How to prepare melt water at home? The healing qualities of melt water and methods of obtaining it

Melt water can be called the elixir of health and youth. This is a high quality pure “product” containing a minimal amount of heavy and deuterium water. Melt water has invaluable benefits for the human body of any age. It is a natural energy booster, provides a significant boost of energy, saturates the entire human body with health and strength. Melt water can cause harm only if it is used in excess or if the cooking technology at home is violated.

What are the benefits of drinking melt water?

Properly prepared and properly taken melt water brings undoubted benefits to the body, which is expressed in accelerating metabolic processes, getting rid of allergies of any kind, eczema, neurodermatitis, psoriasis, removing toxins and waste from the body, strengthening the immune system, improving digestion, increasing efficiency, activating memory, improving sleep.

Also, drinking melt water has a positive effect on blood quality, heart function, and helps.

The use of melt water in the treatment of skin diseases, along with the prescribed treatment, helps eliminate itching, irritation and hyperthermia on the third or fourth day of treatment. At the same time, the period of transition of the pathological process to the regressive stage is accelerated.

Drinking pure liquid slows down the aging process of the body. Melt water helps to activate metabolism, remove harmful substances from the body, accelerate metabolic processes in the body, which helps get rid of extra pounds and gradual gentle weight loss occurs.

What structure do we get after defrosting?

Melt water is obtained from melted ice. When water freezes, its structure changes.

It has been proven that water absorbs information. To remove “bad” information, water needs to acquire energetic purity in order to return to its original structure. Freezing and its subsequent defrosting help restore its energy purity. As a result of simple actions, the composition of water is “reset to zero”, its original state is restored - energetic, informational and structural.

Drinking pure glacial water helps cleanse the blood in the human body. What does pure blood give? Blood carries useful substances to all organs. Purified blood in the body helps to activate immune processes, regulate metabolism, activate brain activity, cleanse blood vessels and reduce cholesterol levels in the blood. In order to start all these processes, it is necessary to consume at least 200 ml of melt water daily.

Properties of melt water

Ordinary water, after freezing and subsequent thawing, changes its structure. Its molecules become smaller and are similar in structure to the protoplasm of the cells of the human body. This allows molecules to easily penetrate cell membranes. Thanks to this process, the body's chemical reactions are accelerated.

The beneficial properties of melt water are improved due to the removal of deuterium, a heavy isotope, during the freezing process. Deuterium is present in large quantities in tap water. Its presence negatively affects the cells of the body, causing them significant harm. Even a small amount of deuterium removed from water helps to heal the body, free up energy reserves, and stimulate all life processes.

The main advantage of drinking melt water is its purity. It is completely free of chlorides, salts, isotopic molecules, and other dangerous substances and compounds.

Rules for using melt water

Daily intake of 500-700 grams of such water helps to gain a boost of energy and improve well-being. It is recommended to drink the first dose of melt water in the morning on an empty stomach, an hour before meals. During the day, drink the rest half an hour before meals three times a day.

Water must be drunk immediately after defrosting so that its temperature does not exceed 10 degrees. If for some reason you cannot drink cold water, do not let it heat above 30 degrees.

How to properly prepare melt water at home

Melt water is not just defrosted water or defrosted ice. By the way, snow and ice taken from the street or in the refrigerator and then thawed are not melt water. Rather, such a composition can be called a bacterial bomb. Natural snow or ice contains a lot of dirt and harmful impurities. Snow coats in the refrigerator may also contain refrigerants and other hazardous substances, as well as have an unpleasant odor.

Making the right melt water at home is not at all difficult. The container for freezing should not be glass, in order to avoid damage, even splitting, due to the increase in the volume of water during the freezing process. Metal utensils are also not suitable. The effect of its interaction with water will be low. A plastic box or other plastic container with a wide mouth is best for freezing.

Pour filtered water or tap water that has been standing for several hours into the prepared container. It is better to take a container of 1 liter. It is convenient to freeze and freezing occurs faster. You can prepare several containers at once.
Close the lid and place it (to prevent the container from freezing to the bottom of the freezer) on a cardboard stand in the freezer.
After 1.5 hours the first crust of ice forms. This is deuterium that must be removed. Remove the ice crust and continue freezing.
After about six hours, the water in the container will freeze to two-thirds of its volume. We carefully drain the unfrozen water inside the ice, breaking the ice - this is the so-called light water. It contains all the remaining harmful chemical compounds.

The ice remaining in the container melts naturally at room temperature, without forced heating.

Fresh melt water can be drunk as it melts.

The healing and healing properties of melt water are not lost for 8 hours from the moment of defrosting.

Is there any harm from melt water?

The benefits of drinking melt water are obvious, but it can cause harm to the body only if the cooking technology at home is violated and if it is used incorrectly. If you are prohibited from drinking cold drinks, be careful when taking it, start drinking, gradually lowering the temperature.

Also, you should not switch to drinking exclusively melt water. The body must gradually adapt to liquids without harmful impurities, additives, minerals, and salts.

It is better to start taking it with 100 ml per day, gradually increasing the volume to 500-700 ml.

You should also understand that melt water is not a medicine! When starting to drink it, it is not permissible to refuse prescribed medications. The healing properties of water serve as an excellent cleansing and prophylactic agent for the body. During the treatment process, drinking melt water increases the effectiveness of medications and promotes a speedy recovery.

I suggest you watch a very interesting video about an alternative method of extracting melt water, invented by Dr. Toropov:

Water is an essential component of all biochemical processes in our body. After all, a person is 70% water, 92% of water is in the blood, and 8% of water is in the human brain. Scientists have found that a person should drink at least 2.5 liters of water per day. And with high brain activity, you need to increase the daily intake to 4 liters. It is interesting to know that thirst occurs when the body loses 2% of body weight in water (on average 1.5 liters). With a loss of 6-8% of body weight, you can faint, and a loss of 10% can be fatal. As you can see, without water the human body cannot function. Water consumed as food is not only a chemical element, but also impurities containing beneficial microelements and bacteria. Water quality directly affects our health. In urban conditions, when preparing food, we encounter tap water everywhere. The chemical structure of such water, of course, is lost at treatment plants, when passing through pipes, at iron removal plants, etc. Melt water will be very useful in structure for our body. But not everyone knows how to get melt water at home. This can be done without much effort. Let's look at how melt water is obtained and what are the benefits of melt water for the body.

Meltwater comes from the natural process of ice or snow melting as temperatures increase. Obtaining useful melt water involves purification from deuterium (a heavy isotope of hydrogen). This “heavy water” reduces the rate of energy metabolism that occurs in the cells of our body. A decrease in metabolic processes leads to physical weakness, deterioration of vitality, and premature aging. Also, when receiving living water, it is purified from pesticides, bacteria, and heavy metal salts.

The benefits of melt water for the body

Before we talk about how to get melt water at home, let’s talk about the benefits of melt water for the body. It has found its application in a wide range of different diseases.

Slows down the aging process. In old age, there is usually a decrease in the amount of water in the cells of the body. Melt water prevents this.
Rejuvenates the body. The structure of melt water is identical to the structure of the cells of our body. Thus, it facilitates the functioning of the cardiovascular system, nervous system, and other internal organs. Normalizes muscles, improves overall well-being. A particular effect is noticeable in people over 40 years of age.
Gives extra energy. Melt water increases the body's resistance to viral infections and cancer. It also reduces fatigue and significantly stimulates life processes. Even your sleep becomes stronger.
Accelerates metabolic processes and recovery processes. Melt water helps restore the immune system. Increases the healing process after surgery. Restores the body after physical and mental stress. The effectiveness of medications taken against melt water increases dramatically.
Increases alertness and performance. Brain activity improves in people who engage in mental work. And productivity for manual workers. Melt water is especially useful for schoolchildren, thanks to which they become more attentive in class and learn the material better.
Used in the treatment of skin diseases with a strong allergic component. Such diseases include psoriasis, dermatitis, toxicoderma, erythroderma, etc. 5 days after drinking living water, irritation decreases, skin itching is significantly reduced or completely disappears. The disease process proceeds faster in the fixed stage.
Normalizes the tone of the bronchial muscles, reduces the sensitivity of the mucous membrane. The use of fresh melt water for inhalation of inflamed lungs in children led to the elimination of wheezing and normalization of blood tests, temperature and respiratory functions.
Cosmetic properties. Cosmetologists recommend periodically washing your face with melt water. It stimulates the skin's metabolic processes, improves complexion, rejuvenating and refreshing it.
Helps with weight loss. Since melt water charges the body with energy and stamina, accelerates metabolic processes, the effectiveness of weight loss diets increases. This removes toxins and other harmful substances.

It is obvious that the benefits of melt water for the body are great and it has many beneficial properties. However, you will not be able to feel this on your body immediately, but after a certain time of its use. Moreover, it has beneficial properties only for 12 hours.

How to get melt water at home

The general principle of how to obtain melt water at home is to freeze the water and drain the remaining unfrozen water (heavy water). Since pure water freezes first, and water with impurities second. Then the ice is thawed. It is not difficult to obtain melt water at home; for this you need purified water (tap water will do) and a freezer. Let's look at several popular recipes for preparing melt water for internal use.

Recipe No. 1

Cold tap water is poured into a half-liter jar and closed with a plastic lid. The jar is placed in the freezer and something is placed under it to thermally insulate the bottom (for example, cardboard). Please note that about half the volume of water in the jar should freeze. This will give you half a can of water and half a can of ice. We drain the water, as it contains impurities and salts. Ice containing pure, free water must be thawed and consumed within 12 hours. This method is the simplest and fastest. The freezing time of half the volume of water in a half-liter jar has been established experimentally: from 8 to 12 hours. To obtain more purified melt water, you can use additional purification of tap water. You should filter tap water through any existing filter and then freeze it. The first thin layer of ice is removed, as it will contain harmful impurities.

Recipe No. 2

A more complex recipe for melt water is as follows: filtered or regular tap water is poured into an enamel bowl. The water is frozen in the freezer for about 4-5 hours. The walls of the dish and the surface of the water will become covered with ice. Unfrozen water is poured into another container. The ice that remains contains heavy water molecules, which freeze first. This first ice, containing heavy hydrogen, is discarded. The dishes with water are placed back in the freezer. When two-thirds of the water in the dish freezes, the unfrozen water is drained and the remaining ice is melted. Melt water is ready!

Recipe No. 3

Tap water is heated to a temperature of 94-96˚C, that is, until small bubbles appear. After this, the water is quickly cooled, for example, by pouring it into larger containers. The water is then frozen and thawed using standard methods. According to the author of this method, water thus passes through all phases of the natural cycle - evaporates, cools, freezes and thaws. The name of the resulting water is degassed, that is, free of gases.

Recipe for external use

Melt water is used not only for internal use, but also for external use. There is a recipe for preparing such water, the so-called “talitsa”.

Rock salt, which contains all the necessary vital microelements, and a little vinegar are added to the melt water obtained by any of the methods described above. This solution is rubbed into the skin with massaging movements. This makes the skin on the face and body elastic, soft and tender. Such rubbing also has a positive effect on the organs, just like after drinking melt water internally.

The proportions for preparing “Talitsa” are as follows: add 1 teaspoon of salt (preferably sea) and 1 teaspoon of vinegar (preferably apple) to the prepared melt water (300 ml).

“Talitsa” is also used in the treatment of diseases of teeth, gums, periodontitis and angina pectoris. External use of "talitsa" helps to increase overall vitality.

snow or ice from the street cannot be used to prepare melt water, as they contain many harmful substances;
It is strictly forbidden to melt ice taken from the walls of the freezer, as it contains hazardous substances and refrigerants;
Glassware may break because the volume of water expands when frozen. It is better to use plastic containers for freezing, preferably from drinking water;
metal dishes are not the best option for freezing water;
Thawing of ice should occur in a tightly closed container at room temperature;
In order to maximize the benefits of melt water for the body, for medicinal purposes it is taken half an hour before meals, about 4-5 times a day, for one and a half to one month. The amount of melt water consumed should be 1% of body weight;
It is better to try not to drink melt water on an empty stomach.

Melt water is not distilled water, completely devoid of useful substances. This is pure water, which is 80-90% purified from impurities, including heavy isotopes. It is suitable for use at any age, as it does not have any contraindications or side effects. And now that you know the benefits of melt water for the body and how to get melt water at home, you can discover a new source of health!

Water is the most powerful carrier of information that can exist in the world. It has a certain molecular structure on which the quality of water depends. From this we can say that the information that water carries with it, as well as its structure, influence its properties.

The benefits of melt water.
Water itself does not provide any nutritional value to the body, but it is an essential component of all biochemical processes occurring in living organisms, in particular in the human body. Naturally, the purity of the water affects the efficiency of these processes. The consumption of melt water provides exceptional benefits for the human body, since the regular ordered structure of ice is similar to the ordered structure of the cell membranes of our body, which is why it is easily absorbed. In its chemical and energy composition, it is as close as possible to natural clean water.

Under natural conditions, water seems to absorb information from everything it comes into contact with during the flow. That is why spring water and water from forest streams are considered the cleanest and healthiest, because it has undergone natural filtration with the help of pebbles, all kinds of snags, and silt that are found along the way. This water has a healing effect on humans, as it has the ability to heal and energize. It is considered a good folk remedy for increasing the physical activity of the body, especially after winter. Residents of rural areas have long noticed that animals willingly drink this water during the period of snow melting from the fields, and domestic animals drink from puddles of melt water, and in the fields where this water accumulates, a rich harvest awaits. Even agronomists these days carry out snow retention for these purposes.

What can we say about the water we get from a water pipe? After all, before it reaches us, it is purified with various chemicals, chlorinated, and then released into the water supply, where it continues its journey through hundreds of thousands of pipes, absorbing the energy of thousands of homes. In this case, the pipes can be located at right angles, but this destroys the structure of the water. As a result, we get water that is not only enriched with chlorine and other chemical compounds, but also energetically dirty.

After freezing, water again restores its original structural, informational and energetic state, which is a benefit for our body. In addition, after thawing, many crystallization centers are formed in such water, which, when absorbed into the desired zone in the body, trigger a chain reaction of restoration of vital functions. The main difference between melt water and at the same time its property is its purity. That is why the most valuable and useful water in the world is considered to be water from Arctic ice. In its structure, melt water is identical to the liquid that makes up the blood.

The exceptional properties of melt water are explained by the fact that, compared to ordinary tap water, there are practically no impurities in it, including isotopic molecules in which the hydrogen atom replaces the heavier isotope - deuterium. This element has a detrimental effect on all living things and causes significant harm to the body. Its absorption by the body is very difficult, which requires the expenditure of additional energy. A high concentration of this element is comparable to the effect of a strong poison. Melt water gives a person a good energy boost.

It has been proven that people who regularly drink melt water live much longer than those who drink regular water. Here we are talking about residents of mountainous regions who drink melt water from glacial rivers. This miracle water triggers the body’s self-rejuvenation processes. It significantly accelerates regeneration processes in the body. Its use has a positive effect on the functioning of internal organs, metabolism, and helps strengthen the immune system. Thanks to the activation of metabolic processes, destroyed cells begin to be eliminated from the body, interfering with the process of formation of new ones. As a result, the aging process of the body slows down.

Drinking melt water has a positive effect on the cardiovascular system and brain, which has been scientifically proven. That is why it is recommended for use by people suffering from hypertension, atherosclerosis, and ischemia. Such water will bring no less benefit to people who have suffered heart attacks and strokes. Water will trigger a recovery mechanism at the cellular level, which will improve the course of the disease and speed up recovery. If you drink just a couple of glasses of this healing liquid daily, you will experience a significant improvement in your health and well-being. The functioning of the heart, blood vessels of the brain and spinal cord is normalized, the composition of the blood, as well as muscle function, is significantly improved. It also helps reduce the level of bad cholesterol in the blood. This water is especially useful when treating hunger and during fasting days, since it facilitates the process of removing toxins from the body.

By the way, those who have problems with excess weight are also recommended to drink melt water. When consumed, the processes of fat mass reduction are activated. The extra pounds will go away painlessly, you just need to drink more of this water than your body needs. As a result of this, the body will begin to urgently remove excess water, but half of fat consists of water. Here's some simple arithmetic for you.

You should only consult your doctor before drinking melt water, as it is not recommended for people with kidney problems.

This miracle liquid, when consumed regularly, increases the body's resistance to stress, reduces fatigue, filling it with much-needed energy. Melt water also has positive properties for the child’s body. It also provides additional energy boost to a child of any age, which makes it easier for them to cope with the curriculum.

Treatment with melt water helps improve the general condition of the body. It has been noticed that the effect of taking medications is much higher if you take them with melt water.

When treating bronchopulmonary diseases, the effectiveness of treatment will significantly increase if inhalations are done using melt water. The recovery period is reduced (by two to seven days), the temperature returns to normal, cough, wet and dry wheezing disappear. The body's immunity to viruses and bacteria increases, and the condition of the mucous membranes improves. When treating allergic skin diseases (eczema, psoriasis, neurodermatitis, etc.) with a structured liquid, on the third to fifth day of use there is a decrease in hyperthermia, weakening or complete disappearance of itching. As a result, the acute disease enters a regressive stage.

Preparation of melt water at home.
Many people believe that melt water can be obtained by quickly freezing it in the refrigerator and then thawing it. But this is far from true. So, to prepare “living” water you need clean drinking water. Tap water, purified by a filter, or boiled water are not suitable, since they have a changed structure, impurities, and boiled water is generally “dead.” Therefore, we take water from a spring, if possible. If this is not possible, we buy it in the store. Preference should be given to the water that is produced in your region; it will be the most useful, since its composition is closest to the water in your body.

Then you should select a container in which, in fact, you will freeze the water. Since water expands when frozen, this requires “elastic” dishes. Metal pans (especially aluminum and iron), except for silver ones, cannot be used, since water in contact with iron and aluminum loses some of its properties. A two-liter plastic or nylon bucket is ideal for this purpose. It should be washed thoroughly and doused with boiling water. After this, pour drinking water, close the lid (to avoid germs, debris and dust) and place in the freezer.

Since everyone’s freezers work differently, you should determine approximately how long it will take for your water to freeze to such a state that an unfrozen cavity the size of a man’s fist remains in the center of the bucket. Heavy metal salts and various contaminants accumulate in this cavity, but they do not freeze. Therefore, as soon as such a cavity has formed, it is necessary to remove the ice bucket from the freezer, use a knife to split the ice in half and drain all the crap from the core.

After this, you need to wait until the water melts, then pour it back into the bucket and freeze it. In general, to prepare “correct” melt water, the water should be frozen three times, only then will it regain its natural structure and energy.

After the third freezing, we take the ice out of the refrigerator and break it into pieces, which we put in a glass jar. Since glass is a neutral material, it is ideal for storing melt water.

It is not worth preparing a large amount of water at once, since its benefits and effectiveness remain for four to five hours after thawing. Therefore, it is worth calculating the volume you need so that there is no excess left.

There are no contraindications to the use of melt water, therefore, there are no side effects either. After all, this is pure water, purified by almost 90% of impurities.

Drinking melt water.
Drinking melt water is recommended in the amount of two glasses per day every day. Drink the first glass in the morning an hour before meals, the second at lunch, also an hour before meals. According to many experts, it is better to drink water with the addition of pieces of ice. This is especially useful for people who want to lose weight, because the body will spend additional energy on warming the water.

Melt water should be drunk without any additives. Under no circumstances should this water be heated. It should thaw naturally at room temperature. You should drink water immediately after defrosting in small sips, holding them in your mouth.

For medicinal purposes, structured water is taken thirty minutes before meals, 4-5 times daily for 30-40 days. During the day, the required amount of water is a percentage of body weight.
That is, with a weight of 70 kg, this volume will be 700 g. During the course, you should gradually reduce the dose of water so that by the end the volume is reduced by half.

For preventive purposes, the water norm will be 2 times less (0.5% of body weight).

The technique for producing melt water involves different freezing rates of pure water and water containing impurities. It has been experimentally established that, as ice slowly freezes, it intensively captures impurities at the beginning and end of freezing. Therefore, when receiving ice, you need to discard the first pieces of ice that have formed, and then, after freezing the main part of the water, drain the unfrozen remains.

Fresh melt water can be obtained at home. But for this you need to adhere to some general rules.

Melt water is prepared from pre-purified drinking water, which is poured into clean, flat vessels to 85% of their volume.

The container for preparing melt water is tightly closed and placed in freezers until completely frozen.

You should not fill a full container with water, because if it is glass, it may break; it is better to use a plastic container marked “for drinking water.”

Ice is defrosted at room temperature in the same closed containers, immediately before use.

Frozen vessels can be taken out of the freezer before going to bed, and in the morning the required amount of such water will be obtained.

There are several ways to obtain fresh melt water. Due to the fact that the data available on the Internet on the preparation of melt water is incomplete and contradictory, below are the most detailed methods and instructions for obtaining melt water at home.

Method No. 1.
The method of one of the active popularizers of the use of melt water A.D. Labzy: Pour cold tap water into a one and a half liter jar, not reaching the top. Cover the jar with a plastic lid and place it in the freezer compartment of the refrigerator on a cardboard lining (to insulate the bottom). Note the freezing time for about half the jar. By selecting its volume, it is not difficult to ensure that it equals 10-12 hours; then you need to repeat the freezing cycle only twice a day to provide yourself with a daily supply of melt water. The result is a two-component system consisting of ice (essentially pure frozen water without impurities) and an aqueous non-freezing brine under the ice containing salts and impurities that are removed. In this case, the entire water brine is drained into the sink, and the ice is defrosted and used for drinking, making tea, coffee and other food items.
This is the simplest and most convenient method of preparing melt water at home. Water not only acquires a characteristic structure, but is also perfectly purified from many salts and impurities. Cold water is kept in the freezer (and in winter - on the balcony) until about half of it freezes. Unfrozen water remains in the middle of the volume, which is poured out. The ice is left to melt. The main thing in this method is to experimentally find the time required to freeze half the volume. It could be 8, 10, or 12 hours. The idea is that pure water freezes first, leaving most of the impurities in solution. Consider sea ice, which consists of almost fresh water, although it forms on the surface of a salty sea. And if there is no household filter, then all water for drinking and household needs can be subjected to such purification. For greater effect, you can use double water purification. To do this, you first need to filter tap water through any available filter and then freeze it. Then, when a thin first layer of ice forms, it is removed, because it contains some harmful fast-freezing heavy compounds. Then the water is re-frozen to half the volume and the unfrozen fraction of water is removed. The result is very clean water. Promoter of the method, A.D. It was in this way that Labza, by refusing ordinary tap water, cured himself of a serious illness. In 1966, he had a kidney removed, and in 1984 he could hardly move as a result of atherosclerosis of the brain and heart. I started treatment with purified melt water, and the results exceeded all expectations.

Method No. 2.
A more complex method of preparing melt water is described by A. Malovichko, where melt water is called protium water. The method is as follows: An enamel pan with filtered or regular tap water needs to be placed in the freezer of the refrigerator. After 4-5 hours, you need to take it out. The surface of the water and the walls of the pan are already covered with the first ice. Pour this water into another pan. The ice that remains in an empty pan contains molecules of heavy water, which freezes earlier than ordinary water, at +3.8 0C. This first ice, containing deuterium, is thrown away. And we put the pan with water back in the freezer. When the water in it freezes by two-thirds, we drain the unfrozen water - this is “light” water, it contains all the chemicals and harmful impurities. And the ice that remains in the pan is protium water, which is necessary for the human body. It is 80% purified from impurities and heavy water and contains 15 mg of calcium per liter of liquid. You need to melt this ice at room temperature and drink this water throughout the day.

Method No. 3
Degassed water (method of the Zelepukhin brothers) is another way to prepare biologically active melt water. To do this, a small amount of tap water is brought to a temperature of 94-96 0C, that is, to the point of the so-called “white key”, when small bubbles appear in the water in abundance, but the formation of large ones has not yet begun. After this, the bowl of water is removed from the stove and quickly cooled, for example, by placing it in a larger vessel or in a bath of cold water. Then the water is frozen and thawed according to standard methods. According to the authors, such water goes through all phases of its cycle in nature - evaporates, cools, freezes and thaws. In addition, such water has a lower content of gases. Therefore, it is especially useful because it has a natural structure.
It should be emphasized, however, that degassed water, which has a large supply of energy, can be obtained not only by freezing. The most active (5-6 times more than usual and 2-3 times more than melted water) is boiled and quickly cooled water under conditions that exclude access to atmospheric air. In this case, according to the laws of physics, it degasses and does not have time to become saturated with gases again.

Method No. 4
Another method for preparing melt water was proposed by Yu.A. Andreev, author of the book “Three Pillars of Health.” He proposed combining the two previous methods, that is, subjecting the melt water to degassing and then freezing it again. “The test showed,” he writes, “that such water has no price. This is truly healing water, and if anyone has any disorders in the gastrointestinal tract, it is a cure for him.”

Method No. 5
There is another new method for producing melt water, developed by engineer M. M. Muratov. He designed an installation that makes it possible to obtain light water of a given salt composition with a reduced content of heavy water in it at home using the method of uniform freezing. It is known that natural water is a heterogeneous substance in its isotopic composition. In addition to light (protium) water molecules - H2 16O, consisting of two hydrogen (protium) atoms and one oxygen-16 atom, natural water also contains heavy water molecules, and there are 7 stable (consisting only of stable atoms) isotope modifications of water . The total amount of heavy isotopes in natural water is approximately 0.272%. In water from freshwater sources, the content of heavy water is usually about 330 mg/l (calculated per HDO molecule), and heavy oxygen (H2 18O) is about 2 g/l. This is comparable to or even exceeds the permissible salt content in drinking water. A sharply negative effect of heavy water on living organisms has been revealed, necessitating the removal of heavy water from drinking water. (Report by A.A. Timakov “Main effects of light water” at the 8th All-Russian scientific conference on the topic “Physical and chemical processes in the selection of atoms and molecules” November 6 - 10, 2003) The article in the Komsomol aroused the interest of engineer M.M. . Muratov and deciding to test the properties of this water, from November 2006 he began to “lighten” water for cooking and drinking by uniform freezing.
According to the method of M.M. Murat's water was aerated and cooled with the formation of a water flow circulating in the container until small ice crystals formed. Then it was filtered. Less than 2% of ice containing heavy water remained on the filter.
According to the author of this method, 6 months of drinking light water showed: When consumed in food and drink in the amount of 2.5-3 liters per day, there was a significant improvement in well-being on the 5th day of use. This was reflected in the fact that drowsiness and chronic fatigue disappeared, the “heaviness” in the legs disappeared, and seasonal allergic manifestations decreased without the use of medications. In 10 days, vision improved noticeably by about 0.5 diopters. A month later, the pain in the knee joint disappeared. After 4 months, the symptoms of chronic pancreatitis disappeared and minor pain in the liver area disappeared. Within 6 months, the pain associated with coronary artery disease and pain in the back and lumbar region disappeared. 1 viral infection passed in a very mild form, “on my feet”. The manifestations of varicose veins have decreased. There was also a noticeable improvement in the taste of both water and products prepared using treated water. The latter fact was confirmed by a tasting commission of an industrial enterprise, and is clearly visible to ordinary water consumers.

Method No. 6 - "table"
There are also recipes for external use of melt water. A healthy lifestyle enthusiast, people's inventor V. Mamontov, knowing about the special properties of melt water, invented a method of massage with melt water - “talitsa”. He added rock salt, which contains all the vital microelements, and a little vinegar to the melt water, and used this solution for massage rubbing into the skin. And the “miracles” began. Here is how he writes about it: “After several rubbings, the heart, which constantly reminded itself of tingling, shooting, sharp pains, stopped bothering me, the functioning of the stomach improved, and sleep returned to normal. The veins that had previously protruded like ropes and cords on the legs and arms began to disappear. After normalization of metabolism, the vessels located close to the skin began to recover. The skin itself on the face and body became elastic, soft, tender, acquired a vibrant, natural color, and wrinkles were noticeably smoothed out. My feet got warm, old periodontal disease disappeared in a few days, my gums stopped bleeding.”
The “talitsa” solution is prepared as follows: dilute 1 teaspoon in 300 ml of melt water. a spoonful of rock salt (preferably unrefined sea salt) and 1 teaspoon. a spoonful of table vinegar (preferably apple or other fruit vinegar).
For oral baths (for sore throats, diseases of the teeth, gums, periodontitis), the “talitsa” should be kept in the mouth for 10-15 minutes, carrying out several procedures a day for 7-10 days.
Water and massage procedures using “talitsa” can be diversified by replacing ordinary water with “talitsa” in various water procedures. Procedures with “talitsa” are publicly available, do not require special equipment or preparation, have no contraindications, and give the body a general tone.

How to properly prepare and use melt water?

Which method of obtaining melt water should you use, decide for yourself, dear readers. Below are useful tips and recommendations on how to properly prepare and use melt water.

To prepare melt water, you should not use natural ice or snow, since they are usually contaminated and contain many harmful substances.

To freeze water, it is better to use plastic jars designed for storing drinking water. Glass containers can break because water expands and increases in volume when it freezes.

You should not freeze water in a metal container, as this significantly reduces its effectiveness.

Under no circumstances should you obtain melt water by melting a snow coat in the freezer, because... This ice may contain harmful substances and refrigerants and may also have an unpleasant odor.

Melt water retains its healing properties for 7-8 hours after defrosting snow or ice.

If you want to drink warm melt water, remember that it cannot be heated above 37 degrees.

Nothing should be added to fresh melt water.

It is better to drink melt water on an empty stomach in the morning, afternoon and evening before meals and for 1 hour after that do not eat or drink anything.

For medicinal purposes, fresh melt water should be taken half an hour before meals every day 4-5 times for 30-40 days. It should be drunk in an amount of 1 percent of body weight per day.

The nominal rate of melt water is 3/4 cup 2-3 times a day at the rate of 4-6 ml of water per 1 kg of weight. An unstable but noticeable effect can be observed even from 3/4 glass 1 time in the morning on an empty stomach (2 ml per 1 kg of weight).

If your body weight is 50 kilograms, then you should drink 500 grams of fresh melt water every day. Then the dose is gradually reduced to half the specified dose. For preventive purposes, fresh melt water should be taken in half the dose.

Melt water has no contraindications or side effects.

In conclusion, it should be emphasized that in our age of “scientific and technological progress”, humanity has reached the point where almost no food product can do without artificial colors, sweeteners, flavoring additives and genetic modifiers. It is not surprising that the number of people suffering from diseases of the gastrointestinal tract is constantly increasing in the world. Water, in fact, remains the only natural element on the basis of which it is possible to build a system of human health through food, but it also loses its structure in the process of purification at water treatment plants, heating and passing through pipes. In this regard, preparing melt water at home is the cheapest and most effective method of water purification.
Ph.D. O.V. Mosin - IA "WaterMarket.ru - Electronic market of drinking water and soft drinks", 12-11-2008

For all women who care about their health and slim figure, it will be useful to learn about the properties of melt water, how to prepare melt water at home, and how you can use melt water for weight loss.

Properties of melt water

The phrase “melt water” does not hide any homeopathic secrets: when a piece of ice or a mountain of snow melts under the influence of heat, a puddle of melt water remains in its place. Meltwater remains after the melting of icebergs and ice shelves over the oceans. Melt water is often found in the zone where glaciers are washed away, where the level of their snow cover decreases. In addition, melt water can result from volcanic eruptions.

And it turns out that drinking this water is much healthier than ordinary water.

The main beneficial property of melt water is that it does not contain harmful impurities that are added, for example, to tap water for its purification, and its molecular structure is particularly ordered, which makes it a source of additional energy reserves.

Another useful property of melt water is that it accelerates metabolic processes in the human body. This is achieved due to the size of the melt water molecule: it is smaller than the ordinary water molecule, making it easier to penetrate the cell membrane. Unlike melt water, tap water, which we, of course, do not drink in its pure form, but still use for cooking, consists of molecules of different types, many of which are of a size that does not allow them to pass freely through cell membranes. Consequently, these molecules do not participate in metabolism. Therefore, when following a water diet, it is often not simple water that is used, but melt water.

The benefits of melt water

Due to the peculiarities of its molecular structure, melt water has certain health benefits for the body of any age. The benefit of melt water is primarily that its use helps the body fight the aging process. In the human body, the process of cell replacement does not stop for a second. At the same time, old, outdated cells prevent the formation of new ones. The benefit of melt water is that due to the metabolism it accelerates, dead cells leave the body faster, and young ones come to replace them.

This process causes the immune system to be strengthened and the functioning of all organs to improve. Another benefit of melt water is that it can significantly reduce cholesterol levels in the blood. Regular consumption of melt water has a beneficial effect on brain activity and performance. Melt water has a positive effect on the recovery processes in the body; with its help, you can cope with the symptoms of allergic and dermatological diseases. And of course, drinking melt water has a beneficial effect on digestion, which means the benefit of melt water is that it can be used to fight extra pounds. But more on this below.

How to prepare melt water at home

There are several ways to prepare melt water at home. The most common one is as follows. You need to fill a liter container with ordinary water (it is better to choose plastic containers for this, since glass ones can crack in the freezer) and put it in the freezer. After turning the water into a piece of ice, the container must be removed from the freezer so that the ice cube thaws. The most common is not always the most effective, and this method is just such a case. The melt water that we obtained in this way is not completely purified from harmful impurities.

Another way to prepare melt water at home: the container filled with water must be placed back in the freezer, but there is no need to wait until the entire volume of water turns into ice. Freeze until the first ice crust forms. This ice needs to be separated and liquidated; it contains the bulk of harmful impurities, including deuterium. The water that remains in the container should be kept in the freezer until most of it turns into ice.

Now you need to get rid of unfrozen water, which also contains impurities, but of a different kind. The remaining ice, when melted, will give us clean melt water that can be consumed. It should be borne in mind that to prepare melt water you use tap water; it must sit for several hours so that dissolved gases leave it.

If you are planning to prepare melt water at home, you need to learn a number of things. Firstly, it is better to put water in the freezer in plastic containers. Metal utensils will interact with water, reducing its effectiveness, and glass may burst due to low temperatures.

Secondly, when you get melt water at home, use it in its pure form, do not add any flavoring additives to it.

Thirdly, unfortunately, you cannot prepare anything from such water, because when melt water is heated above 37 degrees, it loses its beneficial properties. It's best to just use it for drinking. Fourthly, it is obvious that melt water must be stored in a container with a tightly screwed lid, otherwise the water will absorb foreign odors. Finally, when you defrost ice, don't try to speed up the process by heating it, you're not helping the melting water, you're just making it worse.

Melt water for weight loss

The idea of using melt water for weight loss is based on its properties, which speed up metabolism. The methods may be different, but they all, in one way or another, repeat the same advice - periodically drinking melt water throughout the day. For example, drink a glass of melt water before each meal.

Some experts on the use of melt water for weight loss recommend drinking one glass in the morning on an empty stomach, and in the afternoon and evening before meals, after which do not consume either water or food for an hour.

Remember that it is best to use melt water for weight loss that has just been thawed. It is at this moment that its beneficial properties are at their maximum.