4th day, I began to experience stagnation. I couldn’t squeeze more out of my bust, which was swollen like two pillows, no matter how much I crushed it. Even the maternity hospital electric breast pump, which hummed at full power, but only squeezed out a couple of drops, did not help. By that time, the mechanical one that had been given to me was already at home, and there was no way to pick it up. If I couldn’t get milk, then what was it like for my weakened daughter to do it! One of the weighings, for example, display.

Well done you for fighting. The husband is gold. I wish you all more joy.

I'm a mom in a cube! Multiple pregnancy

Mom in a cube: the real story of an ordinary woman who successfully carried and gave birth to triplets, while maintaining an excellent sense of humor.

And now - one is yelling, the second is sleeping, the third has crap himself. Who should I run to, what should I do? I'm in the hospital. I’m lying alone in the ward with three others. Thanks to the maternity hospital, I at least learned to swaddle there. The seam hurts, my head is spinning, but I have to wash the floors not only in my room, but also in the common kitchen, run with three to the treatment rooms and to the doctors’ offices, which are located on different floors, hand over and receive diapers, keep a diary, when, who and how much he ate and peed, collect urine, carry the babies every day for control weighing and weigh them herself after each feeding. I don't have a second to sleep. At night the worst thing begins. The kids have a tummy ache and they howl in unison. “This will pass by three months. Or maybe we won’t make it to three,” the nurse on duty says distantly and slowly leaves. I'm going crazy. Last

Artificial feeding. Artificial feeding

How to correctly calculate the required volume of the mixture? When artificial feeding, it is important to determine the required amount of nutrition for the child. The daily amount of food depending on the age of the baby is shown in table 1. For example, if the baby is 1 month old and weighs 3500 g, then the daily amount of food is 1/5 of body weight, i.e. 700 ml. To determine how much formula you need per feeding, divide the daily amount of food by the number of feedings. Approximate number of feedings during the day: first week of life - 7-10; 1 week - 2 months - 7-8; 2-4 months - 6-7; 4-9 months - 5-6; 9-12 months - 4-5. It should be noted that if during breastfeeding.

Parent handicrafts. Part 2. Caring for a child up to one year old

How to care for and treat a baby at home.

Moreover, if the drops are placed in a sterile bottle, then we have the opportunity not to break its seal: we wipe the rubber stopper with alcohol, pierce it with a needle and draw it into a syringe. Remove the needle from the bottle and disconnect it from the syringe. As a result, we have a container with a sterile solution. A container that does not spill or break, which is convenient to heat and convenient to use. Nose In order for the medicine to have an effect, it is a good idea to clean the nose first, if, of course, there is an accumulation of mucus in the nasal passages. Children of conscious age

Neither more nor less. How much amniotic fluid is needed?

Oligohydramnios and polyhydramnios during pregnancy. Possible complications, features of childbirth

The increase in volume occurs unevenly. In the first trimester, at 10 weeks of pregnancy, the amount of amniotic fluid averages 30 ml, per week - about 100 ml, at 18 weeks, etc. The maximum volume is observed in the second week of pregnancy, averaging ml. By the end of pregnancy, the amount of water may decrease to 800 ml as a result of increased fluid excretion from the woman’s body. Amniotic fluid performs a number of important functions. They create conditions for the free movement of the fetus, protect its body from adverse external influences, and protect the umbilical cord from compression between the fetal body and the walls of the uterus. Thus, the volume of amniotic fluid is a kind of indicator of the normal course of pregnancy. What.

Not enough milk? It's worth looking into! Part 1. Establishing breastfeeding.

The use of breast substitutes: pacifiers or bottles with a nipple. A simple rule works here: “sucking the nipple - minus feeding (minus breast stimulation for sufficient lactation and minus a certain amount of milk for the baby).” Supplementing the baby with water and/or other liquids. It is obvious that no matter how much the baby drank, he did not eat the same amount of mother’s milk. Water fills a tiny stomach and gives a false feeling of fullness. It is known that plain water (not the kind found in mother's milk) is not absorbed by the child, i.e. has nothing to do with the prevention or treatment of dehydration, but only passes through the baby’s gastrointestinal tract, washing away the flora that breast milk “helps populate.”

Just what the doctor ordered. We give medicine to the baby.

It is unacceptable to use drugs that have expired, were stored incorrectly, have signs of spoilage, or have erased or illegible inscriptions. Rule three: follow the dose, time, method of administration, frequency and duration of use of the medicine prescribed by your doctor. Before the doctor leaves, check whether you understood the dosage regimen correctly: how much, how, when (before, during or after meals), how often and for how long the child should take the medicine. Never give medicine “by eye” - measure the prescribed dose using a special measuring spoon, graduated pipette, measuring tube or syringe without a needle; Before giving medicine to your child, check that you have measured the dose accurately. Use only clean measuring cups. Taking medications should be regulated.

If there is such a need, then divide the tablet very precisely with a sharp knife. For a more accurate dosage, you can use a disposable syringe without a needle. For example, a child needs to be given 1/8 of a tablet: draw exactly 8 ml of boiled water into a syringe, release it into a cup, then crush the whole tablet and dissolve it there, then draw only 1 ml of solution into the syringe from a cup and let the baby drink. The solution prepared from crushed tablets can only be used immediately after its preparation - it cannot be stored and is used once; For the next dose of the drug, the solution is prepared again.

Kogitum - can open ampoules be stored? Other children

Cogitum was prescribed, 1/4 ampoule 2 times a day. Considering the price of the drug, I would like to use the ampoule for at least a day, or even better, for two. Can it be stored open, has anyone checked? Thank you

Mom is giving injections - I need help. We need your experience and knowledge.

Who has experience in this matter? I need your help, otherwise my brain is about to boil :) We prescribed a course of treatment for the child, prescribed a bunch of medications, incl. you need to give injections: 1. Cerebrolysin 1.0 ml intramuscularly 2. Actovegin 2.0 ml intramuscularly 3. Neuromidin 5 mg 0.5 ml intramuscularly The injections will have to be given to the mother, i.e. to myself. I’m terribly afraid, and I’ve never given injections myself in my life. I only have experience in diluting Cortexin injections and, accordingly, I saw where to inject and how to administer. Those. With.

Please convert drops to ml. SP: get-togethers

You need to give the child 10 drops of medicine, but there is no pipette:-(there is a syringe. If you are not too lazy, please measure how many ml to give.

The child refused the breast. Part I. Weaning

Over time, with regular feeding, the nipple takes on a normal appearance. If that doesn't work, feed with feeding pads. You can try to pull out the nipple. True, it was better to start doing this before giving birth. Make a simple mechanism: remove the piston from a 5 ml disposable syringe, use a knife to cut off the part of the syringe where the needle is inserted to make a tube. Insert the piston into the cut end. Place the free end (where the finger rests) on the nipple and pull the plunger so that the nipple is pulled into the syringe. Leave it for a while. With regular exercise, the nipple will stretch. Different breasts Reason. It is easy to suck on one breast, but difficult on the other for some reason.

©, 7ya.ru, Certificate of registration of mass media El No. FS.

Reprinting messages from conferences is prohibited without indicating a link to the site and the authors of the messages themselves. Reproduction of materials from other sections of the site is prohibited without the written consent of ALP-Media and the authors. The opinion of the editors may not coincide with the opinion of the authors. The rights of authors and the publisher are protected. Technical support and IT outsourcing are provided by KT-ALP.

7ya.ru - information project on family issues: pregnancy and childbirth, raising children, education and career, home economics, recreation, beauty and health, family relationships. The site hosts thematic conferences, blogs, ratings of kindergartens and schools, articles are published daily and competitions are held.

If you find errors, problems, or inaccuracies on the page, please let us know. Thank you!

if you need 5 ml then take a 5 cc syringe.

A teaspoon is 5 ml, and a two-cc syringe is 2 ml - according to the marks, but if you fill it all the way, it will be a little more - about 2.5 ml, maybe a little more.

How many ml are in 1 syringe cube? How many mg are in 1 syringe cube?

1 cube in a syringe is how many ml (milliliters)?

1 cube in a syringe is how many mg (milligrams)?

Syringe cubes, slang name for its capacity in ml. One cube in a syringe means one ml. medicinal solution. One ml. water, weighs one gram. This means that in one cube or milliliter of water there will be 1000 mg of the weight of this water. The number of mg of the drug in the ampoule is determined by the percentage. For example, we have one ampoule of 1% diphenhydramine with a volume of one ml. In dry form, the amount of diphenhydramine is in 1 ml, its 1% solution will be 0.01 g. That is, 10 mg.

A cube is the colloquial name for a cubic centimeter, and if we talk about a syringe cube, it means 1 milliliter (a milliliter is equal to a cubic centimeter).

Thus, 1 cube of a syringe will always equal 1 ml of liquid or drug solution.

There are syringes of different capacities - 1 ml, 2 ml, 5 ml, 10 ml, etc.

Based on the above:

A 1ml syringe is the same as a 1cc syringe.

A 5ml syringe is the same as a 5cc syringe.

A 10ml syringe is the same as a 10cc syringe.

As for the number of mg (milligrams) in a syringe cube, this value will depend on what kind of liquid or medicine is in it.

For example, if you take water, then 1 ml of water = 1 gram of water = 1000 mg of water. That is, 1 cube of a syringe is 1000 mg of water.

In the case of medications, the amount of mg in 1 ml and in 1 cube of a syringe will depend on how much active substance is in 1 ml of solution.

This information is usually indicated on the annotations for the medicine.

The drug Gentamicin. On the packaging you can see the following information:

"Solution for intravenous and intramuscular administration 40 mg/ml."

"Solution for intravenous and intramuscular administration 80 mg / 2 ml."

This means that in 1 milliliter there will be 40 mg of the active substance (gentamicin sulfate).

If the single dosage is 100 mg, then for injection you need to draw 100 / 40 = 2.5 milliliters or 2.5 syringe cubes.

1 cube is the colloquial name for one cubic centimeter, i.e. this is a unit of volume, and therefore for liquids or bulk substances this unit will always be the same, no matter what it is: water, sour cream or sand, there will always be the same volume in the same container. A milliliter is also a unit of volume and is equal to exactly one cubic centimeter. In other words, 1 cube = 1 cubic centimeter = 1 ml. But the weight will depend on the density of the substances; the higher it is, the greater the weight will be in one unit of volume. For example, 1 ml of water is equal to 1 gram, but sunflower oil has a higher density than water and therefore the weight of 1 ml of oil will be more than 1 gram, therefore 1 cube is equal to 1 ml, but the number of milligrams will depend on the density of the substance that is being measured .

Cube is a kind of slang that is used in medicine. In fact, there is no such official measure of volume or mass. A cube is one milliliter of a certain solution. That is, when they say that you need to inject a cube of drugs, they talk about one milliliter.

Accordingly, when purchasing the syringes themselves, they ask how many cubes this manipulation tool is needed for.

As for the mass, nothing can be said for sure; this parameter will change. Still, solutions have different densities, which means that with the same volume they will have different masses. And we rarely see exactly the mass of the injected drug. Even if we are talking about powder, we still use a solvent.

A cube is a colloquial term for one milliliter. That is, 1 cube is 1 milliliter of medicine in liquid form in a syringe.

It is more difficult to convert the number of milligrams into a cube - it depends on the medicine. Usually the annotation indicates how many active substances and auxiliary components in grams are contained in one milliliter of the medicine.

While in the department (regardless of which one - therapeutic, surgical, cardiology, intensive care), one way or another you have to deal with injections.

Procedure nurses and other nurses most often use this word - cube (2 cubes, 5, 10 cubes, etc.).

A medical “cube” is a milliliter:

1 cube is 1 ml;

2 cubes is 2 ml;

5 cubes is 5 ml.

For example, to make a cube of analgin - inject 1 ml of analgin.

As for mg, it (the amount of substance) is determined by the percentage of the substance in the ampoule/vial.

5 cc syringe how many ml?

Report a violation

Answers

The word dice itself is a medical term. One syringe cube contains one milliliter. Therefore, a syringe with two cubes contains two milliliters. A syringe with three cubes contains three milliliters. A four-cc syringe contains four milliliters. And five cubes contain five milliliters. All other cubes of the syringe are calculated similarly. The more cubes, the more milliliters in a given syringe.

How many milliliters are in a syringe 5

5 cc syringe Pavel S ()

INSULIN SYRINGE. Ask at the pharmacy Inna Solodilova ()

For a 3 ml solution, it is more convenient to take 5 ml syringes, there are divisions (on the syringe) - everything is labeled 1,2, 3,4,5 - this is ml, you need to draw enough solution through the needle so that the liquid ends at mark 3 Downstream ( )

Usually 1ml = drop. There are special “sticks” that end in a round tip, which is usually how they drip. Zaretskii Kostya ()

1 ml is 1 cubic cm of liquid. If this liquid is water, then this = 1 gram.

How many milliliters are in an insulin syringe?

The most accessible method of administering insulin to hormone-dependent diabetics is the use of special syringes. They are sold complete with short sharp needles. It is important to understand what a 1 ml insulin syringe means and how to calculate the dosage. Diabetic patients are forced to inject themselves. They must be able to determine how much hormone to administer based on the situation.

Composition of drugs

To calculate insulin in a syringe, you need to know what solution is used. Previously, manufacturers made medications containing 40 units of the hormone. On their packaging you can find the U-40 marking. Now we have learned to make more concentrated insulin-containing liquids, which contain 100 units of the hormone per 1 ml. Such containers with solution are marked U-100.

In each U-100, the dose of the hormone will be 2.5 times higher than in U-40.

To understand how many ml are in an insulin syringe, you need to evaluate the marks on it. For injections, different devices are used, they also have U-40 or U-100 signs. The following formulas are used in the calculations.

  1. U-40: 1 ml contains 40 units of insulin, which means 0.025 ml - 1 U.
  2. U-100: 1 ml - 100 IU, it turns out, 0.1 ml - 10 IU, 0.2 ml - 20 IU.

It is convenient to distinguish instruments by the color of the cap on the needles: for a smaller volume it is red (U-40), for a larger volume it is orange.

The dosage of the hormone is selected by the doctor individually, taking into account the patient’s condition. But it is extremely important to use the necessary injection agent. If you draw a solution containing 40 units per milliliter into a U-100 syringe, using its scale as a guide, it will turn out that the diabetic will inject 2.5 times less insulin into the body than planned.

Markup features

You need to figure out how much of the drug is required. Injection devices with a capacity of 0.3 ml are available for sale, the most common being 1 ml. This precise size range is designed to ensure that people can inject a strictly defined amount of insulin.

The volume of the injector should be based on how many ml are indicated by one marking division. First, the total capacity should be divided by the number of large pointers. This will give you the volume of each of them. After this, you can count how many small divisions are in one large one, and calculate using a similar algorithm.

It is not the applied stripes that need to be taken into account, but the spaces between them!

Some models indicate the value of each division. A U-100 syringe can have 100 marks, broken up by a dozen large ones. They are convenient for calculating the required dosage. To administer 10 units, it is enough to draw the solution up to the number 10 on the syringe, which will correspond to 0.1 ml.

U-40s typically have a scale from 0 to 40, with each division representing 1 unit of insulin. To administer 10 units, you should also dial up the solution to the number 10. But here it will be 0.25 ml instead of 0.1.

The amount should be calculated separately if the so-called “insulin” is used. This is a syringe that holds not 1 cube of solution, but 2 ml.

Calculation for other markings

Usually, diabetics do not have time to go to pharmacies and carefully select the necessary equipment for injections. Missing the deadline for administering the hormone can cause a sharp deterioration in well-being; in particularly difficult cases, there is a risk of falling into a coma. If a diabetic has a syringe on hand intended for administering a solution with a different concentration, he has to quickly recalculate.

If a patient requires a one-time injection of 20 units of a drug labeled U-40, and only U-100 syringes are available, then you should draw not 0.5 ml of solution, but 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate by it! You need to choose the same 20 units.

How else are insulin syringes used?

ASD fraction 2 - this remedy is well known to most diabetics. It is a biogenic stimulant that actively affects all metabolic processes occurring in the body. The drug is available in drops and is prescribed to non-insulin-dependent diabetics with type 2 disease.

ASD fraction 2 helps reduce the concentration of sugar in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then a syringe if we are not talking about injections? The fact is that the liquid should not come into contact with air, otherwise oxidation will occur. To prevent this from happening, and also for accuracy of administration, syringes are used for the set.

Let's calculate how many drops of ASD fraction 2 are in the “insulin”: 1 division corresponds to 3 particles of liquid. This amount is usually prescribed when starting the drug and then gradually increased.

Features of various models

There are insulin syringes on sale that are equipped with removable needles and are of one-piece construction.

If the tip is soldered to the body, the medicine will be completely removed. With fixed needles, there is no so-called “dead zone” where part of the drug is lost. It is more difficult to achieve complete removal of the medication if the needle is removed. The difference between the amount of hormone collected and injected can reach up to 7 units. Therefore, doctors advise diabetics to purchase syringes with non-removable needles.

Many people use the injection device several times. This is prohibited. But if there is no choice, then the needles must be disinfected. This measure is extremely undesirable and is only permissible if the syringe is used by the same patient and it is impossible to use another one.

The needles on the “insulin”, regardless of the number of cubes in them, are shortened. The size is 8 or 12.7 mm. The release of smaller versions is impractical, since some insulin bottles are equipped with thick stoppers: the medicine may simply not be removed.

The thickness of the needles is determined by special markings: a number is indicated next to the letter G. You should focus on it when choosing. The thinner the needle, the less painful the injection will be. Given that insulin is administered several times daily, this is important.

What to pay attention to when performing injections

Each vial of insulin can be used multiple times. The remaining amount in the ampoule should be stored strictly in the refrigerator. Before administration, the drug is warmed to room temperature. To do this, remove the container from the cold and let it stand for about half an hour.

If you have to use a syringe multiple times, it must be sterilized after each injection to prevent infection.

If the needle is removable, then different models should be used to collect the medicine and administer it. Large ones are more convenient for taking insulin, while small and thin ones are better for injections.

If you need to measure 400 units of the hormone, you can take it into 10 syringes marked U-40 or 4 syringes labeled U-100.

When choosing a suitable injection device, you should focus on:

  • The presence of an indelible scale on the case;
  • Small step between divisions;
  • Needle sharpness;
  • Hypoallergenic materials.

You should take a little more insulin (1-2 units), since some amount may remain in the syringe itself. The hormone is taken subcutaneously: for this purpose, the needle is inserted at an angle of 75 0 or 45 0. This level of tilt allows you to avoid hitting the muscle.

When diagnosing insulin-dependent diabetes, the endocrinologist must explain to the patient how and when the hormone should be administered. If children become patients, the entire procedure is explained to their parents. For a child, it is especially important to correctly calculate the dose of the hormone and understand the rules for its administration, since a small amount of the drug is required, and an excess of it should not be allowed.

How many ml in a syringe cube

Sumamed was prescribed, but I can’t figure out how much to give it, there is a suspension of 100 mg/5 ml dosage for children: at the rate of 10 mg/kg body weight once a day, the child weighs 22 kg (5.5 years old), how many milliliters should I give the child? The set includes a measuring syringe up to 5 milliliters. I can't think straight :(. The topic has been moved to another conference, it is recommended to discuss it there! When writing a new topic, please stick to the topic of the conference.

Dilution of medicine for injection. Pediatric medicine

Dilution of medicine for injection. Medicine and health

The child was prescribed injections of Cortexin 10 mg, it is in the form of a powder in a bottle, just as much as we need, and the medicine needs to be diluted with novocaine so that it does not hurt. novocaine - it is written on the package injection solution 5 mg/ml/10 ampoules of 5 ml/, The doctor prescribed novocaine 0.5% -2.0, i.e. for dilution, do I need to take a little less than half an ampoule of novocaine? Or am I wrong?

It’s easier to buy a 2.0 ml syringe; by shading you will definitely get 2.0 ml

Can you take a break from the big stuff and help me with a small everyday problem? :-)) For example, I need to give my little boy 20 drops of syrup 20 minutes before meals. And he consumes all his food in the garden. So how can I technically give him these 20 drops right in front of the garden gate? Should I just drop it onto a spoon or are there other methods that are still unknown to me? 🙂

Urgently. Pediatric medicine

what is “draw 8 units into an insulin syringe” (we are treating an animal)

what is written on the stripes?

How to drink bacteriophage? Child from 1 to 3

Girls, please give me some advice!! We were diagnosed with Staphylococcus aureus. You need to drink bacteriophage. But the problem is that the last time we drank it was in infancy from a syringe, and now we are 3 years old and under no circumstances does our daughter want to drink it (it tastes bad and smells disgusting). I stuffed half a spoon into it, and it vomited :-(. No matter what I diluted it, the smell remained. Tell me how to take the medicine. It’s very necessary.

Who gave the injections to the child, a question for you. Child from 1 to 3

Please advise. My daughter is 1 year and 3 months old. They prescribed intramuscular injections, 1.2 cc of medicine (I use a 2 ml syringe). Do I need to attach another needle for intramuscular injections or can I inject with the one that comes with the 2 ml syringe? It is 7 mm long less than the “intramuscular” one from a 5 ml syringe, but my mother says that IM needles should be used even for infants to avoid bumps (a pediatrician told her so at one time). The needle from a 2 ml syringe is thinner and about 3.5 mm long. It's easier for me.

Tell me about peptides, please. SP: get-togethers

Please tell me who is in the know))) How to mix them. There is a set for expression wrinkles and a moisturizer. I sit with them like a monkey with glasses. Do you pour all the contents of the ing into the base or do you need to measure something with syringes? I couldn't find a leaflet with instructions. Heelp!! PS. The peptides were collected here, if anything)))

Consider, as an example, a recipe for a serum against expression lines:

Matrixyl Synthe’6 2%

Since we are only adding 6% of the actives, we don't need a thickener or preservative.

We take a standard package of 50g or 20g and calculate the % input for each component

To find out the weight of assets for input, we must multiply 50g/20g by the required % of the asset

If you have a 20g package, then 0.2x4=0.8g

For Matrisil: 0.5x2=1g (for 50g), 0.2x2=0.4g (for 20g)

You can measure all the components with a regular syringe from the pharmacy (they are sterile), after removing the needle. It is better to take a separate syringe for each component.

This cream can be stored in the refrigerator for 6 months. Without the risk of losing its properties, rancidity or violation of microbiological standards.

cedex. Child from 1 to 3

They prescribed Cedex for otitis media, 2 ml. Everything there is in mg. It’s a suspension. Question: 1 mg = 1 ml or not?

Please help me, how much to “hang in grams” is the medicine..

Sumamed was prescribed, but I can’t figure out how much to give it, there is a suspension of 100 mg/5 ml dosage for children: at the rate of 10 mg/kg body weight once a day, the child weighs 22 kg (5.5 years old), how many milliliters should I give the child? The set includes a measuring syringe up to 5 milliliters. I can't think straight :(.

Probably like this: 10mg*22=220mg, i.e. 11ml.

It turns out, 2 measuring syringes and another 1 ml.

How to give medicine to a child: 5 rules. Health of a child up to one year

Children's medications are also often produced in the form of rectal suppositories, and in order to administer them, you will need some skill, but this procedure is not at all difficult for moms and dads. What, how much and how often Before giving your child medicine, carefully read the instructions for its use. Read what the drug should look like, its consistency, and be sure to check the expiration date of the drug. Pay attention to the storage conditions of the drug: some medications must be stored at a certain temperature, without access to light, or even in the refrigerator. Ask your doctor in detail in advance about the dosage and how much.

You cannot independently reduce or increase the dosage of the drug or complete the course of treatment earlier than recommended by the doctor. We measure correctly Never give medicine by eye. If a special measuring spoon or dispenser is attached to the drug (usually it comes in the form of a graduated syringe), it is better to measure the medicine with them rather than with ordinary cutlery (a teaspoon or dessert spoon). This is more convenient (it’s easier to take the medicine from a bottle with a dispenser), and there is no risk of making a mistake with the dosage. Use the measuring device that comes with this medicine: you should not take a dispenser from another medicine, even if outwardly it seems to you that it does not mean anything.

Questions about EPI for Ukrainian women and not only. Other children

There are a lot of questions, little time, so I’m throwing everything into one topic. Manyunya and I are now in the hospital. We ended up with a series of severe attacks, were supposed to be discharged on Thursday, and then it hit us: (In general, it’s just terrible. We drink 3 cubes of Depakine syrup (I measure it with a syringe) and now we’ve added Lamictal, one-eighth, twice a day. Increase the dose And the little one is getting worse: (Yesterday our doctor talked to me. They suspect that we don’t just have epilepsy, but that it’s caused by a genetic disorder, c.

Our non-geneticists have also seen all sorts of genets. signs - whatever we didn’t suspect, and “happy doll syndrome” because of the beautiful face and long eyelashes, and our sky is really gothic :)))

But neither the kareotype nor the amino acid analysis showed anything :))

How to pour perfume? SP: get-togethers

Girls, I remember purchasing molds from us. How did you bottle them? I really need to share the perfume))) and where can I buy empty bottles? Thank you

For me, unscrewing turns out to be final - I have to pour everything out

Survey about CORTEXIN. Other children

I searched and searched, read something, but I still want to make it a separate topic. Girls, who injected their children with CORTEXIN? It is advisable to write point by point :) The questions are: 1. Dosage and frequency. How many days is the course, every other day or every day? 2. What did they breed with? Novocaine or saline solution? 3. How did the children tolerate the injection itself? Is he sick? 4. Diagnosis of the child. 5. Results (positive) after the course, if any, what were they? 6. Side effects, deterioration - if yes, what?

Please help me calculate the dosage of the medicine. Pets

for my dog, 3 kg. You need to add cocarboxylase to the dropper at a dosage of 0.02. It is sold in a dosage of 50 mg. Neither the doctor nor the pharmacists at the pharmacy could really tell me how to get 0.02 as a result. The package contains ampoules with 50 mg cocarboxylase powder and 2 mg ampoules with water for injection. I asked at the pharmacy if I should take 5 ml spirtz. no, you need 2 ml. I read the instructions - it says dilute in a 5 ml syringe. but that's okay, let's buy it. how to measure 0.02? For some reason they told me that.

5 milligrams - how much? Child from 1 to 3

Girls, who knows, 5 milligrams is how much - a teaspoon or less? Otherwise, the doctor prescribed us a medicine, and it says - give a single dose - 5 milligrams.

How much pyrantel for prevention? Pediatric medicine

I bought pyrantel suspension for my child. I didn't understand anything from the instructions. ASCARIDOSIS AND ENTEROBIOSIS. MIXED INVASIONS - once at a dose of 10 mg per kg. Next is the table (I remove the unnecessary, the child is 3 years old) age dose of the drug number of 2 years - 6 years 250 mg 1 measure = 5 ml ANKYLOSTOMIASIS: prescribed at a dose of 10 mg per kg for three days NEKATOROSIS: for severe forms, prescribed at a dose based on 20 mg per kg for three weeks. I don’t understand how to give it to a child for prevention (it seems to me that...

It must be given once. All family members should drink Pirantel at the same time. For adults, the dose is also determined to be 10 mg per kg, or if an adult weighs up to 75 kg, 15 ml of Pirantel is needed, i.e. 3 measurements.

Clean your home. Change your underwear.

To relieve itching, wash your child and apply at least some baby cream. If you suspect that your child has pinworms, then this is not prevention, but treatment. If there are no worms, then the drug does not work on missing worms, i.e. it will not prevent the appearance of worms.

I simply explained the doses to you, this is not advice to take or not take the drug - it should be your decision.

Supplementary feeding: in what cases is it worth additionally feeding the child?

After some time, he may become ravenous and eat much more. The baby's stomach is used to a small volume of milk, so it will take several days before it can accommodate more food. Slow bottle feeding gives your baby the opportunity to stop eating when he's full. Within a week, you will understand how much supplemental feeding your baby needs at different times of the day. Offer supplementary feeding first, then breastfeeding. Some babies breastfeed better on a full stomach. If the baby has not gained weight well, he needs not only to grow, but also to catch up. Accelerated growth requires more food, so it is not surprising that the baby eats so much at first. Rapid growth at this time will be noticeable along a steeper curve.

Devices for supplementary feeding of an infant Supplementary feeding method Pros Cons Comments Spoon An easy and quick way for a small amount of supplementary feeding. Labor-intensive and inconvenient for large amounts of supplementary feeding. A good way to supplement with colostrum. Pipette, disposable syringe or periodontal syringe with a curved end (convenient to use for breastfeeding) An easy and quick way for a small amount of supplementation. Labor-intensive for a large volume of supplementary feeding. Place your baby on your lap so that his head is elevated. Place your feet on a coffee table, etc. During supplementary feeding, let your baby suck his thumb. Make sure that the tip of the syringe or pipette does not touch the baby's palate or cheek. Not much.

Sperm: the struggle for quality. Analyzes and examinations before.

Quantity and quality The first thing that is determined in the laboratory is the liquefaction time of the ejaculate. At first, the sperm is absolutely liquid, then it quickly thickens, and after some time, under the influence of prostate enzymes, it becomes liquid again. The correctness of the transformations can be judged by the change in viscosity. To do this, the ejaculate is drawn into a syringe and released through a special needle. Viscosity is measured by the length of the “thread” that follows the released drop. Sperm is considered liquefied if the “thread” does not exceed 2 cm. Normally, this occurs within 10–40 minutes. If the process is delayed, then? there are problems with the prostate gland. After liquefaction using indicator paper, the semen is tested for acidity. WHO recommend.

How many 30 drops are in milliliters? About yours, about your girl’s

At my request, my husband bought Morozov drops (those that help fall asleep) in the production department of the pharmacy, so these goats (I can’t call them otherwise) are now packaged in ordinary bottles that do not allow dripping through the lid. Just measure out 30 drops the way you want:((If only they had warned him, he would have taken a pipette. There is an idea to mark with a syringe, but I can’t find the volume of the drop.

Young mother, or the first days in the maternity hospital. Adjusting the chest.

They determined the norm at 40 g for each feeding and told her to wake up and feed Anya every 2 hours, counting from the start of feeding. A bottle was urgently purchased and I started pumping. But now, because colostrum began to be replaced by milk and my breasts were full for the 4th day, I began to experience stagnation. I couldn’t squeeze more out of my bust, which was swollen like two pillows, no matter how much I crushed it. Even the maternity hospital electric breast pump, which hummed at full power, but only squeezed out a couple of drops, did not help. By that time, the mechanical one that had been given to me was already at home, and there was no way to pick it up. If I couldn’t get milk, then what was it like for my weakened daughter to do it! One of the weighings, for example, display.

Well done you for fighting. The husband is gold. I wish you all more joy.

I'm a mom in a cube! Multiple pregnancy

Mom in a cube: the real story of an ordinary woman who successfully carried and gave birth to triplets, while maintaining an excellent sense of humor.

And now - one is yelling, the second is sleeping, the third has crap himself. Who should I run to, what should I do? I'm in the hospital. I’m lying alone in the ward with three others. Thanks to the maternity hospital, I at least learned to swaddle there. The seam hurts, my head is spinning, but I have to wash the floors not only in my room, but also in the common kitchen, run with three to the treatment rooms and to the doctors’ offices, which are located on different floors, hand over and receive diapers, keep a diary, when, who and how much he ate and peed, collect urine, carry the babies every day for control weighing and weigh them herself after each feeding. I don't have a second to sleep. At night the worst thing begins. The kids have a tummy ache and they howl in unison. “This will pass by three months. Or maybe we won’t make it to three,” the nurse on duty says distantly and slowly leaves. I'm going crazy. Last

Artificial feeding. Artificial feeding

How to correctly calculate the required volume of the mixture? When artificial feeding, it is important to determine the required amount of nutrition for the child. The daily amount of food depending on the age of the baby is shown in table 1. For example, if the baby is 1 month old and weighs 3500 g, then the daily amount of food is 1/5 of body weight, i.e. 700 ml. To determine how much formula you need per feeding, divide the daily amount of food by the number of feedings. Approximate number of feedings during the day: first week of life - 7-10; 1 week - 2 months - 7-8; 2-4 months - 6-7; 4-9 months - 5-6; 9-12 months - 4-5. It should be noted that if during breastfeeding.

Parent handicrafts. Part 2. Caring for a child up to one year old

How to care for and treat a baby at home.

Moreover, if the drops are placed in a sterile bottle, then we have the opportunity not to break its seal: we wipe the rubber stopper with alcohol, pierce it with a needle and draw it into a syringe. Remove the needle from the bottle and disconnect it from the syringe. As a result, we have a container with a sterile solution. A container that does not spill or break, which is convenient to heat and convenient to use. Nose In order for the medicine to have an effect, it is a good idea to clean the nose first, if, of course, there is an accumulation of mucus in the nasal passages. Children of conscious age

Neither more nor less. How much amniotic fluid is needed?

Oligohydramnios and polyhydramnios during pregnancy. Possible complications, features of childbirth

The increase in volume occurs unevenly. In the first trimester, at 10 weeks of pregnancy, the amount of amniotic fluid averages 30 ml, per week - about 100 ml, at 18 weeks, etc. The maximum volume is observed in the second week of pregnancy, averaging ml. By the end of pregnancy, the amount of water may decrease to 800 ml as a result of increased fluid excretion from the woman’s body. Amniotic fluid performs a number of important functions. They create conditions for the free movement of the fetus, protect its body from adverse external influences, and protect the umbilical cord from compression between the fetal body and the walls of the uterus. Thus, the volume of amniotic fluid is a kind of indicator of the normal course of pregnancy. What.

Look! I myself looked for the answer for a long time, but then I found it on this site.

Just what the doctor ordered. We give medicine to the baby.

It is unacceptable to use drugs that have expired, were stored incorrectly, have signs of spoilage, or have erased or illegible inscriptions. Rule three: follow the dose, time, method of administration, frequency and duration of use of the medicine prescribed by your doctor. Before the doctor leaves, check whether you understood the dosage regimen correctly: how much, how, when (before, during or after meals), how often and for how long the child should take the medicine. Never give medicine “by eye” - measure the prescribed dose using a special measuring spoon, graduated pipette, measuring tube or syringe without a needle; Before giving medicine to your child, check that you have measured the dose accurately. Use only clean measuring cups. Taking medications should be regulated.

If there is such a need, then divide the tablet very precisely with a sharp knife. For a more accurate dosage, you can use a disposable syringe without a needle. For example, a child needs to be given 1/8 of a tablet: draw exactly 8 ml of boiled water into a syringe, release it into a cup, then crush the whole tablet and dissolve it there, then draw only 1 ml of solution into the syringe from a cup and let the baby drink. The solution prepared from crushed tablets can only be used immediately after its preparation - it cannot be stored and is used once; For the next dose of the drug, the solution is prepared again.

Not enough milk? It's worth looking into! Part 1. Establishing breastfeeding.

The use of breast substitutes: pacifiers or bottles with a nipple. A simple rule works here: “sucking the nipple - minus feeding (minus breast stimulation for sufficient lactation and minus a certain amount of milk for the baby).” Supplementing the baby with water and/or other liquids. It is obvious that no matter how much the baby drank, he did not eat the same amount of mother’s milk. Water fills a tiny stomach and gives a false feeling of fullness. It is known that plain water (not the kind found in mother's milk) is not absorbed by the child, i.e. has nothing to do with the prevention or treatment of dehydration, but only passes through the baby’s gastrointestinal tract, washing away the flora that breast milk “helps populate.”

Kogitum - can open ampoules be stored? Other children

Cogitum was prescribed, 1/4 ampoule 2 times a day. Considering the price of the drug, I would like to use the ampoule for at least a day, or even better, for two. Can it be stored open, has anyone checked? Thank you

Mom is giving injections - I need help. We need your experience and knowledge.

Who has experience in this matter? I need your help, otherwise my brain is about to boil :) We prescribed a course of treatment for the child, prescribed a bunch of medications, incl. you need to give injections: 1. Cerebrolysin 1.0 ml intramuscularly 2. Actovegin 2.0 ml intramuscularly 3. Neuromidin 5 mg 0.5 ml intramuscularly The injections will have to be given to the mother, i.e. to myself. I’m terribly afraid, and I’ve never given injections myself in my life. I only have experience in diluting Cortexin injections and, accordingly, I saw where to inject and how to administer. Those. With.

Please convert drops to ml. SP: get-togethers

You need to give the child 10 drops of medicine, but there is no pipette:-(there is a syringe. If you are not too lazy, please measure how many ml to give.

The child refused the breast. Part I. Weaning

Over time, with regular feeding, the nipple takes on a normal appearance. If that doesn't work, feed with feeding pads. You can try to pull out the nipple. True, it was better to start doing this before giving birth. Make a simple mechanism: remove the piston from a 5 ml disposable syringe, use a knife to cut off the part of the syringe where the needle is inserted to make a tube. Insert the piston into the cut end. Place the free end (where the finger rests) on the nipple and pull the plunger so that the nipple is pulled into the syringe. Leave it for a while. With regular exercise, the nipple will stretch. Different breasts Reason. It is easy to suck on one breast, but difficult on the other for some reason.

©, 7ya.ru, Certificate of registration of mass media El No. FS.

Reprinting messages from conferences is prohibited without indicating a link to the site and the authors of the messages themselves. Reproduction of materials from other sections of the site is prohibited without the written consent of ALP-Media and the authors. The opinion of the editors may not coincide with the opinion of the authors. The rights of authors and the publisher are protected. Technical support and IT outsourcing are provided by KT-ALP.

7ya.ru - information project on family issues: pregnancy and childbirth, raising children, education and career, home economics, recreation, beauty and health, family relationships. The site hosts thematic conferences, blogs, ratings of kindergartens and schools, articles are published daily and competitions are held.

If you find errors, problems, or inaccuracies on the page, please let us know. Thank you!

One cube contains one milliliter, and the number of grams of medicine can be found in the annotation.

One cube is the colloquial term for one milliliter or one large division on a syringe. One milliliter of water weighs approximately one gram. That is, one syringe cube contains one gram of water. Medical preparations based on an aqueous solution will weigh approximately this much, since the content of denser active substances in them is several times less and has practically no effect on the weight of the cube. Even if an alcohol solution is indicated on the package, you should remember that this is a very low percentage alcohol solution and there is still more water in it. So count one cube as one gram and you won't be much mistaken.

You can find out how many grams of active substance are contained in one cube (in 1 milliliter) on the medicine packaging. In front of me now is a package of diclofenac, 1 cube contains 25 mg of active ingredient. Each drug has a different dosage.

1 cube in a syringe is 1 milliliter, and how many grams of the active substance is written on the injection box.

One cubic centimeter is called a cube of medicine, but the cube holds different numbers of grams. Medicines administered through injection have different ratios of grams to milliliters. To do this, you need to look at the instructions or packaging; the recommended number of milligrams is indicated there, and the definition of a cube is used by experienced doctors and nurses.

A cube is a measure of volume equal to one cubic centimeter. A gram is a measure of mass. There are approximately 250 milligrams in one milliliter. And in order to calculate accurately, you need to read the information about the density on the packaging and perform simple arithmetic operations.

Everything will depend on the density of the liquid itself. Still, the chemical composition of each medicine is different, the concentration of the various components is not equal, so it is impossible to say exactly how many grams are in one cube.

Those. in order to find out the amount of the substance in grams, you must refer to the instructions for the medicine/injection liquid. Plus, usually manufacturers indicate the active active ingredient separately in grams (i.e., the main one), and separately the auxiliary components, also in grams.

See the photo above as an example. The data is not written down here, as in injections, but the active substance and auxiliary substances are clearly visible in the photo.

If we talk about water, then in one cube there will be 1 ml - volume and 1 mg - weight. But for other liquids, the mass in mg may vary, since it also depends on the density of the substance. But this information must be on the medicine packaging.

When they say one cube, they mean one cubic milliliter. If we take one cube of water as an example, its weight will be 1 gram. For medicines, the weight of the cube will depend on their composition. Usually the packaging indicates how much all the components included in a cubic millimeter of medicinal solution weigh.

1 ml is how much in a syringe

1 ml in a syringe is how many mg

In the section Diseases, Medicines, the question Help! What's the ratio? How much is 1 ml in a syringe? Or if they prescribed 3 ml (for example), what syringe should you take? asked by the author Lena Karpova, the best answer is For 3 ml of solution it is more convenient to take 5 ml syringes, there are divisions (on the syringe) - everything is labeled 1,2, 3,4,5 - this is ml, you need to draw enough solution through the needle so that the liquid ended at 3

5 cc syringe

INSULIN SYRINGE. Ask at the pharmacy

Usually 1ml = drop. There are special “sticks” that end in a round tip, which is usually how they drip.

1 ml is 1 cubic meter. cm liquid. If this liquid is water, then this = 1 gram.

You need a 2.5 milliliter syringe. At 6 there is a big needle. Why do you need it?

How much is 1 ml in a syringe?

5 cc syringe Pavel S ()

INSULIN SYRINGE. Ask at the pharmacy Inna Solodilova ()

For a 3 ml solution, it is more convenient to take 5 ml syringes, there are divisions (on the syringe) - everything is labeled 1,2, 3,4,5 - this is ml, you need to draw enough solution through the needle so that the liquid ends at mark 3 Downstream ( )

Usually 1ml = drop. There are special “sticks” that end in a round tip, which is usually how they drip. Zaretskii Kostya ()

1 ml is 1 cubic cm of liquid. If this liquid is water, then this = 1 gram.

1 mg is how many ml in a syringe?

Report a violation

Answers

To compare milligrams, milliliters and divisions in a syringe, it is necessary to determine the value of each of these concepts: 1 mg is 0.001 g (thousandth part) or 0.kg (millionth part); 1 ml is 0.001 l (thousandth part), in relation to water and liquids of similar density, the equality 1 ml = 1 g is true. = 1 cc; The divisions of conventional syringes are numbered by the number of milliliters or cubic cm; The divisions between the numbers of a regular syringe have dashes, the division value of which is 0.2 ml = 20 mg. (with 4 lines) or 0.25 ml = 25 mg. (with 3 dashes). Accordingly, it is not possible to draw up a volume of 1 mg with a regular syringe; for this you need a pipette or an insulin syringe (the price of 1 division in a 0.3 ml syringe is 0.005 ml, which is equal to 5 mg).

Report a violation

You need to make 0.2 g. Ceftriaxone, how much to draw in the syringe

How many ml are in 1 syringe cube? How many mg are in 1 syringe cube?

1 cube in a syringe is how many ml (milliliters)?

1 cube in a syringe is how many mg (milligrams)?

Syringe cubes, slang name for its capacity in ml. One cube in a syringe means one ml. medicinal solution. One ml. water, weighs one gram. This means that in one cube or milliliter of water there will be 1000 mg of the weight of this water. The number of mg of the drug in the ampoule is determined by the percentage. For example, we have one ampoule of 1% diphenhydramine with a volume of one ml. In dry form, the amount of diphenhydramine is in 1 ml, its 1% solution will be 0.01 g. That is, 10 mg.

A cube is the colloquial name for a cubic centimeter, and if we talk about a syringe cube, it means 1 milliliter (a milliliter is equal to a cubic centimeter).

Thus, 1 cube of a syringe will always equal 1 ml of liquid or drug solution.

There are syringes of different capacities - 1 ml, 2 ml, 5 ml, 10 ml, etc.

Based on the above:

A 1ml syringe is the same as a 1cc syringe.

A 5ml syringe is the same as a 5cc syringe.

A 10ml syringe is the same as a 10cc syringe.

As for the number of mg (milligrams) in a syringe cube, this value will depend on what kind of liquid or medicine is in it.

For example, if you take water, then 1 ml of water = 1 gram of water = 1000 mg of water. That is, 1 cube of a syringe is 1000 mg of water.

In the case of medications, the amount of mg in 1 ml and in 1 cube of a syringe will depend on how much active substance is in 1 ml of solution.

This information is usually indicated on the annotations for the medicine.

The drug Gentamicin. On the packaging you can see the following information:

"Solution for intravenous and intramuscular administration 40 mg/ml."

"Solution for intravenous and intramuscular administration 80 mg / 2 ml."

This means that in 1 milliliter there will be 40 mg of the active substance (gentamicin sulfate).

If the single dosage is 100 mg, then for injection you need to draw 100 / 40 = 2.5 milliliters or 2.5 syringe cubes.

1 cube is the colloquial name for one cubic centimeter, i.e. this is a unit of volume, and therefore for liquids or bulk substances this unit will always be the same, no matter what it is: water, sour cream or sand, there will always be the same volume in the same container. A milliliter is also a unit of volume and is equal to exactly one cubic centimeter. In other words, 1 cube = 1 cubic centimeter = 1 ml. But the weight will depend on the density of the substances; the higher it is, the greater the weight will be in one unit of volume. For example, 1 ml of water is equal to 1 gram, but sunflower oil has a higher density than water and therefore the weight of 1 ml of oil will be more than 1 gram, therefore 1 cube is equal to 1 ml, but the number of milligrams will depend on the density of the substance that is being measured .

Cube is a kind of slang that is used in medicine. In fact, there is no such official measure of volume or mass. A cube is one milliliter of a certain solution. That is, when they say that you need to inject a cube of drugs, they talk about one milliliter.

Accordingly, when purchasing the syringes themselves, they ask how many cubes this manipulation tool is needed for.

As for the mass, nothing can be said for sure; this parameter will change. Still, solutions have different densities, which means that with the same volume they will have different masses. And we rarely see exactly the mass of the injected drug. Even if we are talking about powder, we still use a solvent.

A cube is a colloquial term for one milliliter. That is, 1 cube is 1 milliliter of medicine in liquid form in a syringe.

It is more difficult to convert the number of milligrams into a cube - it depends on the medicine. Usually the annotation indicates how many active substances and auxiliary components in grams are contained in one milliliter of the medicine.

While in the department (regardless of which one - therapeutic, surgical, cardiology, intensive care), one way or another you have to deal with injections.

Procedure nurses and other nurses most often use this word - cube (2 cubes, 5, 10 cubes, etc.).

A medical “cube” is a milliliter:

1 cube is 1 ml;

2 cubes is 2 ml;

5 cubes is 5 ml.

For example, to make a cube of analgin - inject 1 ml of analgin.

As for mg, it (the amount of substance) is determined by the percentage of the substance in the ampoule/vial.

How many units of insulin are in 1 ml

Director of the Diabetes Institute: “Throw away your blood glucose meter and test strips. No more Metformin, Diabeton, Siofor, Glucophage and Januvia! Treat him with this. »

Today, the cheapest and most common option for administering insulin into the body is the use of disposable syringes.

Due to the fact that less concentrated solutions of the hormone were previously produced, 1 ml contained 40 units of insulin, so in the pharmacy you could find syringes designed for a concentration of 40 units/ml.

Today, 1 ml of solution contains 100 units of insulin; appropriate insulin syringes of 100 units/ml are used for its administration.

Since both types of syringes are currently available for sale, it is important for diabetics to carefully understand the dosage and be able to correctly calculate the administered rate.

Otherwise, if they are used incorrectly, severe hypoglycemia may occur.

Markup features

So that diabetics can easily navigate, a graduation is applied to the insulin syringe, which corresponds to the concentration of the hormone in the bottle. Moreover, each marking division on the cylinder indicates the number of units, not milliliters of solution.

So, if a syringe is intended for a concentration of U40, on the marking where 0.5 ml is usually indicated, the indicator is 20 units; at the level of 1 ml, 40 units are indicated.

In this case, one insulin unit is 0.025 ml of the hormone. Thus, the U100 syringe has a reading of 100 units instead of 1 ml, and 50 units at the level of 0.5 ml.

For diabetes mellitus, it is important to use an insulin syringe only at the required concentration. To use insulin 40 units/ml you should buy a U40 syringe, and for 100 units/ml you need to use the corresponding U100 syringe.

What happens if you use the wrong insulin syringe? For example, if a solution with a concentration of 40 units/ml is drawn into a U100 syringe, instead of the expected 20 units, only 8 will be obtained, which is more than half the required dosage. Similarly, when using a U40 syringe and a solution of 100 units/ml, instead of the required dose of 20 units, 50 units will be drawn.

So that diabetics can accurately determine the required amount of insulin, the developers came up with an identification mark that can be used to distinguish one type of insulin syringe from another.

In particular, the U40 syringe, sold today in pharmacies, has a red protective cap, and the U 100 has an orange protective cap.

Insulin syringe pens, which are designed for a concentration of 100 units/ml, are similarly graduated. Therefore, in the event of a device failure, it is important to take this feature into account and purchase only U 100 syringes from the pharmacy.

Otherwise, if the wrong choice is made, a severe overdose is possible, which can lead to coma and even death of the patient.

Therefore, it is better to purchase a set of necessary tools in advance, which will always be kept at hand, and protect yourself from danger.

Needle length features

To avoid mistakes in dosage, it is also important to choose needles of the right length. As you know, they come in removable and non-removable types.

Today, insulin needles are available in lengths of 8 and 12.7 mm. They are not made shorter, since some insulin bottles still have thick stoppers.

Also, needles have a certain thickness, which is indicated by the symbol G with a number. The diameter of the needle determines how painful the insulin will be injected. When using thinner needles, the injection on the skin is practically not felt.

Determining the division price

Today you can buy an insulin syringe at the pharmacy, the volume of which is 0.3, 0.5 and 1 ml. The exact capacity can be found by looking at the back of the package.

Most often, diabetics use 1 ml syringes for insulin therapy, which can have three types of scales:

  • Consisting of 40 units;
  • Consisting of 100 units;
  • Graduated in milliliters.

In some cases, syringes may be sold that are marked with two scales at once.

How is the division price determined?

The first step is to find out how much the total volume of the syringe is; these figures are usually indicated on the packaging.

In this case, only the intervals are counted. For example, for a U40 syringe the calculation is ¼=0.25 ml, and for U100 - 1/10=0.1 ml. If the syringe has millimeter graduations, no calculations are required, since the number placed indicates the volume.

After this, the volume of the small division is determined. For this purpose, you need to count the number of all small divisions between one large one. Next, the previously calculated volume of the large division is divided by the number of small ones.

After the calculations have been made, you can dial the required amount of insulin.

How to calculate dosage

The insulin hormone is available in standard packages and is dosed in biological units of action, which are designated as units. Typically, one 5 ml bottle contains 200 units of the hormone. If you make calculations, it turns out that 1 ml of solution contains 40 units of medicine.

Insulin administration is best done using a special insulin syringe, which indicates divisions in units. When using standard syringes, it is necessary to carefully calculate how many units of the hormone are included in each division.

To do this, you need to remember that 1 ml contains 40 units, based on this, you need to divide this indicator by the number of divisions.

So, with one division reading 2 units, the syringe is filled eight divisions to inject 16 units of insulin into the patient. Similarly, with an indicator of 4 units, four divisions are filled with the hormone.

One vial of insulin is intended for multiple use. The unused solution is stored in the refrigerator on a shelf, but it is important that the medicine does not freeze. When using long-acting insulin, before drawing it into the syringe, shake the bottle until a homogeneous mixture is obtained.

After removing from the refrigerator, the solution must be warmed to room temperature by keeping it indoors for half an hour.

Home page > Insulin > Marking of insulin syringes, calculation of insulin U-40 and U-100 Marking of insulin syringes, calculation of insulin U-40 and U-100

To calculate insulin and its dosage, it is worth considering that the bottles that are presented on the pharmaceutical markets of Russia and the CIS countries contain 40 units of insulin per 1 milliliter.

The bottle is labeled U-40 (40 units/ml). Regular insulin syringes used by diabetics are designed specifically for this insulin. Before use, it is necessary to make an appropriate calculation of insulin according to the principle: 0.5 ml of insulin - 20 units, 0.25 ml - 10 units, 1 unit in a syringe with 40 divisions - 0.025 ml. Each line on an insulin syringe marks a certain volume, the graduation into insulin units is a graduation by volume of solution, and is designed for U-40 insulin (Concentration 40 units/ml): 4 units of insulin - 0.1 ml of solution, 6 units of insulin - 0. 15 ml of solution, 40 units of insulin - 1 ml of solution.

In many countries around the world, insulin is used, which contains 100 units per 1 ml of solution (U-100). In this case, it is necessary to use special syringes. Outwardly, they do not differ from U-40 syringes, however, the applied graduation is intended only for calculating insulin with a U-100 concentration. This insulin is 2.5 times higher than the standard concentration (100 units/ml: 40 units/ml = 2.5).

When calculating insulin, the patient must know that the dosage set by the doctor remains the same and is determined by the body’s need for a specific volume of the hormone. But if a diabetic used U-40 insulin, receiving 40 units per day, then when treated with U-100 insulin, he will still need 40 units. These 40 units just need to be injected with a U-100 syringe. If you inject U-100 insulin with a U-40 syringe, the amount of insulin injected should be 2.5 times less. For patients with diabetes, when calculating insulin, you must remember the formula: 40 units. U-40 is contained in 1 ml of solution and is equal to 40 units. insulin U-100 contained in 0.4 ml of solution. The dosage of insulin remains unchanged, only the volume of administered insulin decreases. This difference is taken into account in syringes designed for U-100.

I hope this information is useful and makes diabetic arithmetic easier for someone. Let's talk in this article about calculating the dose of insulin for diabetes.

Insulin is dosed in biological units of action (AU) and released in special vials. So, one 5 ml bottle contains 200 IU of insulin (there is a corresponding marking on the bottle), respectively, 1 ml contains 40 IU of the drug (200:5 = 40). It is better to inject a dose of insulin with a special syringe on which the units are indicated. When using regular insulin, before administering the drug, you need to find out how many units of insulin are in each division of the syringe. The calculation is made as follows: if 1 ml contains 40 units of insulin dose, this amount is divided by the number of divisions in 1 ml of the syringe and the amount of insulin dose in one division is obtained. For example, there are 20 divisions in 1 ml of a syringe, therefore there are 2 units in one division (40: 20 = 2). In the case when the patient needs to administer 16 units, eight divisions of the syringe are filled with the medicine. If there are 10 divisions in 1 ml of a syringe, then each division of the syringe corresponds to 4 units of insulin (40: 10 = 4). If it is necessary to administer 16 units of insulin, fill four divisions with the medicine.

Determination of the number of bread units

The main “marker” of the diet for patients with diabetes is carbohydrates. To determine their quantity in products, a conventional unit of calculation is used - a bread unit (XE). Conventionally, it contains 12 g of net carbohydrates and increases blood sugar by 1.7-2.7 mmol/l. To calculate the amount of carbohydrates in XE in the finished product, you need to divide the amount of carbohydrates in 100 g of product indicated on the original packaging by 12 and you will get the number of bread units for the same 100 g. For example, the packaging indicates that 100 g of this product contains 60 g carbohydrates. When dividing the indicated number by 12, it turns out that 100 g of this product contains 5 XE.

Glycemic load (GL) is an indicator that reflects the quantity and quality of carbohydrates contained in foods. To calculate it, the formula is used: GL = GI (%): 100 and multiplied by the amount of carbohydrates in grams. Where GI is the glycemic index, which reflects the rate of absorption of carbohydrates in the body. It allows you to roughly estimate how blood sugar will increase after consuming a particular product compared to the standard (glucose or white bread). This indicator is expressed as a percentage. For example, GI = 70 means that after consuming 50 g of this product, the blood sugar level will be 70% of what appears after consuming 50 g of pure glucose.

For example, the GI of boiled potatoes in their jackets is 65%, and 100 g of such potatoes contains 11.5 g of carbohydrates. After consuming this amount of potatoes, the glycemic load will be: GL = 65: 100 x 11.5 = 7.5. For comparison, let’s determine the same indicator for fried potatoes, the GI of which is 95%, and 100 g of it contains 23.4 g of carbohydrates - GI = 95:100 x 23.4 = 22.2. This formula shows: the more carbohydrates in a product and the higher its GI, the higher the GN index, and, consequently, the load on the pancreas sharply increases. Depending on this, the degrees of GN are distinguished - low (0-10), medium (11-19), high 20 or more (for one serving). The glycemic index of foods is indicated in special tables that are available to every diabetic.

According to experts, a significant number of people are predisposed to this disease. You can find out if you have it by answering the questions of a simple test.

Do you feel a constant, unquenchable thirst?

Do you experience discomfort due to the frequent urge to urinate, especially when you have to leave home for a long time?

Do dried drops of urine leave thick white stains on laundry, reminiscent of starch marks?

Do you periodically experience weakness and drowsiness?

Do you notice a deterioration in your vision: the outlines of objects blur, as if you are looking through fog?

Are you bothered by occasional numbness and tingling sensations in your palms and soles?

Can't get rid of acne?

Do you have very dry skin, and cuts and scratches do not heal well?

Do you worry about itchy skin, especially in the perineal area?

In recent months, have you lost 3-5 kg ​​without putting any effort into it?

Do you constantly feel very hungry, eat and can’t get enough?

The more affirmative answers you gave, the higher the likelihood of diabetes. In this case, you should immediately consult a doctor and take a blood and urine test for sugar.

Diabetes mellitus is a chronic disease in which, as a result of a lack of the pancreatic hormone insulin in the body, disturbances in carbohydrate, fat and protein metabolism occur. To treat diabetes mellitus, diet, glucose-lowering pills and insulin injections are used. It is very important for diabetic patients to be able to inject themselves with insulin.

WHAT YOU NEED TO HAVE AT HOME FOR INSULIN INJECTIONS

A special syringe with a capacity of 1 or 2 milliliters (grams) or with graduation in units, several needles (2-3 large ones for taking the medicine, and 3-4 thin ones for administering it), tweezers, cotton wool, alcohol. You should stock up on a sterilizer or set aside a small saucepan with a lid.

Before each injection, rinse the disassembled syringe, needles with mandrels (thin wires inserted inside and protecting the needles from contamination) and tweezers, fill with cold boiled water and boil in a closed sterilizer or saucepan for 15 minutes. If the syringes and needles are new, then boil them for the first time for 40-45 minutes.

HOW MUCH TO TAKE MEDICATIONS

This must be calculated in advance. Each syringe has a certain number of divisions. You need to know how many units of insulin are contained in each division. The calculation is made as follows: one milliliter contains 40 units of insulin. 40 units are divided by the number of divisions to obtain the amount of insulin per division. For example, there are 20 divisions in one milliliter of a syringe, therefore, one division contains 2 units of insulin (40:20). If the patient needs to inject 16 units of insulin, then 8 divisions of the syringe (16:2) should be filled with the medicine. One-gram syringes with 10 divisions are now available. Each division corresponds to 4 units of insulin (40:10). If it is necessary to inject 16 units of insulin with such a syringe, it is filled into 4 divisions.

Insulin is available in standard packaging. The bottle contains 5 milliliters of the drug, or 20 units. Thus, one bottle is intended for several injections. The remaining medicine, as well as unused vials, should be stored in a cool, dark place, preferably in the refrigerator, on the shelves of the door, preventing the medicine from freezing.

If you are using long-acting insulin, then before drawing it into the syringe, shake the bottle until a homogeneous mixture is formed.

Before administration, the drug removed from the refrigerator must be warmed to room temperature by keeping it in the room for about 30 minutes.

HOW TO GET MEDICINE INTO A SYRINGE

After sterilizing the syringe, needles and tweezers, the water is carefully drained. While they are cooling, use a knife to remove the circle from the aluminum cap that covers the insulin bottle, wipe the rubber stopper with alcohol, wash your hands with soap and, without covering the tap with them or wiping them with a towel, wipe your fingertips with a cotton swab moistened with alcohol. Take tweezers from the sterilizer and use them to remove and assemble the syringe without touching the plunger, syringe tip or needle with your hands. When the syringe is assembled, put a thick needle on it and remove drops of water with a few strokes of the piston.

The syringe plunger is placed slightly above the mark corresponding to the administered dose of insulin. Pierce the rubber cap with a needle and, inserting the needle 1-1.5 centimeters deep, squeeze the air in the syringe into the bottle. Then turn it with the needle up (the bottle is above the needle) and dial in insulin 1-2 divisions more than the required dose. Pull the needle out of the rubber cap and then remove it from the syringe; Use tweezers to place a thin needle on the syringe, removing the mandrel from it. Lightly press the plunger to remove air from the syringe, and let one or two drops of medicine drain from the tip of the needle (these are those extra 1-2 divisions). Now you can give the injection.

HOW TO ADMINISTER INSULIN

Insulin is injected subcutaneously into the outer surface of the shoulder, thighs, buttocks, central abdominal area and under the shoulder blades. It is more convenient to inject insulin into the thigh yourself.

Wipe the injection site with alcohol. Using the thumb and index finger of your left hand, gather the skin into a thick fold and pierce it with a sweep, almost parallel to the surface. The needle should enter the skin 1-1.5 centimeters. After this, release the fold and slowly press the plunger with your index finger or thumb.

Make sure that insulin does not leak out of the syringe. The dose of medication administered must be very precise.

When the piston has entered the syringe all the way and there is no medicine left in it, apply a piece of cotton wool moistened with alcohol to the injection site and slowly remove the needle. There is no need to massage the resulting swelling so as not to accelerate the flow of insulin into the blood. You should also not inject in the same place.

When going on vacation or a business trip, you can use a case with alcohol to keep the syringe and needle in a sterile condition. Before injection, it is necessary to carefully remove any remaining alcohol from the syringe and needle, since alcohol, if it gets into the insulin, will weaken its effect.

Syringe markings

To prevent patients from getting confused, the manufacturer applies a special graduation to the syringe, which indicates the concentration of insulin in the bottle of medicine. It is worth noting that each mark on the cylinder does not at all indicate milliliters of solution, it indicates the number of units.

Features of marking division:

  • When a syringe is needed for U40 concentrate, on the marking line, where, as a rule, 0.5 ml is written, an indicator of 20 units is observed, and at the level of 1 ml, 40 units are written.
  • With all this, 1 insulin unit equals 0.025 ml of insulin.
  • The U100 syringe has a parameter of 100 units, not 1 ml, and 50 units - 0.5 ml.

Diabetes mellitus requires the use of an insulin syringe of the required concentration. If the patient uses the hormone 40 units/ml, then U40 is required, and when the hormone is 100 units/ml, then U100.

Many patients wonder what will happen if they make a mistake and use the wrong syringe? For example, when a liquid with a concentration of 40 units/ml is drawn into the U100, instead of the required 20 units, only 8 will be obtained. That is, the dosage will be half as much as what is needed in this situation.

Another analogue can be given, when U40 and a solution of 100 units/ml are used, but in reality only 50 units will be obtained, but 20 are needed.

So that a diabetic can easily choose the required insulin syringe, manufacturers have come up with a specific identification mark to help select the required syringe:

  1. The 40 units syringe has a red protective cap.
  2. The 100 unit syringe has an orange cap.

In a similar way, you can distinguish insulin pens, which are designed for 100 units. In this regard, if for some reason the pen breaks down or is lost, it is important to know how much volume is in the syringe or insulin pen, and how to distinguish them.

In situations where the patient purchased the wrong product, an insulin overdose cannot be ruled out, which can lead to serious consequences and even death.

How to choose a needle and determine the division price?

Patients are faced with the task of not only choosing the correct volume of the syringe, but also choosing a needle of the required length. The pharmacy sells two types of needles:

Medical experts advise choosing the second option, because removable needles have the ability to retain a certain amount of the medicinal substance, the volume of which can be up to 7 units.

Today, needles are produced whose length is 8 and 12.7 millimeters. They are not produced shorter than this length, because bottles of medicine with thick rubber stoppers are still sold.

In addition, the thickness of the needle is also important. The fact is that when insulin is injected with a thick needle, the patient will feel pain. And using the thinnest possible needle, the injection is absolutely not felt by the diabetic. At the pharmacy you can buy syringes with different volumes:

In the vast majority of cases, patients prefer to opt for 1 ml, which is marked with three types of markings:

In some situations, you can purchase an insulin syringe that has a double designation. Before injecting yourself with medicine, you need to determine the entire volume of the syringe. To do this, you need to do the following:

  1. First, the volume of the 1st division is calculated.
  2. Next, the entire volume (indicated on the packaging) is divided by the number of divisions in the product.
  3. Important: you need to count only intervals.
  4. Then you need to determine the volume of one division: all small divisions are counted among all large ones.
  5. Then, the volume of the large division is divided by the number of small divisions.

How is the insulin dose calculated?

It was found out how much the volume of the syringe is, and when to choose a syringe for U40 or U100, you need to find out how to calculate the dose of the hormone.

The hormonal solution is sold in packaging manufactured according to medical standards, the dosage is indicated using BIA (biological units of action), which are designated “unit”.

Typically, a 5 ml vial contains 200 units of insulin. When you recalculate in a different way, it turns out that 1 ml of liquid contains 40 units of the drug.

Features of dosage administration:

  • It is advisable to make the injection with a special syringe that has single divisions.
  • If a standard syringe is used, then before administering the dose, you need to calculate the number of units included in each division.

The medicine bottle can be used many times. The medicine must be stored in a cold place, but not in the cold.

When using a hormone that has a prolonged effect, the bottle must be shaken before taking the medicine to obtain a homogeneous mixture. Before administration, the medicine must be warmed to room temperature.

To summarize, it is necessary to summarize that every diabetic should know what the syringe markings mean, which needle to choose correctly, and how to calculate the correct dosage. Only this knowledge will help to avoid negative consequences and maintain the patient’s health.

Syringe - syringe is different

Doctors around the world began using a special syringe for insulin injection several decades ago. Several variants of syringe models for diabetics have been developed, which are easy to use independently, for example, a pen or a pump. But outdated models have not lost their relevance.

The main advantages of the insulin model include simplicity of design and accessibility.

The insulin syringe should be such that the patient can painlessly inject himself at any time, with minimal complications. To do this, you need to choose the right model.

What does pharmacology offer?

Pharmacy chains offer syringes of various modifications. By design they come in two types:

  • Disposable, sterile, with replaceable needles.
  • Syringes with a built-in (integrated) needle. The model does not have a “dead zone”, so there is no loss of medicine.

It is difficult to answer which types are better. Modern pen syringes or pumps can be carried with you to work or school. The drug is filled in them in advance and remains sterile until use. They are comfortable and small in size.

Expensive models are equipped with electronic mechanisms that will remind you when it is necessary to give an injection, show how much medicine has been administered and the time of the last injection. Similar ones are shown in the photo.

Choosing the right syringe

The correct insulin syringe has transparent walls so that the patient can see how much medication has been drawn up and injected. The piston is rubberized and the drug is introduced smoothly and slowly.

When choosing a model for injection, it is important to understand the scale divisions. The number of divisions may vary on different models. One division contains the minimum volume of the drug that can be drawn into the syringe

Why is a graduation scale needed?

An insulin syringe must have marked divisions and a scale; if they are not there, we do not recommend purchasing such models. The divisions and scale show the patient how much concentrated insulin is inside. Typically, 1 ml of the drug is equal to 100 units, but there are expensive devices for 40 ml/100 units.

For any model of insulin syringe, the divisions have a small error, which is exactly ½ division of the total volume.

For example, if you administer a medicine with a syringe graduated in 2 units, the total dosage will be +- 0.5 units of the medicine. For the information of readers, 0.5 units of insulin can reduce blood sugar levels by 4.2 mmol/l. In a small child this figure is even higher.

Anyone with diabetes needs to understand this information. A small error, even 0.25 units, can lead to glycemia. The smaller the model’s error, the easier and safer it is to use the syringe. This is important to understand so that the patient can accurately administer the insulin dose on their own.

To administer the drug as accurately as possible, follow the rules:

  • the smaller the division step, the more accurate the dosage of the administered drug will be;
  • It is better to dilute the hormone before administration.

A standard insulin syringe has a capacity of no more than 10 units for administering the drug. The division step is marked with the following numbers:

Insulin labeling

On the market in our country and the CIS, the hormone is produced in bottles with a solution of 40 units of the drug per 1 ml. It is marked U-40. Standard disposable syringes are designed for this volume. Calculate how many ml in units. division is not difficult, since 1 Unit. 40 divisions equal 0.025 ml of the drug. Our readers can use the table:

Now let’s figure out how to calculate a solution with a concentration of 40 units/ml. Knowing how many ml are on one scale, you can calculate how many units of the hormone are produced in 1 ml. For the convenience of readers, we present the result for marking U-40 in the form of a table:

Insulin labeled U-100 is found abroad. The solution contains 100 units. hormone per 1 ml. Our standard syringes are not suitable for this medicine. Need special ones. Their design is the same as U-40, but the graduation scale is designed for U-100. The concentration of imported insulin is 2.5 times higher than our U-40. You need to calculate based on this figure.

How to use an insulin syringe correctly

We recommend using syringes for hormonal injections, the needles of which are not removable. They do not have a dead zone and the medication will be administered in a more precise dosage. The only drawback is that after 4-5 times the needles will become dull. Syringes with removable needles are more hygienic, but their needles are thicker.

It is more practical to alternate: use a disposable simple syringe at home, and at work or elsewhere a reusable one with a non-removable needle.

Before drawing the hormone into the syringe, the bottle must be wiped with alcohol. For short-term administration of a small dose, there is no need to shake the medication. A large dosage is available in the form of a suspension, so shake the bottle before taking it.

The piston on the syringe is pulled back to the required division and the needle is inserted into the bottle. Air is forced inside the bubble, the piston and the medicine under pressure inside are drawn into the device. The amount of medication in the syringe should slightly exceed the administered dose. If air bubbles get inside, you should lightly tap it with your finger.

It is correct to use different needles for drawing up the drug and administering it. To take the medication, you can use needles from a simple syringe. An injection can only be given using an insulin needle.

There are a number of rules that will tell the patient how to mix the drug correctly:

  • First, short-acting insulin should be drawn into the syringe, then long-acting;
  • Short-acting insulin or NPH should be used immediately after mixing or stored for no more than 3 hours.
  • Intermediate-acting insulin (IAI) should not be mixed with long-acting suspension. The zinc filler converts the long hormone into a short one. And this is life-threatening!
  • Detemir and long-acting insulin Glargine cannot be mixed with each other or with other types of hormones.

The place where the injection will be given is wiped with a solution of antiseptic liquid or a simple detergent. We do not recommend using an alcohol solution; the fact is that the skin of diabetic patients dries out. Alcohol will dry it out even more, causing painful cracks to appear.

Insulin must be injected under the skin, not into muscle tissue. The needle puncture is done strictly at an angle of degrees, shallow. You should not pull out the needle after administering the drug; wait 10–15 seconds for the hormone to distribute under the skin. Otherwise, the hormone will partially come out into the hole from under the needle.

General calculation rules

An important rule in the algorithm for calculating the dose of insulin is that the patient needs no more than 1 unit of the hormone per kilogram of weight. If you ignore this rule, an overdose of insulin will occur, which can lead to a critical condition - hypoglycemic coma. But to accurately select the dose of insulin, it is necessary to take into account the degree of compensation of the disease:

  • In the first stages of type 1 disease, the required dose of insulin is selected at the rate of no more than 0.5 units of the hormone per kilogram of weight.
  • If type 1 diabetes is well compensated for a year, then the maximum dose of insulin will be 0.6 units of the hormone per kilogram of body weight.
  • In severe cases of type 1 diabetes and constant fluctuations in blood glucose levels, up to 0.7 units of the hormone per kilogram of weight is required.
  • In the case of decompensated diabetes, the insulin dose will be 0.8 U/kg;
  • For gestational diabetes mellitus – 1.0 U/kg.

So, the insulin dose is calculated according to the following algorithm: Daily insulin dose (IU) * Total body weight/2.

Example: If the daily dose of insulin is 0.5 units, then it must be multiplied by body weight, for example 70 kg. 0.5*70 = 35. The resulting number 35 must be divided by 2. The resulting number is 17.5, which must be rounded down, that is, 17. It turns out that the morning dose of insulin will be 10 units, and the evening dose – 7.

What dose of insulin is needed for 1 unit of bread?

A bread unit is a concept that was introduced to make it easier to calculate the administered dose of insulin immediately before a meal. Here, not all products that contain carbohydrates are taken into account in the calculation of bread units, but only those that are “counted”:

In Russia, one unit of bread corresponds to 10 grams of carbohydrates. One unit of bread is equal to a slice of white bread, one medium-sized apple, two teaspoons of sugar. If one bread unit enters the body, which is unable to independently produce insulin, then the glycemic level increases in the range from 1.6 to 2.2 mmol/l. That is, these are exactly the indicators by which glycemia decreases if one unit of insulin is administered.

It follows from this that for each unit of bread taken, about 1 unit of insulin must be administered in advance. That is why it is recommended that all diabetics acquire a table of bread units in order to make the most accurate calculations. In addition, before each injection it is necessary to control glycemia, that is, find out the level of sugar in the blood using a glucometer.

If the patient has hyperglycemia, that is, high sugar, the required number of units of the hormone must be added to the corresponding number of bread units. In case of hypoglycemia, the dose of the hormone will be less.

Example: If a diabetic has a sugar level of 7 mmol/l half an hour before meals, and he plans to eat 5 XE, he needs to administer one unit of short-acting insulin. Then the initial blood sugar will decrease from 7 mmol/l to 5 mmol/l. Also, to compensate for 5 bread units, you need to introduce 5 units of the hormone, for a total insulin dose of 6 units.

How to choose the dose of insulin in a syringe?

To fill a regular syringe with a volume of 1.0-2.0 ml with the required amount of medicine, you need to calculate the cost of dividing the syringe. To do this, you need to determine the number of divisions in 1 ml of the instrument. The domestically produced hormone is sold in 5.0 ml bottles. 1 ml is 40 units of the hormone. 40 units of the hormone must be divided by the number that is obtained by counting the divisions in 1 ml of the instrument.

Example: There are 10 divisions in a 1 ml syringe. 40:10 = 4 units. That is, 4 units of insulin are placed in one division of the syringe. The dose of insulin that needs to be injected should be divided by the price of one division, thus you will get the number of divisions on the syringe that must be filled with insulin.

There are also pen syringes that contain a special flask filled with hormone. By pressing or turning the syringe button, insulin is injected subcutaneously. Before the injection, the required dose must be set in pen syringes, which will enter the patient’s body.

How to administer insulin: general rules

Insulin is administered according to the following algorithm (when the required volume of medication has already been calculated):

  1. Hands should be disinfected and medical gloves should be worn.
  2. Roll out the bottle of medicine in your hands so that it is evenly mixed, and disinfect the lid and stopper.
  3. Fill the syringe with air in the amount in which the hormone will be injected.
  4. Place the bottle of medicine vertically on the table, remove the cap from the needle and insert it into the bottle through the stopper.
  5. Press the syringe so that the air from it enters the bottle.
  6. Turn the bottle upside down and fill the syringe with 2-4 units more than the dose that should enter the body.
  7. Remove the needle from the bottle, release the air from the syringe, adjusting the dose to the required level.
  8. Disinfect the place where the injection will be given twice with a piece of cotton wool and an antiseptic.
  9. Inject insulin subcutaneously (with a large dose of the hormone, the injection is done intramuscularly).
  10. Treat the injection site and the instruments used.

For rapid absorption of the hormone (if the injection is subcutaneous), it is recommended to give an injection in the stomach. If the injection is given in the thigh, absorption will be slow and incomplete. An injection into the buttocks, the shoulder has an average absorption speed.

You can get more information about the insulin injection technique here: http://diabet.biz/lechenie/tradicionnaya/insulin/tehnika-vvedenija-insulina.html.

Extended insulin and its dose (video)

Long-acting insulin is prescribed to patients to maintain normal fasting blood glucose levels so that the liver has the opportunity to produce glucose constantly (and this is necessary for brain function), because with diabetes the body cannot do this on its own.

Extended insulin is administered once every 12 or 24 hours, depending on the type of insulin (two effective types of insulin are used today - Levemir and Lantus). A diabetes control specialist explains in this video how to correctly calculate the required dose of extended-release insulin:

The ability to correctly calculate insulin doses is a skill that every insulin-dependent diabetic should master. If you choose the wrong dose of insulin, an overdose may occur, which, if assistance is not provided in a timely manner, can result in death. The correct doses of insulin are the key to the well-being of a diabetic.