How to make a hookah with your own hands at home? Homemade hookah. How to make a hookah from a bottle

Sometimes you don’t have a hookah at hand, but you really want to smoke. A real hookah man will always find a way out of the situation. How to make a homemade device from improvised materials?

The ability to create “everything out of nothing” will also be useful for those who want to create their own unique products. Everything you have in your apartment or dacha can be used as a smoky smoke if you have the right hands. We are ready to give tips 😉

Accessories: what to make the bowl, flask and shaft from?

There may be several reasons for deciding to make narghile at home:

Saving. The cheapest device will cost approximately 3,000 rubles. Homemade - up to 500.
Broken parts. If something from a factory device suddenly becomes unusable, accessories made from scrap materials come to the rescue.
The desire to create your own device. You can do more than just carve a beautiful cup of fruit with your own hands. If your hands grow from the right place, eggplants, flasks, old computers and non-working equipment can be an excellent basis for an author's nargile.

Without reliable connections that do not allow air to pass through, any device will smoke poorly, will not produce smoke, and the taste will be “lost” on the way to the smoker. Therefore, ensuring the tightness of all connections is task number one.

Materials must be clean and must be free of foreign odors. Otherwise, you can smoke cigarette tobacco or sand - you won’t feel the difference in the output. Ideally, use new or thoroughly washed and dried parts.

Bowl– the simplest part in terms of alternatives, and gives a lot of ideas for creativity. First of all, open the refrigerator and see what is there that could potentially serve as chilim: fruits, berries, even vegetables and sausage! Any product in this role will diversify smoking, add certain notes to tobacco and will certainly surprise the company.
Options close to the original: sink strainer, metal cans, foil. Handicraftsmen make chilims from clay themselves. Such experiments often later lead to the opening of a small (and maybe large!) business 😉
Flask- the simplest. Any container that can be covered with a lid and created a seal is suitable: even a soccer ball. A container made of watermelon or pumpkin looks impressive and imparts a distinct aroma during the session; this is simply impossible to achieve with chemical additives.
Hose- the thing is more complicated. You can buy the cheapest one for a couple of dollars, but this will violate the concept of “craft” narghile! No, we do not agree to such sacrifices.
There is advice on the Internet “use a metal shower hose.” In general, if you like the taste of metal, for God's sake. This accessory will ruin the entire taste palette; it does not provide any flavor. Lick the hair clip and you will understand what this hookah will taste like.
Corrugated plumbing pipe - shows itself perfectly in handmade shisha. Just take a new piece! If there is a plastic smell, ventilate with a vacuum cleaner or leave it in the open air (on the balcony, for example, but out of the sun) for a couple of days.
Another option is not flexible, as in primitive nargil. They can serve as bamboo, a silicone tube for an aquarium, or a cocktail tube (if you plan to make a small device).
Mine- this is what all the creators of shisha at home think about. Where can I find a stainless steel tube of the required length and diameter? Metal materials are more often used, but here again we are faced with the problem of taste. It is not always present, but until the moment of smoking you will not understand whether it is there or not.
Foil is used as a disposable pipe. A little shocking, isn't it? 😉
Foil is nothing more than compressed metal. The thinnest sheet is used for packaging food and preparing shisha :)
One layer is a very unstable “substance” that bends in all directions. Achieving rigidity:
1. We take a solid cylindrical product suitable in diameter (an old water tap, the “leg” of a table lamp, etc.);
2. We wrap the foil around it in layers until we get a fairly strong structure. It is important to do this smoothly, avoiding as much as possible the appearance of cracks and bumps;
3. Carefully remove our “base” and get a disposable shaft, which you just need to insert into the flask.
  The downside of this approach is that the design is rather fragile; you should work with it very carefully; installing the chilli nozzle can be a difficult test, but we are sure you can handle it!

How to make a hookah: step-by-step instructions

When you already know what is suitable for inventing a smoking unit, we suggest that you familiarize yourself with our vision of a manual device.

Step 1. Materials

You will need the following things:

Once you have these items, you can start crafting.

Step 2. Assembly

We make a hole in the lid from it - one for the hose and another, smaller one, directly opposite the first one - for the smoke to escape.

Now we insert the tube and rubber stopper, fasten the lid and stopper with powerful glue.

We close the jar. Attention: the tube must not touch the bottom.

Step 3. Finishing Touches

We insert the hose into the hole made in the lid. Make sure everything fits together tightly.

Smoking is, of course, harmful. But the fragrant smoke of a hookah is something completely different. Sometimes even the strictest fighters against bad habits do not want to deny themselves such pleasure. You can smoke in a campaign, or you can smoke alone, but sometimes you’re too lazy to go to a hookah bar or it’s far away, and there’s no hookah at home.

Well, all that remains is to make it with your own hands. And now we will look at how this is done. To make a hookah with your own hands, drawings are not particularly required - everything is clear from the description on an intuitive level.

What does a hookah consist of?

Its main part is the flask. In a homemade device, an old, out-of-print one (preferably a metal one) will serve just fine. Another important element is the hose. It’s good if you haven’t had time to part with your old shower hose. If you have time, you will have to buy the cheapest option at a plumbing store.

As other spare parts, we take a steel damper for the sink, an unnecessary burner from a gas stove and a small iron tube with a diameter of about 3 cm. The only tools you need to take care of are the soldering rod.

Making a hookah with your own hands - the main steps

First, the most difficult thing is making a hookah shaft. We connect the steel tube and the tile burner as follows: we turn one end of the pipe into a cone, then we simply hammer the pipe into the burner. If everything is done correctly, the structure will be sealed and durable.

Then you need to drill a hole in the kettle for the pipe. It is done in the lid and must be sized to fit the tube. To ensure maximum fixation, provide the pipe with small grooves. Then we lower it into the kettle approximately to the level of the base of its spout, and seal the upper connection. We remove the cover and after that the structure is sealed from below. The adhesions are cleaned. Now the hookah shaft is ready!

What's next?

The next step is to connect the hose. We cut off a piece from the spout of our teapot at such a distance that the hole in the remaining part exactly matches the diameter of the hose - for a tight connection. We push the rubber part of the hose into the spout and secure it with electrical tape.

The braid from the hose together with the nut is put on the spout of the kettle. Then the lid and the entire kettle are sealed with foil, and a funnel is twisted from it and placed in the burner. A washbasin net is placed on the burner, and your hookah is ready with your own hands - you can try it out.

Of course, making this device will require some effort, but as a result you will get a high-quality device for reusable use. If you have the desire and creativity, you can get a stylish and original hookah with your own hands - the photos shown here demonstrate the flight of imagination of the authors.

Do-it-yourself hookah from a bottle - fast and cheap

But what to do when you have absolutely no desire to bother with soldering and other issues, and the idea of a home hookah can’t get out of your head?

From a 2-liter plastic bottle you can make an excellent hookah with your own hands without much expense. In addition to the bottle, you need a tin can, tubes for the dropper system, a rubber stopper, a piece of tube, foil and a knife.

This hookah option is simple and economical. Three holes are made in a plastic bottle, a pair next to each other, and a third opposite them. After that, holes are cut out in the bottom of the jar with a knife, and a wide hole is made on the other side of the jar.

The rubber plug, which will serve as a seal, is also provided with a hole. Then a metal-plastic tube is placed inside the bottle, water is poured in, and everything is closed with a stopper. Tubes are inserted into a couple of holes in the bottle and a tin can is secured. The third of the holes must also be closed (for example, with the body of a ballpoint pen). Tobacco is poured into the jar, and the top is covered with foil with holes pierced.

Fruit hookah

Do you want to enjoy aromatic smoke with minimal effort? Try to make a hookah with your own hands (the simplest design) from an empty plastic bottle (or an ordinary glass) with any fresh fruit - say, an apple. Each of the fruits will add its own characteristic aroma to the hookah smoke, as a result we have a richer taste, and tobacco with fruit juice does not dry out so quickly.

Before work, stock up on the fruit itself, a toothpick, foil, a knife, coal and tobacco. Take dense fruits so that they can withstand high temperatures longer. It would be desirable to be able to remove the seeds from them while preserving the original shape of our fruit.

In addition to apples (green ones are best), you should pay attention to pears, melons, grapefruits, and pomegranates. Avoid oranges, bananas, tangerines and red apples - their resistance to heat is much lower.

The selected fruit will serve as a bowl. First, pour cold water into the flask of the disassembled hookah to a level three centimeters above its tube. We cut off the top of our fruit “bowl” with a knife, take out the pulp so that tobacco can be poured inside. Before that, cover the bottom of the fruit with foil with small holes made with a toothpick. After adding tobacco, the top is covered with the same foil.

Electronic hookah

In large cities, the idea of an electronic hookah has found its implementation in a similar way to the situation with electronic cigarettes. Smokers of such hookahs subsequently abandoned traditional cigarettes and switched to electronic ones. What is the difference between them, can these means replace each other, and is an electronic hookah equivalent to a traditional one?

Anyone who wants to enjoy an electronic hookah does not need to fill the bowl or light the coals. It is prepared in a few minutes. Versions of it exist both with and without nicotine. In the West, such hookahs are usually produced in the form of electronic cigars or hookah sticks; in our country, the version of the traditional form, reminiscent of a regular one, is more common.

Essentially, this is the same electronic cigarette combined with a hookah form. You can make an electronic hookah with your own hands by converting the classic hookah body to higher power and an air intake system that allows you to achieve the same effect as with traditional smoking.

The device placed inside is quite simple and is a steam generator in the form of a nichrome strip. Having reached the desired temperature, the aromatic water is converted into steam. The process is designed to take about 40 minutes, but the hookah assembled by yourself may taste slightly bitter.

Many people prefer to use hookah, but no one realizes that it is possible to make a hookah from a bottle. This article will look at how to make a hookah from a bottle using something that almost every person has in their home. The main attribute of this method is an ordinary plastic bottle, but how can you make a hookah from a bottle that will not be inferior in its properties to an expensive unit? The undeniable advantage of this method is its cost, because with the money saved from buying a real hookah you can buy truly important things.

Let's start this method by taking this bottle, preferably 2 liters in volume, so that it has more steam, and making 2 holes in it. This is done so that the tubes that will transmit steam to our respiratory organs fit freely into these holes and are not pinched. Next, you need to make a similar hole on the side of the bottle as we did in the previous step of the method; it is advisable to make it on the other side.

For the next point of this method, you will need a 0.33 liter tin can, which can easily be bought in a store, especially since they fully satisfy our budget plan. Next, in the same aluminum can you need to make many holes with a knife so that our tobacco flares up well and the hookah does not taste bitter, observing safety precautions and not making holes by holding the can in your lap. Another material for the hookah will be a regular piece of plastic curved tube, which can be bought at any hardware store; it will be inserted into the tin can that we prepared earlier. The hole in the jar should be on the back side and, preferably, of such a size that the tube fits into this hole without problems, but does not get pinched. A similar operation needs to be done with a rubber stopper, which in this method will act as a kind of seal for a budget hookah.

Next, the process of connecting all parts of the hookah into one structure will take place in order to check the functionality of the entire method. We put the tube into a two-liter bottle and make sure that the bottom of the tube does not come into contact with the bottom of the bottle, otherwise the hookah will not work. The next action will be to fill the container with the optimal amount of liquid, because if there is too much water, the splashes of water will flood the entire table. Next, you need to secure the rubber tube to the bottle, this is done simply: we press on it until the process of fixing with the neck of the bottle occurs. Then, very carefully and carefully insert the hoses into the two slots that were cut at the very beginning of the method, and make sure that the tubes are firmly fixed.

Next, we fix the jar on a plastic tube, making sure that the entire structure is securely fastened, because an unstable structure can tip over the hookah along with the coals, and this is very dangerous. We take tobacco and carefully pour it onto a tin can; choose tobacco or smoking mixture of your choice, but pour it in such a way that the layer thickness is no more than 1 centimeter.

To give a more piquant aroma and taste of tobacco, it is advisable to rub the jelly-like mass a little in your palms to separate the leaves and pieces of fruit from each other, then the hookah will reward you with the noble taste of fruits and all kinds of aromas. You also shouldn’t forget about the air gap between the bottom of the tin can and the foil covering it; it should reach levels of four to five centimeters, only then will the tobacco burn evenly. Now we need to talk about the foil itself: its area should be about twenty square centimeters, the canvas should be folded in half and a few holes should be made using nail scissors; a cat’s paw will also work perfectly.

Next, we’ll insert some kind of plug into the hole on the other side; a ballpoint pen is good for this task. All that remains is to choose the type of coal: self-igniting, or one that needs to be heated over a fire for a couple of minutes. It would seem that the choice is simple, but you always have to pay for simplicity. Spontaneous combustion coals have a slightly bitter or sour taste; for some, this negative factor will be decisive in favor of ordinary coals. Special attention should be paid to almost the most important part of the hookah: this is the liquid through which our aroma of fruits or other overseas spices and sweets will pass. For a large company of five to six people, 0.5 liter milk for 1 hookah is perfect; girls will really like this product, because it has a slightly sweet and mild taste. For a group of young people, a hookah made from budget beer or expensive absinthe or chacha is a good choice.

Is it possible to make a good hookah yourself from improvised materials? Many hookah lovers are interested in this issue, especially in those moments when you really want to smoke, but there is no hookah at hand. There are several ways to make a hookah at home from scrap materials, which we will discuss below.

A little history

Hookah- a smoking device known to many. The smoke that is inhaled is cooled and filtered in the shaft (tube) of the device. The liquid inside the vessel retains approximately 40% of the various substances in the smoke.
History says that the first hookah was made in India and was used for pain relief during illnesses. Instead of tobacco, it was filled with hashish mixed with spices and medicinal herbs.

Method 1. Hookah from a plastic bottle

Let's remember what components the hookah is made of. Usually this:

bowl;
mine;
flask;
hose with mouthpiece .

A flask is a container, usually made of glass, containing water that helps cool the smoke. A do-it-yourself hookah flask can be made from any container. Of course, we immediately remember an ordinary bottle.

How to make a hookah with your own hands from an ordinary plastic bottle? You will need to take:

Our readers have discovered a guaranteed way to quit smoking! This is a 100% natural remedy, which is based exclusively on herbs, and mixed in such a way that you can easily, without extra costs, without withdrawal symptoms, without gaining excess weight and without stress, get rid of nicotine addiction ONCE AND FOR ALL! I want to quit smoking..."

2 liter bottle;
foil;
two plastic covers of different sizes;
apple;
handset;
toothpicks;
hookah tobacco;
coal.

First of all, you should make holes in the caps for the tube. After the lids are pressed together at the tops, the tube is threaded so that it ends up inside the bottle.
A do-it-yourself hookah bowl is made from an apple. To do this, the top of the fruit is cut off and the core is removed. Afterwards, a recess is made at the base of the “bowl” the same size as the diameter of the small lid. You need to make small holes at the bottom with something thin and sharp. This will allow the smoke to flow well, but will not allow the tobacco to fall through.
At the very end, a hole is made into which the hose will be inserted and the hookah at home is ready! All that remains is to pour water into the bottle, pour in tobacco, put foil on top, and add hot coal.

Method 2. Hookah from vegetables and fruits

It is not always necessary to look for plastic bottles, because you can build a hookah from fruits or vegetables. Below we will tell you how to make a hookah with your own hands at home.
In this case, you can use a glass instead of a bottle, and apples, oranges, watermelon or zucchini will act as a bowl. The principle of making this homemade hookah is the same as in the previous version. The only difference with this option is the aroma of fruit, which will complement the smoke.
Before smoking, it is recommended to cool the glass so that the smoke also cools faster.
Interesting fact: In Israel and Turkey, hookah is called nargyleh and nargile. Translated, this word means coconut. It was from this nut that the vessel of the device was made in ancient times.

Method 3. Wooden hookah

This is a great option for those who like to do things with their own hands and are good with tools. A hookah made of wood and clay is no longer just a disposable device, but a real work of art. But making it is still not as easy as the previous options.
A home-made wooden hookah can be an excellent gift or decorate your interior. At first glance, it seems that wood is the optimal material for such a device, because it will often be exposed to moisture and high temperatures. Nevertheless, it is this material that can give the taste of smoke special notes, which depend on the chosen type of wood.

Method 4. Watermelon hookah

Such a hookah at home turns out to be disposable, but it is quite easy to make. For the bowl, take any round fruit, for example an apple or grapefruit. The top of the fruit is cut off and the core is removed so that the wall thickness is approximately half a centimeter.
As a shaft for a hookah with your own hands, you can use an aluminum tube or a tube made of food-grade stainless steel. Other metals can change the taste of tobacco. If it is difficult to find such a tube, then you can take a thick marker or pencil and wrap food foil on it.
To make a flask we take a watermelon. The upper part of the watermelon is cut to fit a shaft of the required diameter, and the pulp of the berry is removed. Subsequently, it can be used instead of water, after thoroughly grinding it.
It is better to purchase a hose for such a homemade hookah at home in a specialized store. But a flexible shower hose or a thin plastic corrugated pipe is also suitable for this.

Method 5. Hookah from a glass jar

To make such a glass hookah with your own hands, you will need a 3-liter glass jar, an aquarium hose, a bowl, a rubber stopper, a tube, super glue, and a lid for the jar.
So, let’s start assembling a hookah from a jar with our own hands. First of all, we make two holes in the lid - the first for the hose, the second for the smoke to escape. We insert the tube and rubber stopper, while securing the stopper and lid with glue. The length of the tube should be equal to the height of the jar, but at the same time slightly short of reaching the bottom. The jar can be closed with a lid.
We secure the hose well in the hole made. Place the bowl on top. All that remains is to pour the liquid, add tobacco and your hookah at home is ready!

Other hookah elements and accessories

One of the elements of this smoking device is a diffuser, which you can make yourself quite quickly. It helps to divide the flow of smoke entering the shaft, smooth out the draft, and break larger liquid bubbles into soft ones so that the hookah does not gurgle. This device also helps improve filtration and cooling of smoke, making the smoking process easier.

Making a hookah diffuser with your own hands is not so difficult. To make it you can take:

Kinder chocolate packaging - surprise. A hole for the shaft is cut out on one side of the package, and many small holes are made on the other side using a large needle.
A film jar is perfect, with which you need to do the same as in the previous version.
You can also use foil. A sheet measuring about 15x20 cm is folded in half.
Small holes are also made in the center. After this, the foil is wound around the finger to make something like a confidant, and then the resulting structure is put on the shaft.
A rubber hose with a diameter of 3-4 cm is perhaps the simplest and fastest option.
Holes are made at the bottom of the hoses, and the resulting diffuser is put on the shaft.
You can also use a thimble. We drill holes in it, put it on, fasten it well and everything is ready.
You may also need a brush to care for your hookah. It helps to get rid of contaminants inside the bowl, flask, and hose of the device. If for some reason you urgently need this thing, but don’t have it at hand, then you can make a hookah brush with your own hands. To do this, you need to take a fishing line, the length of which is twice as long as the shaft, and wrap a rag around the fishing line. Then we insert the fishing line into the tube and clean it until we have washed out the maximum amount of dirt.

Tobacco

If you decide to make your own hookah, you may also need a tobacco recipe that you can make yourself.
To prepare you will need molasses, tobacco from cigarettes or pipes (preferably pipe), glycerin and essential oils that you like. Molasses can be replaced with honey or jam.
Because purchased tobacco is too strong, some of the strength will have to be removed. To do this, you need to pour the required amount of tobacco with just boiled water, pass it through a sieve, squeeze it out and dry it in the oven, setting the temperature to minimum. Mix dry tobacco with a small amount of purchased tobacco, pour in 2 tubes of glycerin, 5-10 drops of essential oil. Add molasses until the mixture resembles thick jam. The finished mixture should be placed in a jar and left for a week.

Homemade hookah bag

Whether it’s a hookah made at home or bought in a specialty store, it’s a fragile thing. If you plan to carry the device with you to friends or on vacation, you should consider a bag for this device.

To sew a bag at home you will need:

sewing machine with a thick needle;
scissors;
meter;
a piece of chalk and a pencil;
paper;
textile;
braid.

First of all, you need to make a pattern for a hookah bag. On the Internet you can find many options for such patterns. First, the pattern is drawn on paper and then transferred to the fabric. After the pattern is ready. All elements are connected, the bag is decorated with locks, chains, etc.
As you can see, making a hookah from improvised materials at home is not very difficult. Having such a device at home, you can always relax and enjoy your vacation. You don’t even need to go to a hookah bar for this. By making a hookah with your own hands, you can surprise your friends, and you yourself will enjoy it.

A little about secrets..

The history of tobacco smoking in the world does not go back very long since the beginning of the Europeans’ exploration of the American continents, where the Indians have been using the plant for more than two thousand years. Having quickly spread thanks to trade routes, tobacco found supporters among various pseudo-scientific healers who were enamored with fashion, fortunately not for long. In eastern countries, smoking tobacco was approached more thoroughly and leisurely than the fussy Europeans, making the process a kind of ritual for relaxation, peace and a pleasant pastime. It was in India that the first hookahs appeared, making it possible to impart softness, pleasant coolness and a wide variety of aromas to tobacco smoke. In our article we will tell you how to make a real hookah yourself quickly and easily at home, correctly and without much expense!

How to make a hookah at home: making your choice

Modern hookahs are made from high-quality materials to avoid unwanted flavor impurities. Such smoking devices are easy to clean, convenient to disassemble and last much longer than their copper and brass counterparts. Design solutions in the production of such devices allow you to purchase a high-quality and original model. Traditional hookahs remain popular due to their relative affordability and oriental flavor. A properly made hookah at home is not inferior, and sometimes superior, to purchased copies and, of course, will cost much less.

The design of hookahs is simple; the main rule in its manufacture is tightness. At the end of the article, you can watch a detailed video on making various structures at home.

The simplest homemade hookah can be made in a matter of seconds from a plastic bottle. You will need a regular half-liter plastic bottle and a tube more than 10 cm long as a mouthpiece. IN The container is filled about a third full with filter liquid, after which the bottle is tilted directly in the hands and a hole is made in the side to insert the tube. The lower end of the mouthpiece must be immersed in the liquid a couple of centimeters to achieve a filtering effect. Tobacco is stuffed into a cigarette, inserted into the mouthpiece and smoked through the neck of the bottle. The advantages of a hookah from a bottle include its availability, speed of assembly and smoking, undemanding quality of tobacco and the absence of coal. The main disadvantages, of course, are almost one-time use and “unpresentableness”. And you won’t be able to really relax with such a hookah - you need to constantly keep it in the same inclined position.

Let's look at serious, “adult” hookahs that you can assemble yourself from scrap materials, piece by piece:

1) The hookah flask is designed for filter liquid. Any container from a glass to a large five-liter bottle is suitable for this purpose. The main requirements for this part of the smoking apparatus are a tight lid, no leaks and stability sufficient to support the entire structure of the apparatus. You need to make a hole in the lid of sufficient size for the hookah shaft. The number of smoking holes and their location are determined depending on the container and the presence of hoses, for example, to make a hookah from a bottle, it is better to make 1-2 holes on the side, above the level of the filter liquid. In glass or small vessels it would be more appropriate to make a stopper with the necessary holes. There are options for making a flask from large fruits of watermelon, melon or pumpkin.

There are no special restrictions for the filter liquid; juices, milk, wine and even plain water are suitable. Beginning hookah smokers should not immediately experiment with strong alcoholic drinks; the effect can be much more noticeable than intended.

2) The hookah shaft performs the functions of pre-filtration and cooling of smoke. For a homemade hookah, metal tubes with a diameter of 1-3 cm are best suited; due to condensation, heavy impurities remain best on the metal. A piece of plastic pipe left over after repair is also quite suitable. In the most extreme case, you can use ordinary foil, wound around an object of the required diameter in several layers necessary for rigidity. The shaft is inserted into the hole of the flask and sealed at the joint with rubber, foil, plasticine or simple chewing gum. Please note that the shaft must be lowered into the filter liquid to a depth of 2-3 cm and secured in this position. This will prevent you from straining your lungs too much when smoking. You can lower the shaft tube to the very bottom, after making a cut or hole at the desired level.

3) The tobacco bowl has special requirements for heat resistance. Depending on skill and imagination, cups are made with your own hands from wood, gas burners, a tea strainer, or even sculpted from clay. For one-time use, a small piece of fruit can be used as a bowl. The holes in the bowl should be small enough so that the tobacco does not fall into the shaft and large enough so that air can freely flow through, otherwise smoking the hookah will become extremely difficult. Cover the top of the bowl with foil with holes on which the smoldering coal will be placed. The optimal distance between the coal and the tobacco layer is approximately 1 cm. The bowl is hermetically secured to the shaft; in the case of fruit, you just need to press it tightly into the shaft so that there are no gaps.

4) Everyone chooses tubes and hoses for a hookah according to the availability of material and their own preference. Dropper pieces or plastic corrugation are suitable. At worst, you can use chewing gum to secure a cocktail tube in the hole; this, of course, will reduce the mobility of the smoker, but will allow you to fully experience the functionality of the hookah you made yourself. Remember to keep the pipes and hoses clean to avoid unpleasant flavors in the smoke.

Video on the topic of the article

Creating a hookah at home or in the countryside yourself can be turned into an exciting activity, it all depends only on your skills and imagination. The video will help you choose the option that's right for you.