How to make an aviary for two dogs. Do-it-yourself outdoor enclosure for a dog: materials, sizes, diagrams. Making dog enclosures with your own hands: photos of designs designed for a pack

Building a stylish and original enclosure for a dog with your own hands is not astrophysics or higher mathematics. Everything is much simpler. First you need to determine its shape and dimensions. Make a drawing taking into account all dimensions and wishes. It is important to choose quality material. You should also consider where best to place it.

Often, owners need such a platform to isolate their tailed guardian from guests, household chores or garden plantings.
Of course, sometimes a dog enclosure is made into an apartment. The reason for this is the breed of the pet. It may be either too large or aggressive.
For safety reasons, it should be kept separately.

For an apartment, a booth can be made from old bedside tables (cabinets) or you can use special cages or mesh fences.

Location

Creating comfortable conditions for both the animal and household members is the leading goal of this idea. It is not recommended to build a fenced area for your vocal guard:

1. Near the fence, gates and gates. All passers-by, as well as cars, will irritate him. As a result, the dog’s morning or night serenades for the family are guaranteed. In addition, there is a possibility that he will get out and do a lot of dirty tricks.
2. In the backyard. Four-legged friends have a herd instinct. If you completely isolate them, they will become sad and begin to howl and whine, and this gets on your nerves.
3. Near the door of the house. The unpleasant smell and barking of the pet will make life unbearable for the family.

The optimal location for outdoor dog enclosures is the front area of ​​the yard. It is better to place it under a branchy tree. The roof, of course, will hide the cute animal from the heat, as well as rain. However, hot iron will create a real steam room in the building. While the dense crown will be an excellent shelter from the sun.

It is necessary to place the enclosure longer from drafts. Nobody wants their pet to get sick.

Features of construction

The foundation of such a structure is mainly concreted and covered with crushed stone. The back and side walls are made blank. The other three are made of gratings, rods or meshes. There must be a gate with a shutter so that you can feed the dog and wash the area. In the middle, 2 places are installed: one for overnight stay (kennel), and the other for food (feeder). In order for your four-legged companion to feel safe and comfortable, the following requirements are imposed on do-it-yourself dog enclosures:

Since it is sometimes necessary to make an enclosure for a dog in an apartment, you can use improvised materials. For example, make a fence from slats or mesh. At the same time, attach it to one of the walls of the apartment. Much depends on the wishes of the household members themselves.

Animals need to be walked from time to time. They should run and frolic. Otherwise, the muscles atrophy and the blood stagnates.

Material selection

It is recommended to make one or two sides of the site completely closed so that there are no drafts. To build such blank walls, you can use the following types of building materials:

• brick;
• foam or cinder blocks:
• wooden beams, panels or boards (thickness from 2 cm);
• concrete slab;
• finished frame made of wood and reinforcement.

Thermal insulation material is coniferous trees. For harsh winters, it is still better to insulate the walls or make them double.

Floor

The flooring in an outdoor dog enclosure should not be cold. This can cause rheumatism in the animal. Therefore, it cannot be made from cement. It is better to use asphalt or concrete. Cover the screed with wooden flooring. The tongue and groove boards are sanded and dried well to prevent mold from developing. Before painting, they should be treated with antiseptic agents. The floor must be sloping. The side zones are slightly higher, and the front and center zones are lower. As a result, water will drain rather than accumulate on the surface.

Any wooden parts should not come into contact with the ground or other base elements. Otherwise, the wood will absorb moisture and rot.

Roof

In the original, the coating should be made inclined or flat. It is forbidden to use ordinary nails to install the roof. It is better to give preference to self-tapping screws or other types of closed fastenings, because the dog can get hurt. The roof of a home enclosure for a dog can be made from:

It is mounted on a wooden platform, which consists of several boards. This structure allows for heat retention in the building and excellent air circulation.

Front end

The front wall provides the tailed guard with a good overview. The grid is an incomparable option for such observation. It can be made from metal profile pipes with a round or square cross-section. Using a grinder or sandpaper, you need to clean the parts from burrs and rust. The metal surface must be primed and covered with several layers of paint.

The Ministry of Health prohibits the use of powder and galvanized materials. They are harmful to the health of the animal. It is recommended to use screws made of stainless material as fastenings.

The mesh is a budget option, but it is not always reliable. Under the weight of the shepherd, it may fall out or rupture. Dogs also often chew the wire and pull out their teeth.

Design

After determining the location, it is important to make a detailed drawing with the dimensions of the dog’s enclosure. You need to think through and correctly position the main zones:

• booth;
• platform;
• gate;
• area (lawn) for walking;
• feeding windows.

The optimal height of such a structure is calculated taking into account the dimensions of the pet. It is necessary to take measurements of the animal in full height.
To do this, he must stand on his hind legs. It is worth adding from 20 to 50 cm to the resulting indicator, at the discretion of the designer.

If the site is being prepared for several dogs, then all dimensions must be multiplied by 1.5.

Construction

After receiving the project, you should select the material for the roof, blind and front walls. Then it is important to decide on the location.
Now you need to consider step by step how to build an enclosure for a dog with your own hands, so as not to miss anything.

Foundation and decking

The rafters for the foundation will be powerful pipes (4-6 pieces), which should be driven into the ground along the perimeter of the object, or columns of bricks. The remaining space is filled with gravel or expanded clay. The base (screed height from 40 to 70 mm) is poured with a solution of concrete or cement. It is important not to forget to tilt towards the frontal zone.

The wooden flooring is nailed to a special timber frame. Its dimensions correspond to the dimensions of the enclosure. This floor is made from tongue and groove boards because they do not require nails for installation.

Construction and filling of the frame

If the fence is metal, then pipes can be used. They are assembled according to the drawing and fastened using bolts or welding. The same assembly principle applies to wooden supports. The algorithm for their construction is as follows:

The metal frame is filled with pre-selected material: a wooden beam or a brick wall. To insulate the back part, pressed sawdust, polystyrene foam, eco- or mineral wool are additionally used.

The front wall is made with one transverse crossbar. If you use a mesh, you need to make sure that it sits firmly on the folds. Any load can break it.

The front wall must be made of chain-link or mesh. In other cases, a grate is made, consisting of welded pipes and rods. Near the gate, two rings intended for feeding should be welded. The turning mechanism opens outwards.

Installation of roof and booth

To work with corrugated sheets or slate, it is necessary to build a wooden frame. Then the roofing sheets are applied one after another. A wooden frame is sheathed with roofing felt or soft tiles, onto which special OSB boards are attached. For safety reasons, you should use self-tapping screws or a closed type of fastening.
Among other things, an awning can be used as a cover. Dense and waterproof fabric is pulled over a metal frame, secured with loops.

The booth is made with a flat roof. As a result, it will become an observation deck for the pet. It is desirable that the structure opens, because then it is easier to clean it. The size of the booth is equal to the length of the lying dog with its paws stretched out.

A few simple steps and your do-it-yourself dog enclosure is ready. This stylish residence will serve as a wonderful place to relax and work for your beloved pet.

Video of building a dog enclosure

(18 ratings, average: 4,11 out of 5)

Almost all dog owners should first think about the healthy maintenance of their pet. It is so provided by nature that a dog must have its own place, your own personal territory. When keeping dogs in an apartment, these conditions may not be met. Therefore, owners of summer cottages or country houses most often began to use enclosures to keep their four-legged friend. After all, an enclosure is an area where a dog feels like an owner and does not have to worry that someone can harm it.

A dog enclosure is necessary if:

• Large pet size does not allow healthy living in an apartment. Large breeds include Alabai, Caucasian Shepherd, Newfoundland, St. Bernard, Mastiff, etc.
• From time to time it becomes necessary to isolate the dog for periods when guests arrive or various work is carried out on the site.
• A guard dog lives in the yard. Then the enclosure becomes a home for her, where she can hide from bad weather (snow, rain) at any time.

The finished enclosure can be made to order, or you can buy it in a specialized store. But, if you want to save money and have minimal construction skills, it is better to build an enclosure with your own hands. At the same time, you can completely adapt this structure to the location and size of your site.

Selecting a location

Before you start building an enclosure, you need to decide on its location. If you install it in the farthest part of the yard, your pet will become irritated, bark loudly and howl frequently. And this leads to loss of peace for the owners and sometimes even the emergence of conflict situations with neighbors. Wrong location of the enclosure nearby with a fence, especially if there is a busy street nearby, because people passing by and passing traffic will often distract and irritate the dog.

The optimal location is considered to be front yard. The enclosure will be located near the path and gate. At the same time, your dog will have the opportunity to monitor everything that is happening in the yard and will be quite free in his shelter. And of course, when creating comfortable living conditions, it is very important that part of the enclosure is located in the shade, and the walking area and bed are in the sun.

You should not place your dog’s home near a garage, compost pit or other objects with a strong odor, which can cause great harm to the dog’s sense of smell.

Sizing

Remember that the dog needs a lot of space to move around the enclosure, so:

• An enclosure for dogs of medium breeds with a height at the withers of no more than 50 cm must be at least 6 m2;
• An enclosure for a husky or Labrador, i.e. for dogs with a height at the withers of 50-60 cm, must have an area of ​​at least 8 m2;
• The enclosure for the Alabai, Caucasian Shepherd and other dogs with a height at the withers of more than 60 cm must be at least 10 m2.

The width of the enclosure should be larger one and a half times the dog's body length excluding the length of the tail, but not less than 1.5 meters. The length is calculated depending on the area and width.

Height determined empirically. You need to lift the dog by the front paws and measure the distance from the floor to the ends of the paws. By adding another 0.5 m to this indicator, we get the required minimum height of the enclosure. Many dog ​​owners adjust the height according to their height to make it convenient to visit their pet.

And, of course, it is necessary to take into account the gender of the dog. For the bitch, it is necessary to provide a place for the maternity ward and vestibule. For puppies, the enclosure must be protected from the weather. The puppies will not sit in the kennel, but will run around the entire enclosure. If the dog is not alone in the enclosure, you need to increase the resulting space by 1.5 times.

Gallery: DIY dog enclosure (25 photos)

Cell drawings

Having decided on the installation location and determining dimensions of the future home your four-legged friend, you need to make a drawing of an enclosure for a dog:

It is best to use proven materials. Wood or metal are mainly used. In no case should you engage in making various decorations on the grill to avoid the possibility of injuring your paws on sharp edges. Completely eliminate the use of chain-link mesh, as it quickly stretches and breaks at the joints, forming sharp edges.

It is worth paying increased attention on the quality of the boards for construction. It is preferable to use tongue and groove boards. They have a well-treated surface and grooves that reduce the number of fasteners.

It is advisable to reduce the use of fasteners to a minimum. It’s better to avoid nails altogether, as they become loose over time and pose a health risk to your pet.

Building foundation

Concrete is most often used to construct the foundation. First you need to decide for what period it is planned to use an aviary. And if the building is dismantled after some time, then in the corners of the future structure it will only be enough to drive square pipes to a depth of 0.5 meters. You also need to fill the perimeter with an expanded clay pillow.

For a stationary enclosure, designed for several years of operation, a more reliable foundation will be required. Therefore, the vertical posts of the frame are concreted. Then a cushion of sand and gravel up to 15 cm thick is made between them. A concrete screed with a thickness of at least 4-6 cm is made on top of this base.

Then onto the dried base wooden beams are attached with a cross section of 70 × 70 mm, on which the floor will be attached. The distance between the logs is 400-500 mm. The more often the logs are laid, the stronger the future floor will be. To make cleaning easier, the logs must be laid with a slope towards the front of the enclosure (1.5 cm per 1 meter of floor).

The use of wooden beams for the frame of the building is undesirable. This is due to the fact that the load from the walls and the roof will be big and the tree may bend. It is more reliable to use square metal pipes, similar to vertical posts. If you decide to build a collapsible structure, then it is best to use fastening using bolts and nuts. It is advisable to produce a stationary, durable structure using welding. Welding seams will create the necessary strength for the frame and allow your pet to avoid injury. In the front part of the frame it is necessary to make a frame for the gate.

Walls

The dog enclosure should have three solid walls to prevent drafts. And one wall with a lattice so that there is a possibility of viewing the territory. Some owners install two blank walls and sew up the third only halfway. All this is done so that the dog does not feel cooped up, and also to increase the amount of light in the enclosure.

The wall with the grating should face south, southwest, southeast. The grating is made of smooth reinforcement with a cross-section of 10 mm. In the middle of the wall we weld one reinforcement horizontally, and the rest vertically, in increments of 8-10 cm. This results in three attachment points.

The enclosure is made with two horizontal crossbars, which makes the structure more durable. The gate is made of iron rods. The width of the gate should be approximately 80 cm. The hinges are welded closer to the wall. If space allows, it is better to make the door opening inward. And, of course, it is necessary to install reliable locks on the outside of the gate.

It is advisable to make solid walls from tongue-and-groove boards. The use of such boards completely eliminates the cracks in the structure, which creates reliable protection from drafts.

When insulating a building, the outer layer is first made. Then the beam is fastened from the inside at a distance of 50-60 cm and a layer of insulation is laid. After which the interior lining of the enclosure is completed. Ecowool can be used as insulation. For the inner layer, plywood or any other sheet material made of wood is perfect.

Roof installation

To construct a roof, you first need to make a frame. It can be made from wooden beams with a cross-section of 70 × 70 mm. But the use of metal pipes, similar to those used in the manufacture of the main frame, is much more reliable and durable. These elements are fastened using bolts and nuts, but preferably by welding. The roof should slope towards the rear of the structure to allow water to roll off. Then a sheathing of wooden beams with a cross section of 5 × 10 mm is installed on the frame.

Roofing material is laid on top of the sheathing. You can use any roof covering, preferably sound-absorbing, to avoid harsh sounds that could damage your pet’s hearing. The roof must be made with a gap for ventilation, which will greatly help the dog feel good on hot summer days.

Laying the floor

The floor is laid on joists. Due to the cushion of sand and gravel, there is no need to insulate it. Floor boards must be treated with a special compound to prevent them from rotting. Fasten the boards only with screws, since they, unlike nails, are safe for your pet’s paws.

There is no need to make the booth too large so as not to waste heat in cold weather. The height and length of the booth should be slightly larger than the size of the dog, and the width should allow the dog to lie quietly without resting against the walls.

For the manufacture of the frame, mainly wooden beams with a cross section of 50 × 50 mm are used. The walls are made of boards. An important condition is the insulation of the booth. It is possible to use ecowool, which is sewn between the outer and inner walls of the booth.

The floor is not made, since the booth is installed on the main floor.

The roof of the dog house can be flat, because this is your pet’s favorite resting place during the daytime. It is better to make the roof removable for easy cleaning of the booth.

Husky enclosure

Enclosures for husky dogs have their own minor differences:

• The height of the husky enclosure should be from 2.2 m. This is due to the fact that huskies are a very jumping breed.
• The lattice of the enclosure is made of mesh, not rods. When jumping, the dog clings to the mesh, which is almost impossible when the mesh is made of rods.

As you can see, there is nothing difficult in building a home for your beloved pet. And all your work and efforts will be rewarded with the good mood and health of the dog.

The advisability of arranging a home for your pet on the territory is beyond doubt. Even the only argument that bringing a dog “closer” to nature has a positive effect on its health, activity, and longevity, negates all the arguments that it is hardly worth spending time and money on. If you think about it, a dog enclosure made with your own hands, according to your own drawings, is much preferable to factory-made products. If only because you still have to think carefully about how to place the purchased structure on the site without disturbing the general style of its design.

When erecting this building, you must first think about how comfortable it is for the dog and during what period it will be behind the fence. And there are quite a lot of other nuances. But there are certain requirements for any enclosure that you should know and be guided by in the process of arranging it.

• Recommended area (m²) depending on the height of the dog at the withers (cm): 6 – for 50, up to 10 – no more than 65. If it exceeds 65 cm, then ten “squares” is the acceptable minimum. But this only applies to male dogs. For the bitch, the enclosure is equipped taking into account the fact that she will have to breed and raise offspring.
• Good review. The dog must see the entrance to both the site and the owner’s house. Based on this, part of the enclosure fence is made clearly visible. As a rule, in areas adjacent to a residential building, chain-link mesh is used for this purpose. It must be taken into account that it is traumatic for the dog. This applies to ordinary, standard products with standard (average) cell sizes. If you choose it, then only with large ones so that the animal’s paws do not get tangled in it. Otherwise, damage to the dog’s claws or teeth cannot be avoided.

• Cardinal directions and wind rose. Regarding the last criterion, it is necessary to take into account local features and make the wall in the blown area continuous. Dogs, like people, do not like drafts. In addition, if you choose the wrong site for an enclosure on the territory, it will be systematically covered with snow and leaves, and it will be constantly hot on the site and in the house. Here it is necessary to correlate all these factors with the climate of the region and the specific location of the residential building; whether there are ponds, forest belts or other natural barriers nearby, whether it is in a lowland or on a hill.

• Location of the house. An aviary is not only a “big box”, but also a platform on which the dog can play, bask in the sun, and so on. Therefore, it is recommended to arrange the open part of the structure where it is illuminated for most of the day. And it is advisable to position the entrance to the house so that it “looks” to the South, South-East or South-West.

• A place for it is chosen on a hill, or the structure is raised artificially. This precaution minimizes the effect of cold soil on the floor. The flooring should be made of planks; this further reduces heat loss through the bottom. But that's not all. Don't forget about your pet's claws. Concreting the floor or covering it with hard sheets (for example, metal, asbestos-cement) will not lead to anything good. In addition, on a cold basis, the risk of disease in the animal’s joints increases sharply.

However, there is a nuance. There is still no consensus on the issue of gender in the enclosure. Even experts constantly argue about how best to arrange it. The fact is that animals by nature, on a subconscious level, have the habit of relieving themselves on the ground. Therefore, it is better not to cover part of the floor with flooring, but to leave it as is. But you will have to take precautions. The dog can dig a hole and get out of the enclosure.

One of the options for eliminating this problem is to prepare a solid base with a wall (like a pit), and pour a layer of earth on top. It is easy to change when it gets dirty. The advantage of this solution is that if the area in the enclosure is large, then this will be much more difficult to do, since the dog will begin to mark it everywhere.

• Material for the house. Unlike human habitation, it naturally does not have utilities that provide an acceptable microclimate. Therefore, for such a structure, wood is the best choice. Firstly, it “breathes”. Secondly, it holds heat well. Thirdly, it does not heat up in the sun, therefore, the dog will not feel stuffy in the house.

• Roof. The preferable option is if it is mounted above the entire enclosure. The dog is unlikely to hide from the sun's rays or precipitation in a house if it's hot outside. The stuffiness in a closed space will force her to seek refuge outside it. So you should think about where and how to organize a place so that the dog can lie down in the shade at any time. A roof over the site solves all these problems. The main thing is to ensure its sound insulation and at least minimal insulation. Then even in late autumn the dog will be comfortable in the enclosure.

• Tree species. When choosing lumber, it is advisable to focus on 3 criteria - resistance to rotting, ease of processing with conventional tools and reasonable cost. From this point of view, larch is the best option. And if the board is thick enough, then a durable and warm floor (possibly without additional thermal insulation) is guaranteed.

• Gate. Only opening inward. Otherwise, the dog will be able to get out of the enclosure on its own, and at any time, even the most inopportune. After all, poodles or small Spitz dogs are not kept in such fenced areas. In addition, the latch must be installed not only at a height, but also in such a way that the dog cannot open it under any circumstances. It also needs to be placed on the door of the house.

• Structural strength. Guard or fighting dogs are distinguished not only by their mobility, but also by their considerable weight. It is unlikely that a “weak” fence will last long if the animal constantly jumps on it - either out of joy when it sees its owner, or out of anger when a stranger appears on the property.

The best option for an enclosure is a wooden house and a forged (or welded) fence. But if it’s not difficult to build the first one with your own hands, then the second one will have to be ordered. Perhaps this is the only disadvantage of this solution.

Key points in building an enclosure

Selecting a location

It is necessary to achieve the optimal combination of several factors:

• Minimum extraneous noise. Firstly, the dog, like the owner, periodically needs rest, absolute peace. Secondly, annoying sounds will only distract the dog, preventing it from performing its main function - protecting the territory. Therefore, it is not worth setting up an enclosure near the fences along the perimeter of the site and a residential building.
• It is necessary to provide the dog with a good view of the approaches to the residential building. That is, on the line between the enclosure and the building there should not be any blocking “objects” in the form of garden buildings, pergolas, sculptures, tall dense vegetation, and the like.
• For the dog house and playground, you need to choose a place on a hill. If the territory is planned, it should be organized artificially; An “elevated” enclosure will not only provide the dog with a good view of the area, but will also save his home from flooding (snow drifts) during heavy rainfall or melting snow.
• Maximum distance from segments of the territory where odors may come from - septic tanks of the simplest modifications, cesspools and compost pits, and so on. Such proximity can negatively affect the dog’s sense of smell.

Aviary diagram

When choosing a suitable option, in addition to the size of the dog, its breed, habits, seasonality of residence, and whether the enclosure is a permanent home for it or is only used for walking the dog are taken into account. For example, if the area is densely planted, and there are also a lot of expensive ornamental plants, the owner is unlikely to risk taking the dog out of the house, freeing it from the leash and letting it go for a walk anywhere.

For such cases, the enclosure is made in the form of a mesh fence, but without a booth. The same applies to the roof - it is either installed or not. If, in addition to fencing the site, there is a house for the dog in which he can sit out bad weather, then it is hardly worth installing a canopy. A selection of photographs and diagrams will help you choose the best option for such a building for your site.

Foundation

The owner decides whether to do it or not. But if you plan to install a dog house, then you will have to install it. There are different recommendations on this issue - slab base (by pouring mortar), columnar base, shallow tape. The most rational option for a small wooden building is to use sleepers (or tarred timber). By the way, many light garden buildings are built using this technology.

There are several advantages:

• You won't have to do any excavation work. This means limited space in the planted area and the risk of damage to the roots of vegetation. All that is needed is to dig small ditches (10–15 cm) to lay the timber. This will give it stability and protect it from displacement in the horizontal plane.
• High speed of construction.
• The costs for the foundation for the enclosure are minimal.
• On such a foundation it is very easy to fix both the lower crown of the booth and the wooden flooring of the walking area.
• Good maintainability of the base. Replacing a rotten sample is easy.

All other foundation options are a separate topic, more relevant to the construction of a private house.

Main stages:

• Marking the territory.
• Excavating a layer of soil in accordance with the layout of the enclosure.
• Compacting the soil, adding coarse-grained sand or fine crushed stone, followed by compaction.
• Laying P/E film as a waterproofing material. It is not advisable to use roofing material - in damp conditions it will last at most 3 years, no more.
• On top there is a beam. Additionally, its displacement can be eliminated in two ways. The first is to drill 2 holes and drive scraps of reinforcing rod into them. The second is to place them on the sides and ends of the workpieces.
• After leveling, the elements of the wooden foundation are fastened with staples, corners, and plates.

Dog house and play area

The nuances of its construction primarily depend on the selected materials. If it is wood, then erecting a frame and covering it with boards is not so complicated that you can’t figure it out. You need to pay attention to such moments.

• All wooden blanks must be processed with high quality. This applies not only to antifungal impregnations, but also to the surface. Readiness for installation is checked by hand; There should be no burrs on the tree, otherwise the dog may get hurt.
• When fastening parts together, it is better not to use nails. In addition to the fact that they split the wood, they are also difficult to direct accurately along the axis. The result is protruding ends. And the maintainability of such a site is extremely low. Optimally - self-tapping screws for wood, with preliminary drilling of channels and chamfering.

It is not recommended to use plastic panels (at least for external decoration) or other “chemicals” when building a dog house. Animals are very sensitive to the slightest odors, and many of them simply make the dog nervous. He will avoid such a booth.

Flooring

Before installing it on the foundation beam, it is advisable to make an expanded clay bedding on the ground. Burnt clay granules allow water to pass through well (it will not stagnate under the boards of the site) and are an excellent heat insulator.

Fencing

Either timber or small cross-section pipes are most often used as supports.

It is not necessary to copy any of the enclosures you like and look for exact drawings. This is just the basis for our own developments. Doing it yourself means doing it in a way that is convenient for the master in relation to a specific area and breed of four-legged pet. The main recommendations are noted, and everything else is a figment of your own imagination, depending on material capabilities and free space on the territory.

From this article you can learn how to make a dog enclosure with your own hands: photos of street and home structures made independently, unusual solutions and useful tips from experts. The text describes in detail the technology of construction of structures intended for keeping animals, with visual materials and a detailed description of the entire process: the choice of drawing, materials and dimensions of the structure, followed by manufacturing instructions.

Any dog ​​that lives outdoors for a long time needs a special place where it can feel comfortable. This area should have a fence and the necessary amenities so that, if necessary, the animal has the opportunity to sleep peacefully, play and hide from bad weather. To organize a space suitable for these purposes, it is enough to build an enclosure for a dog that will meet all its needs.

In what cases is an outdoor enclosure for a dog necessary?

Medium and large-sized dogs are kept outdoors. Animals of small breeds are less hardy and need to be kept at home.

An outdoor dog enclosure is necessary in the following cases:

1. The size of the animal does not allow keeping it in the house - experts recommend building enclosures for Caucasian Shepherds, Alabais, Newfoundlands, Bernese Mountain Dogs, Mastiffs and other large breeds.
2. The need for temporary isolation of the animal - during construction work in the courtyard of the house or in the event of guests arriving, there is a need to protect the animal.
3. Keeping a guard dog - if the animal performs the function of a guard, the enclosure will serve as a home for the dog living in the yard. This structure will protect the pet from rain, snow and wind.

Many stores allow pet owners to buy an inexpensive outdoor enclosure for a dog of any size or modification ready-made or order its production. If you wish and have minimal construction skills, you can independently build a beautiful and reliable home for your animal.

What types of dog enclosures are there: photos and classification by type of construction

Before starting the manufacturing process, you need to determine what the structure should be that will stand in the courtyard of the house. In the photos found online, the enclosures have different configurations and designs. The appearance of the structure depends on its purpose, the size and breed of the dog, the materials chosen, as well as the personal preferences of the animal owner.

Helpful advice! Regardless of the chosen design, it is worth taking care of wall insulation. Ecowool or polystyrene foam can be used as thermal insulation lining.

The designs of dog enclosures are:

1. Temporary.
2. Closed.
3. Capital.

The structures of temporary enclosures are open. The area allocated for keeping the dog is fenced off with a mesh or fence. To arrange the internal space, a booth is installed and a flooring is formed. Such enclosures do not have a roof, since the animal is in them temporarily.

Closed structures belong to the category of intermediate buildings. For convenience, a flooring is formed inside and a booth is placed. This type of enclosure is considered partially insulated, since the walking area is fenced with solid walls on three sides. The fourth surface has the form of a lattice to give the animal the opportunity to observe what is happening in the yard.

Capital-type enclosures have one translucent wall in the form of a lattice. The remaining surfaces are made solid and well insulated. Such structures have a deck and a roof. A booth is placed inside or a special sleeping place is equipped. For this purpose, part of the enclosure is fenced off.

Features of enclosures for puppies and small breed dogs

In addition to outdoor enclosures, there are also home structures that are used in residential premises for keeping puppies. Such products are small in size and very light in weight. Most of these enclosures have a prefabricated structure.

Inside you must place:

• soft bedding;
• a bowl of water and food;
• a diaper or tray so that the dog can relieve itself;
• toys.

At home, enclosures are used for Yorkies and dogs of other decorative breeds with miniature sizes. Some owners do not want to limit the freedom of their pet with the help of such a barrier, but there are many situations when such a design simply cannot be done without.

Important! An enclosure is not a place of punishment for an animal, regardless of whether an outdoor or indoor structure is used. If the dog is inside, it should not be punished. The animal should feel safe and have a positive outlook on their time there.

Varieties of home designs for pets, their advantages, tips for choosing and making them yourself.

At least 10 m² should be allocated for the construction of an enclosure for a shepherd dog (Central Asian, Caucasian) or Alabai. It would be desirable if there was more space. Having established the minimum dimensions of the area, you also need to take into account the sex of the animal. Males and females need different living conditions.

For a female dog, it is necessary to provide a vestibule and a maternity area. These structural elements will be located inside the enclosure. When puppies are born, they will not sit in one place, but will begin to move around the territory while playing. For this reason, the structure must be as protected as possible from bad weather conditions.

For a male dog, you will need to install a reliable and large booth. When making an enclosure for an alabai with your own hands, you should remember that males are physically strong, so both the castle and the enclosure itself must be as strong as possible. Otherwise the dog will simply break it.

How to make an enclosure for a dog with your own hands: choosing the optimal place for construction

Choosing the optimal location is an important condition for building a good enclosure for an Alabai or a dog of another breed. The structure should not be installed in a remote location. If the dog is isolated from people, he will bark loudly and become restless. An aviary next to a fence wouldn't be a good idea either. The animal will be constantly interested in people passing by the yard. A large dog can easily jump over a fence, choosing a snowdrift as a support point in winter, for example. This can lead to a lot of trouble.

Important! The enclosure should not be installed near a compost pit or other sources of strong odors, otherwise the dog may partially or completely lose its sense of smell.

The optimal location for the enclosure will be the front part of the yard. In this case, the structure will be located near the gate leading to the house and the path. Thanks to this, the animal will have the opportunity to observe everything that is happening around while in an isolated shelter. It is not recommended to choose a low-lying part of the yard for construction. In this case, the enclosure will be flooded with rainwater. In addition, dogs love an overhead view, so you should give preference to a small hill.

If you place the entrance on the south side of the site, the animal will be hot in the summer. Only in cold regions is this zone allowed to be used. But even in this case, it won’t hurt if there is a tree nearby that provides shade where the dog can hide from the sun.

If you make a dog enclosure with your own hands with a door on the north side, this is fraught with trouble. Precipitation will be the source of these inconveniences. If the region where the site is located is characterized by frequent snowfalls, in winter you will have to constantly clear these drifts in order to enter the enclosure. This requires a significant investment of time and effort, which the owner may not have.

Making an enclosure for a dog with your own hands: photos of designs from different materials

If future construction involves making an enclosure for a large dog intended for permanent residence, care should be taken to protect it from drafts. To do this, it is advisable to block the back and adjacent walls.

In this case, the following should be used as building materials:

• bricks;
• type-setting wooden panels;
• thick tongue and groove boards enclosed in metal frames;
• monolithic concrete;
• cinder blocks.

It is better if the open wall faces south, southwest or southeast. To make it, it is advisable to use metal rods. To create a gate, a metal frame and rods are suitable. Dogs have a good mind, so they can open many locks with ease. The locking device on the gate must be reliable.

Important! It is not recommended to use mesh for dog enclosures in construction. Despite the fact that this material is more affordable than metal rods, it will last much less. In addition, the mesh can injure the animal if it breaks.

Comfortable living is only possible if the base is warm and dry. For this reason, experts recommend using wood to make floors in enclosures for huskies and other dogs. A covering formed from thick boards, if properly processed, will last quite a long time and protect the animal from drafts. Antiseptic agents are provided for this purpose. These compounds provide protection against rot and mold. In addition, you need to take care that there are no protruding nails or knots so that the dog does not get hurt.

To build the foundation, you can use concrete. However, in this case, the presence of wooden flooring is mandatory, as is ventilation under it. Materials such as concrete and asphalt should not be used as the sole base without a coating. They can seriously damage the animal's joints and claws.

The roof structure can be anything, the main thing is that it has a canopy. The list of roofing materials recommended for use includes:

• slate;
• metal tiles;
• profiled sheet;
• soft roof.

When choosing roofing materials, it is better to give preference to coatings that have a high level of sound insulation. Dogs' hearing is very sensitive and during rain the animal will experience discomfort if the drops drum loudly on the roof.

Making dog enclosures with your own hands: photos of designs designed for a pack

To support a whole flock, you can build one structure that will take into account the needs of several animals. Such structures are necessary in cases where there are several dogs on the site or the owner is breeding them. Most often seen in the photo, enclosures for two dogs or more animals have the appearance of tunnel structures. They are good for keeping a pack, but are completely unsuitable for housing one pet.

Such structures consist of several separate sections with semi-winter roads. Each section should be covered with a canopy for 3/4 of its length. In this case, about 4 m² of internal space will be allocated for each dog. The width of the section should correspond to the length of the animal's body without a tail.

To save money, you can make your own dog feeder from wood, using a jigsaw to cut holes for the bowls and a drill with screws to secure the structural elements.

Important! Sections of an enclosure with several dogs must be separated by solid partitions, otherwise clashes between animals are possible during feeding.

The feeder is made in the following order:

1. To begin with, a drawing with dimensions is selected for making a feeder for the dog’s enclosure.
2. The markings in accordance with the drawing are transferred to the wood. For this, a furniture board or board can be used.
3. Using a jigsaw, the material is cut according to the markings.
4. Holes for screws are formed (3 mm drill).
5. Using a jigsaw, circles are cut out for the bowls and the corner parts of the parts are rounded.
6. All elements are sanded and connected with screws, after preliminary gluing.

To make the feeder look neat, all cracks and screw heads must be filled with putty intended for wood. Then the surface is again treated with sandpaper and painted in any color you like. For these purposes, only safe and environmentally friendly compounds are used so that the dog’s health is not harmed during use.

Calculation of the size of an enclosure for a dog based on basic parameters

To create a drawing you need to know the dimensions of the structure. It is not only the area that is important. The size of a dog enclosure also depends on such a parameter as height. The structure is designed in such a way that the animal can stand freely on its hind legs without resting against the roof.

The minimum permissible side length of the enclosure is 2 m. This is quite enough for the animal to move freely, but for complete comfort it is better to increase this parameter. A dog can live permanently in a large enclosure. If it is of minimal size, you will have to let the animal out twice a day or at night so that it can stretch its legs and run around in the yard.

Once the dimensional parameters of the future design are determined, you can begin to develop a drawing of an enclosure for the dog. To do this, you can use ready-made projects or draw up a construction diagram yourself, taking into account personal preferences.

When developing a drawing of an enclosure for a husky or a dog of another breed, you need to add the required elements to the diagram of the future structure:

1. A place to sleep is an area where a sleeping place is equipped or a booth is installed.
2. A walking area is an area where the animal can actively move, relieve itself and play. The larger this zone is, the better.
3. Place for food - a couple of bowls are placed in this area. One of them contains water, the second contains food.

Helpful advice! To simplify the feeding process, you can provide a window in the enclosure to serve food without going inside. If the dog is tall, bowls should be placed on a platform taking into account the height of the animal.

In addition to the dimensions, the drawing must indicate:

• winter road border;
• open area for walking;
• platform border;
• area for opening a gate or entrance door.

Preliminary drawing up of a drawing will allow you to rationally distribute all the elements of the enclosure and calculate the required amount of materials, as well as avoid mistakes.

Common mistakes when building a dog enclosure and expert advice

You should not skimp on materials, especially when it comes to fasteners and amplifiers. The design must be strong and reliable. It is not recommended to use slats, jibs and similar materials to strengthen the walls. A large dog will break this structure in one go.

When developing a project, you should not delve into the design. Decor that a person will like will create inconvenience for an animal. It is highly undesirable to use forged elements and other decorations that can become a source of injury to the animal. A dog's head or paw can easily get stuck in metal curls, which will lead to a fracture and other unpleasant consequences. The enclosure must be installed so that the dog has an overview and can control the situation.

The presence of a flower garden, alpine hill or flower bed near the enclosure is undesirable. Flowering plants emit aldehydes and ethylene. These substances cause irreparable harm to the dog's health, disrupting its sense of smell.

When building walls for an enclosure, it is imperative to take into account the size of a shepherd dog or other breed if these surfaces are lattice. In this case, metal rods are installed in increments of 5-10 cm. After construction is completed, it is imperative to check whether there are any defects left on the surfaces of the structure that could injure the animal. In metal enclosures, where elements are fastened by welding, be sure to inspect the seams for reliability.

To reduce the likelihood of injuries during operation, during the construction process it is advisable to use other types of fastening elements instead of nails.

Suitable for these purposes:

• bolts;
• self-tapping screws;
• screws;
• screws.

It is very important that the roof has a good rafter system and is sloped. Thanks to this, the structure will be reliably protected from the wind, and precipitation will not accumulate on its surface.

Before making an enclosure, it is advisable to make a foundation or form a base so that the wooden flooring is not subject to shrinkage and rotting. The presence of such a hill will provide the necessary ventilation.

Helpful advice! In addition to the shutter, it is advisable to install eyelets on the door to the enclosure. When it breaks, these elements can be used to install a padlock.

How to build an enclosure for a dog in the yard of a private house

Large dogs require a permanent enclosure that will last for many years.

For construction you will need:

• sand and cement;
• boards and metal profiles;
• corners and channels;
• pipes and rods;
• roofing material for the roof.

The simplest base option for a homemade enclosure is a strip foundation.

Its construction is carried out in the following order:

1. A trench 0.5 m deep is dug.
2. A simple formwork structure with a height of 0.2 m is made.
3. A gravel cushion is formed.
4. The filling is prepared using water, sand and cement.
5. The formwork is filled with mortar.

When the fill dries, a layer of waterproofing material is laid. Roofing felt or polyethylene film is suitable for these purposes. The waterproofing material will protect the metal parts of the structure from corrosion, and the wooden elements from fungus.

Flooring manufacturing technology:

1. Channels are laid on top of the strip foundation and connected by welding into a rectangle.
2. The flooring boards are treated with an antiseptic and laid in this rectangle.
3. Insulating material (roofing felt) is laid.
4. A gravel bed is formed and concrete is poured.
5. When the solution reaches half its strength, logs made of wood are embedded in it.
6. A covering is formed from wooden boards, which are fastened with self-tapping screws.

Between the floor and the ground surface you need to leave 15 cm for air circulation, which will contribute to the rapid evaporation of moisture. It is advisable to tilt the floor 2° towards the front door. This will make the process of cleaning the enclosure easier.

How to build an enclosure for a shepherd dog with your own hands: assembling the structure

As a basis for the construction of walls, a profile pipe is suitable, which is bolted or welded to the channels. The rod is laid inside the enclosure from one corner to the other. You need to ensure that all elements are positioned evenly. You can use a building level for this. Next, vertical rods are attached in increments of 5-10 cm. Then the door is made. To install it, you need to leave an opening in the welded frame of the enclosure.

Helpful advice! Square metal rods are stronger than round ones.

Depending on the purpose of the enclosure, the structure can be lined with one, two or even three walls. Any material you like can be used for exterior finishing. On the inside, the walls must be insulated and sheathed with wood.

Roof construction technology:

1. A metal corner or pipe is attached on top of the walls around the entire perimeter, which will serve as a connecting link.
2. A channel is installed in the central part between the side walls, which will strengthen the structure.
3. The resulting frame is used to secure the boards. Recommended size: 5 cm.

The structure is covered with corrugated sheets, slate or soft roofing (the latter option is more desirable). The aviary is almost ready for use. All that remains is to equip it by installing a booth and a feeder.

Making a dog house with your own hands: drawings and description of technology

To properly make a dog house, you need to determine the optimal size and shape. You should not select an overly complex design. The presence of elements such as ladders, ledges and partitions will create inconvenience for the animal. The ideal option would be a rectangular kennel with a pitched roof. It is better to place the entrance on the side.

Helpful advice! It is advisable that one of the walls or the roof be removable. This will make the structure easier to clean and disinfect.

DIY doghouse construction: drawings and dimensions

The size of the structure is selected taking into account the needs of the dog. In this case, the basic parameters of the animal are taken into account.

These include:

• height at withers;
• length from nose to tail;
• total height of the animal;
• chest size (width).

Size of the booth taking into account the height of the animal at the withers:

How to determine the parameters of the frame part of the booth:

• the width and height of the structure corresponds to the height of the animal;
• the depth corresponds to the length of the animal;
• the width of the manhole is equal to the width of the chest;
• the height of the hole corresponds to the height of the animal at the withers.

You must add 5 cm to each value. Once the dimensions are determined, they are plotted on the drawing.

Technology for building a dog house with your own hands from scrap materials

Wood is the most accessible of available materials. To build a booth, you will need bars with a section size of 40x40 mm and boards (25 mm).

Construction is carried out in the following order:

1. Based on wooden blocks, a frame part is formed, equipped with both vertical and horizontal stiffeners.
2. An area is being formed where the manhole will be located.
3. The bottom of the booth is knocked together.
4. The walls are being covered.
5. A retractable roof is being manufactured. It can be flat or gable.
6. From the outside, the wood is impregnated with drying oil.

The opening of the manhole must be protected from wind and drafts. To do this, just secure a piece of foam rubber, tarpaulin or thick fabric in the upper part of the outlet.

For the construction of do-it-yourself enclosures, any available materials can be used. On the Internet you can find a lot of visual photos and videos with detailed descriptions of the technologies for creating these structures. By following these instructions and the advice of professionals, you can create a beautiful and comfortable enclosure in your yard that will become a wonderful home for your dog and protect it from bad weather.

How to make an enclosure for a dog with your own hands: video instructions

Types that you can make yourself

A dog enclosure is a fairly large, constructed structure where an animal can hide from heat or cold and will prevent the animal from attacking your guests. It’s not difficult to make it yourself - just understand what materials and drawings you will need. And this depends on what kind of enclosure you plan to build.

There are several types:

1. Completely open (usually a piece of land fenced with a metal mesh with a booth inside)
2. Open front, partially insulated (closed by solid walls on 3 sides, with roof, boardwalk and shelter)
3. Partially insulated with an adjacent fenced plot of land for walking (partially closed on 3 sides by solid walls, has a booth and a walking area inside)

Each type combines perfectly with the other, it can be remade and supplemented with details to suit your taste. There are many photos of do-it-yourself enclosures on the Internet.

Find the answer

Required building materials

Make an aviary with your own hands? To make any of THEM, it is worth buying metal profile pipes, wooden panels at least 2 cm thick for walls, fastening materials, roofing material, concrete. The price of the material needed for construction depends on the characteristics of your structure - its size and type.

On average, the price of a metal profile pipe is from 35 rubles per meter, wooden panels cost about 6,000 rubles per cubic meter, soft tiles - from 400 rubles per square meter. You can replace all these materials with analogues.

There is no need to build the wall of the enclosure from a metal mesh - such material is dangerous for the pet, it can injure its paws on it.

How to make your animal feel comfortable

In order for the dog to live well and calmly in the enclosure, it is better to follow several rules when building this structure:

1. A sleeping place must be provided for her. This is often a kennel made of wood with bedding inside. The booth itself must be built taking into account the size of the animal.
2. To protect from the sun or precipitation, it is worth organizing a canopy if you have a completely open type.
3. The entire area should be at least thirty square meters - this is necessary so that the dog is comfortable, so that he can run freely and warm up.
4. It should be equipped with a feeding area and a drinking bowl for the animal.
5. On the front part, do not forget to build a door with a good latch for entering and exiting the enclosure. The door must open inward and have 2 locks - both outside and inside.
6. All wooden buildings should not be in contact with the ground - it is worth considering a concrete foundation.

Stages of self-construction in the photo

1. First you should determine the type and size, which directly depend on the size of the animal. On average, the enclosure ranges in size from 6 to 10 meters in width. Having chosen the size, we begin to draw the drawing. We calculate how much building material we need.
2. Having purchased the necessary material, we begin construction. First, we build the floor. The easiest way to make it is from concrete, but in winter it will be uncomfortable for your pet to be on concrete. It is worth covering the stone with wooden boards. The floor should be made at a slight slope so that water does not accumulate on it during rain.
   
   
3. The next step should be the installation of walls. At least one of the walls must be translucent and made of metal rods. The grille should be welded, and then primed and painted to protect against corrosion. The remaining walls can be made from boards. Make sure that all structural elements are connected well to prevent your pet from escaping. All walls must be firmly embedded in the ground.
   
   
4. Then we begin to lay the roof and install a door with two latches.
   
5. The fifth stage is the design and installation of the booth. It will be most convenient to build a wooden booth according to a separate drawing, calculating its dimensions depending on the size of the animal.
   
6. The finishing touches are to install the feeder and lay down soft bedding. The enclosure is ready and your pet can move in
   

Video

The relationship between breed and enclosure type

The type of enclosure depends on the breed - for short-haired dogs it must be insulated, but by building it for fluffy dogs, you can save a little on insulating materials.

Breeds such as the German Shepherd or Labrador require a lot of movement, so make the walking area larger. The calmer and more reasonable Alabai and Caucasians need a little less space.

Projects and drawings for self-construction

Where should it be located

The main thing is to choose a place to build on your site. There is no need to place it in the most remote part of the yard. There is a great opportunity to regret what you have done, because a dog that is isolated from society will worry and bark loudly.

A dog enclosure would also be superfluous next to a fence: your dog will be interested in people passing by. And if the dog is large, it can easily jump over the fence, for example, in winter, choosing a snowdrift as a fulcrum. This could end in trouble for both of you.

The best place is at the front of the yard. It will be located near the gate to the house and next to the path. The dog will be able to observe what is happening around him, but will be quite isolated in his shelter.

Provide your pet with good living conditions. The construction should be treated with special responsibility. Before starting construction work, please consider:

• Pet breed;
• Age;
• Location of the site;
• Wind rose.

Features of the structure of walls and floors

If the enclosure is being built for a dog that will always live in the yard, it is important to protect it from drafts and lock the adjacent and rear walls. To build these walls it is better to use:

• Wooden typesetting board;
• Thick tongue-and-groove boards in metal frames;
• Brick;
• Monolithic concrete;
• Cinder block.

The open wall should face south, southeast, southwest. It is made from metal rods.

It is better to use rods rather than mesh. It will be more expensive, but will last longer. The mesh will break after some time.

The gate is made using a metal frame and iron rods. How should the enclosure be closed? Dogs are smart and cunning creatures. They open many locks. The lock must be secure and located outside.

Provide your pet with a warm, dry floor. Wood is often used for flooring. A floor made of thick planks is durable and will protect against drafts. The base can be made of concrete, but the presence of a wooden deck with ventilation from below.

Asphalt, concrete and other surfaces can cause damage to your pet's nails and joints.

The boards need to be treated with special products to protect them from mold and rot, and care should be taken to ensure that there are no knots or nails on them, because the animal can get hurt.

You can make wooden flooring in the form of a panel structure. First you need to assemble a metal frame from a profiled pipe. Then cover it with boards at least 40 mm thick.

When installing the floor, pay attention to the fact that the boards should not sag and there should be no gaps between them. Otherwise, the dog will easily get his claw in there. The boards should be open at the bottom, this will prevent rotting processes. It is better to waterproof the soil under the flooring using roofing material.

To create the required gap, it will be necessary to raise the flooring onto a stand, the brickwork will serve as a support.

The floor should be sloping from the side walls to the center and towards the front.

There are no special requirements for the roof; it is important to have a large canopy. It can be made of any roofing material. For example, from:

• Metal tiles;
• Slate;
• Soft roofing;
• Profiled sheet.

The best roofing will be one that will protect the dog from precipitation, but will have high sound insulation. The slope of the roof should be in the direction of drainage, then water will not accumulate under the decking.

The general condition for keeping a dog in an enclosure is a place for walking and a spacious kennel. The kennel should not be huge, but the dog should sleep comfortably in it with his whole body stretched out. In cold weather, it should warm the house from the inside with its warmth.

Having a place to walk is necessary so that she can relieve herself, run or stretch. There may be a vestibule next to the booth: the dog’s personal belongings can be stored inside it. For example, toys, bones, bowls, maternity kennels for puppies.

Booth and feeding area

Take building or purchasing a booth seriously. It is your pet's home, shelter, and place to sleep. Consider the nuances:

• The size of the booth should be suitable for the pet;
• Inside, the dog should be able to turn around and stretch out;
• You don’t need a lot of space, such a booth will be cold;
• For the walls of the booth, use coniferous trees;
• If the climate is harsh, additionally insulate the walls;
• Make the roof of the booth removable, so you can get to the dog or get him out of the booth in case of illness;
• It is better to make the roof flat - for the pet it is an observation point for what is happening;
• Make sure that the dog does not leave the enclosure using the booth as an aid.

Set up a feeding area closer to the fence. It is better to make or purchase a table with recesses for bowls for water and food.

Aviary for puppies

An aviary in an apartment will be useful for puppies if the dog plans to have them. During the period when the bitch is feeding puppies at 1 month, a mini-aviary will be the best purchase.

The apartment's enclosure should contain dog bedding, toys, a bowl of water and a diaper on which the dog can relieve itself.

An enclosure is not a place of punishment for a dog, no matter where he is at home or outside. This is a home where she should go with a positive attitude and feel safe there. In it, she cannot be punished or beaten.

Knowing the basic parameters, construction steps and technical features, you can build a pet house yourself.

Features of keeping a dog in an enclosure

In order for a pet to feel good and not get sick, its owners first of all think about the fact that its life needs space. So that the animal receives enough light. A booth is placed in the enclosure. The size should correspond to the parameters of the animal.

You can make a canopy of warm material on the door of the booth, which will protect your pet from colds. Felt works well for this. The enclosure should be kept clean.

The dog needs communication, so you need to set aside time to give it your attention. If this is not done, your pet will grow up fearful or, on the contrary, will show aggression.

From time to time the dog needs to be walked. This is necessary for her physical development. Aviary maintenance has its undeniable advantages.

Properly and correctly created conditions for a pet will help it grow up hardy and will not create problems with joint disease. It is imperative to remember about a balanced diet and prevent obesity.

How to accustom to an aviary

Dogs quite easily learn to understand their owner's commands. It is not so difficult to accustom them to an enclosure.

Dog handlers advise following some tips:

1. Place a treat on the territory of the enclosure near the entrance. The dog must come and take it itself. You cannot force or drag an animal. Once the first fear and uncertainty passes, the dog will make up his mind and approach the treat prepared for him. This exercise must be repeated until the dog calmly enters it;
2. Then you can put a feeder in it. First, you can place it at the entrance, gradually moving it to the place where you planned to install it. The dog will get used to it quickly, the feeder will evoke pleasant associations for it;
3. Teach your dog commands. For example, it could be: “Into the enclosure!”, “Place” or some other commands. Praise your pet for correctly executed commands;
4. When the animal gets used to it and can stay in it for some time, you should close the door and let him know that he should be there. You can pet the dog or pat its withers and give it a treat. If the dog expresses dissatisfaction: grumbles, whines, barks, this means that it is too early to leave him for a long time. You should not always indulge your pet; he may understand that actions can force the owner to open the door;
5. You can put toys and bones in the dog’s enclosure. It will be fun for her.

Homemade dog enclosure

An enclosure for a dog at home is necessary if: your pet has puppies; There is an indoor breed dog living in the apartment; other animals or small children appeared in the house. A pregnant bitch needs a secluded place where she can be sure of the safety of her offspring. An indoor aviary will become such a place. Slightly older puppies are active and often, while playing, tear, break and gnaw everything that catches their eye. Before the puppies are given to new owners, it makes sense to keep them in a playpen.

Often in apartments you can find enclosures for small dogs. Living in such a “house”, the animal gets used to the fact that food, a place for the toilet, and a dog bed are always in one place. When the habit is developed, the dog will not leave marks in different corners of the room, but will get used to order.

If your beloved dog considers itself the master of the house, then with the appearance of another dog or, for example, a cat, the animal may begin to be jealous, nervous and protest. As for families in which a child was born, sometimes the four-legged resident does not immediately react adequately.

To protect the new residents of the house and help the animal adapt to new conditions, it is advisable to set up an enclosure for the dog at home. A simple dog enclosure looks like a fence that can be installed anywhere in the room and, if necessary, moved or assembled. This playpen will be comfortable for puppies who cannot get out or jump over the fence. Their mother will be free to enter or exit the playpen.