Pipe bender for work: how to make the right choice. Pipe benders for round pipes Pipe bending machine crossword 7078

Pipe benders are used to bend pipes along a radius to obtain the product of the required shape. Most often they are used in the manufacture of parts for mechanical engineering and construction, as well as in the installation of communications, water supply and heat supply pipelines, ventilation systems, etc.

Using a modern and high-quality pipe bender for steel pipes, it is possible to bend a pipe without creases or flattening.

We offer the following types of machines:

Bezdornovye

RUB 130,131

RUB 170,516

198,000 rub.

RUB 245,902

RUB 282,000

RUB 376,931

RUB 445,551

RUB 627,320

RUB 817,097

RUR 882,197

RUB 1,030,277

Description of equipment

Maximum bending radius: 12.7 mm; Maximum bending angle: 180º.

Hydraulic

The HOT-150 (FBH-150) pipe bender is designed for precise hydraulic bending at an angle of up to 900 of gas, water and boiler pipes with a diameter of 1/2 to 2". Country of origin - Czech Republic. The pipe bender allows you to quickly and effortlessly bend pipes directly on site carrying out work - on construction sites, in gas, water supply and heating systems, in boiler rooms, on the territory of enterprises.

Maximum pressure: 10 t; Maximum piston stroke: 155 mm; Piston diameter: 60 mm.

For low carbon steel or stainless steel pipes. Additionally, up to 6 spare bending mandrels can be purchased. Pipes with a diameter of 2 to 3 inches must be filled with sand.

Max. pressure: 18 t; Max. piston stroke: 250 mm; Pipe diameter: 15.9-89.1 mm.

Electromechanical

The electromechanical pipe bender “Kachok” is designed for bending steel profile and round pipes by rolling them along a given radius and giving them shape, as well as solid squares and strips along the edge and flat. The pipe bender is designed for blacksmith and metalwork shops. An electromechanical drive with a chain drive on two lower shafts greatly facilitates the work.

Maximum power consumption: 0.5 kW; Pipe wall thickness: 1.5 - 2.5 mm.

Pipe bending equipment for working with profile pipes and round pipes, pipe bender for steel pipes. Intended for the production of decorative metal elements directly on construction sites. It is relatively easy to operate and easy to maintain. It is one of the most popular models of pipe benders.

Minimum bending radius: 350 mm; Wall thickness: 1.5 - 3 mm.

Delivery options:
PIPE BENDER TR-03 (380 V):	81,000 rub.
PIPE BENDER TR-03 (220 V):	96,000 rub.

Description of equipment

TRS-32 is a new mobile technological equipment that allows complex bending operations with various types of pipes and profiles. This machine model is designed for bending pipes made of stainless steel, ferrous and non-ferrous metals by rolling around a block. The deformation of the pipe during operation of the machine is minimal. You can work with galvanized, polymer-coated, profile and other pipes, as well as long products. The best price-quality ratio.

RUB 130,131

Manual mandrelless pipe bending machine ERCOLINA MEDIBENDER MD083 (up to Ø 35 mm). The pipe bender is equipped with a single-phase motor with double electrical insulation. It takes only 9 seconds to bend an angle up to 90°. The bending device has an electric engine braking system. For ease of operation, it is possible to use a tripod to install the pipe bender. The bending angle from 0° - 180° is set by a digital control device

Section: Ø 5 - 35x2.5 mm; Maximum bending angle: 180°.

168,000 rub.

RUB 170,516

Quick engagement/disengagement of the clamping bar. Electromagnetic filters in accordance with EC standards. Special shaft for radii less than R 36 mm.

Section: Ø35x1.5 mm; Electric motor: single phase: 200 / 220 V, 4 A, 800 W.

198,000 rub.

Our machine-building plant offers you TRS-35 - technological equipment that allows you to carry out complex bending operations with various types of pipes and profiles. This machine model is designed for bending pipes made of stainless steel, ferrous and non-ferrous metals by rolling around a block. The deformation of the pipe during operation of the machine is minimal. You can work with galvanized, polymer-coated, profile and other pipes, as well as long products. The best price-quality ratio.

Diameter of bent pipes: 3/8" to 1 1/4" (9.5-42.3), inch; Rotation speed of the bending tool: 2.8 rpm; Maximum bending angle: more than 180º degrees.

237,000 rub.

Maximum diameter of processed pipes: 150 mm; Minimum bending radius: 400 mm.

RUB 245,902

The pipe bender is equipped with a single-phase motor with double electrical insulation. It takes only 6 seconds to bend an angle up to 90°. The bending device has an electric engine braking system. For ease of operation, it is possible to use a tripod to install the pipe bender.

Section: Ø 5 - Ø 35 mm; Digital bending angle adjustment: 0° - 180°; Electric motor: 900 W.

RUB 282,000

The TRS-65 machine is designed for bending water and gas pipes (GOST 3262-75), stainless steel pipes and welded pipes by rolling around a block. Bending is carried out in manual and automatic modes.

Diameter of bent pipes: 1/2 - 2, inch; Bending tool rotation speed: 4 rpm; Maximum bending angle: 180 degrees.

RUB 376,931

Large selection of bending radii from R10 to R300. In case of a stop, the machine is equipped with a flashing overload indicator light. For a repeatable sequence of bends in different planes, the machine can be equipped with a two-axis positioning device. The bending system is electronic. Repeatability and accuracy are ensured by smooth adjustment of the bending angle.

Section: Ø 5 mm. - Ø 48 mm; Maximum bending angle: 180°.

RUB 445,551

Easy use of the microprocessor thanks to the touch keyboard. Quick tool change (mold and clamping bar) within 5 seconds. Ease of movement thanks to wheels built into the design of the machine. Maintenance-free, powerful and quiet induction motor (no carbon brushes to replace!) with electromagnetic brake for maximum precision.

Maximum bending angle: 180°; Electric motor: 1.1 kW; Bending speed: 2 rpm; 4 rpm; 2 rpm

RUB 627,320

Quick tool change (die and clamp) within 5 seconds. Easy to move thanks to built-in wheels. Low maintenance, powerful and quiet induction motor with electromagnetic brake for maximum precision.

Maximum bending angle: 180°; Rotation speed when bending: 2-3 rpm; Voltage: 100 - 230 V, 220 - 400 V.

RUB 817,097

Microprocessor-based data management via a menu system that facilitates the selection and use of all machine functions, including self-diagnosis of faults, language selection and programming. Easy to move thanks to built-in wheels.

Maximum bending angle: 180°; Bending speed: approximately 2/4 rpm;

RUR 882,197

Two bending speeds. Microprocessor electronic control with battery backup for data storage, capable of programming 270 bending angles, including the springback angle (related to the flexibility of the material), divided into 30 blocks of 9 bends each. The machine can be equipped with an additional two-axis positioning device to obtain a repeatable sequence of bends in different planes.

Minimum diameter: Ø 5 mm; Minimum bending radius: 2 x Ø mm; Maximum bending angle: 180°; Bending speed: approximately 2/4 rpm.

RUB 897,454

RUB 1,030,277

It only takes a few seconds to change the bending equipment (die and clamp). The advantage of the machine is the ability to use a mandrel bending system, as well as being equipped with a table with the possibility of two-coordinate positioning. The use of an inverter system allows you to smoothly change the bending speed (some models are equipped with two bending speeds).

Section: up to Ø 76 x 6 mm; Minimum diameter: Ø 5 mm; Minimum bending radius: 2 x 0 mm; Maximum bending angle: 180°.

RUB 1,035,524

Manual center roller positioning with patented gearbox for MR2 and MR3 models. Threaded shafts with micrometric flange adjustment help eliminate the need for gaskets. Manually operated anti-torsion correctors for MR2 and MR3 models. Forged roller shafts, heat treated and calibrated, in nickel chrome steel to minimize distortion. Low voltage (24 V) remote control unit with touch panel. Programmable electronic control unit for central roller positioning with storage of 8 individual programs (in one or several passes), for models H2 and H3.

RUB 2,278,152

Soft touch control panel built into the machine body. Multifunctional menu for programming multiple bending angles and pre-mandrel return. NC1 Computer numerical control for the rotation axis of the matrix.

Maximum bending angle: 180 degrees; Maximum cross-section diameter: Ø 76 mm.

CE100H3-RLI. Drive of three rollers - hydraulic positioning of the central roller - forged steel shafts Ø 100 mm. Installation of equipment for bending beams of I- and H-shaped profiles is provided.

Roller shaft diameter: 100 mm; Diameter of standard rollers: 310 mm; Operating voltage: 220/240 - 380/440 V.

CE70H3-RLI. Drive of three rollers - hydraulic positioning of the central roller - forged steel shafts 70 mm. Lateral hydraulic pressure rollers for three-axis control (RLI).

Shaft diameter: 70 mm; Diameter of standard rollers: 245 mm; Operating voltage: 220/240 - 380/440 V.

The TG-3 machine works on the principle of rolling a pipe around a block. Pipe bending is carried out in single and automatic (serial mode). The system is trainable, i.e. By bending one pipe, you set the extreme points for bending the next pipes. You can switch to automatic mode. The pipe bending machine is equipped with an electronic counter, which allows you to quickly adjust the amount (angle) of rotation of the block. The standard set consists of four replaceable jaws (for bending round pipes). Made in China.

Maximum wall thickness: 2.5 mm; Motor power: 3 kW.

Manual

PROMOTION! Hurry up to buy before December 30, 2019

On a pipe bender "Jock"

The universal machine MB32-25 allows you to bend pipes according to a template with a bending angle of 0-270º in several planes. The MB32-25 pipe bender is a mobile machine with low weight, which, thanks to the template, ensures the accuracy of bending the workpiece. It has proven itself as a reliable device for bending pipes made of various materials, including ferrous and non-ferrous metals. The low cost of manufacturing bent profile parts using this equipment ensures the profitability of one-time work and small-scale production in workshops, forges and in private households. The set of mandrels makes it possible to work with pipes with a diameter from 1/2" to 1".

Maximum bending radius: 25.4 mm; Maximum bending angle: 180º.

In the MB series of bending machines, the manual pipe bending machine MB34-50 can be considered one of the most powerful universal devices for bending pipes and rods made of steel, copper, and aluminum. Bending is performed according to a pattern of a given radius, ensuring the required bending angle accuracy. The machine makes it possible to bend the workpiece in different planes. The MB34-50 universal pipe bender is equipped with a lever mechanism to increase pressure when working with large diameter pipes. Ideal for use in small-scale production or private households. Convenient for performing one-time work on processing profiles and applicable in small-scale production. You can buy a manual pipe bender at the manufacturer's price.

Maximum bending radius: 12.7 mm; Maximum bending angle: 180º.

Description of equipment

Manual pipe bending machine MB33-15 is a reliable mobile (due to its low weight) device for bending round pipes made of steel, copper, aluminum and other materials at an angle of 0-180º with a given accuracy. Makes it possible to bend the workpiece in different planes. The machine has a robust design. Suitable for equipping small-scale production, forges, auto repair shops. The MB33-15 universal pipe bender is purchased by individuals to work with pipes in a garage or country house. It is equipped with mandrels for working with pipes of different diameters.

Maximum bending radius: 12.7 mm; Maximum bending angle: 180º.

Roller

PROMOTION! Hurry up to buy before December 30, 2019

Works with profile pipes from 10 mm to 40 mm and with round pipes up to a diameter of 30 mm. The delivery set includes adjustable rollers for profile pipes up to 40 mm. We make rollers for round pipes to order. A universal domestic pipe bender with great capabilities: adjustment of the minimum bending radius, easy adjustment to different sizes of processed pipes, quick change of rollers.

Pipe wall thickness: 2-2.5 mm; Maximum pipe size: 40x40 mm.

PROMOTION! Hurry up to buy before December 30, 2019

Pipe bender MTB10-40 or Chinese designation TR-40. Entry-class manual universal pipe bender. Currently produced in our factories. Redesigned and improved characteristics in terms of strength and workmanship. Previously produced by Chinese companies and massively imported into the Russian Federation. It is used in the manufacture of metal structures from profile pipes in workshops and private households. Used for making canopies, canopies, railings and greenhouses from bent profiles. The delivery set includes adjustable rollers for bending rectangular pipes ranging in size from 15x15 mm to 40x40 mm. Repairable, easily disassembled to replace components.

Maximum size of steel sheet: 40x40x1.5 mm; Minimum bending radius: 170 mm; Minimum bending diameter: 450 mm.

A manual pipe bender is a universal machine for bending profile and round pipes made of steel and non-ferrous metals.

Minimum bending radius (Strip): 254 mm; Machine drive type: manual.

The TR-01 profile pipe bender is designed for bending profile and round pipes manually. Using this pipe bender, you can make any decorative metal products right on the installation site. This makes the TR-01 pipe bender indispensable in construction.

Dimensions for bending round pipes: Ø25 - Ø35 mm; Profile pipe dimensions: 10x10.15x15; 20x20; 25x25; 30x15; 40x20; 40x30;40x40 mm; Minimum bending radius: 350 mm; Pipe wall thickness: 1.5 - 3 mm.

The machine for manual bending of round and square pipes is mainly used for bending water pipes on site.

Wall thickness of rolled pipes: 0.8 - 1.2 mm; Diameter of round pipes: 3/8″ - 7/8″; Square pipe diameter: 3/4″, 1″; Maximum bending angle (special attachment required): 180°.

PROMOTION! Hurry up to buy before December 31, 2019

On a pipe bender "Jock" You can work with profile pipes up to a maximum of 50x25x1.5 mm. The machine kit includes rollers for round pipes with a diameter of 20, 25, 30 mm. For rolling strips “on edge” 20x4 mm.

Maximum diameter of round pipe: 30mm; Pipe wall thickness: up to 3 mm.

Maximum bending radius: 25.4 mm; Maximum bending angle: 180º.

Maximum bending radius: 12.7 mm; Maximum bending angle: 180º.

PIPE BENDER TR-03 (220 V): 96,000 rub.

168,000 rub.

Roller semi-automatic profile bender TR-05 is designed for bending products of various profiles, including round and profile pipes made of steel and aluminum. The machine has a vertical bending mechanism, equipped with two rollers and an electric drive. It is possible to change the rollers (equipped with a set of rollers). The semi-automatic operation mode with the reverse option is set from the control panel. A universal domestic pipe bender with great capabilities: adjustment of the minimum bending radius, easy adjustment to different sizes of processed pipes, quick change of rollers.

Maximum diameter of processed pipes: 150 mm; Minimum bending radius: 400 mm.

237,000 rub.

The semi-automatic machine TR-05 for bending round and profile pipes made of steel and aluminum is equipped with two drive rollers with two reversible electric drives. Synchronized drives are controlled by a controller. The movement of the central roller up and down is controlled by the same controller of the machine control unit. In automatic mode, the operator sets the rolling points to the software block and the pipe bender rolls the pipe automatically.

Maximum diameter of processed pipes: 150 mm; Minimum bending radius: 400 mm.

RUB 897,454

Roller shaft diameter: 40 mm; Diameter of standard rollers: 165 mm; Operating voltage: 220/240 - 380/440 V.

RUB 1,035,524

Roller shaft diameter: 50 mm; Diameter of standard rollers: 178 mm; Operating voltage: 220/240 - 380/440 V.

Maximum bending radius: 12.7 mm; Maximum bending angle: 180º.

When carrying out plumbing work, a hydraulic pipe bending machine with beam-type blocks is widely used. It is necessary for working with metal pipes directly on the construction site and in the open air. This machine helps to significantly reduce the time required to complete the work. Manual and electromechanical roller pipe benders are also widely used in construction. With their help, it is possible to produce metal structures of various shapes and sizes.

The pipe bending machine that you use when installing various systems, in some cases allows you to avoid welding work. Avoid purchasing components: fittings and bends. At the same time, the number of joints becomes smaller, and the quality of work improves.

When selecting a pipe bender, you need to consider what productivity is required and what operations the pipe bending machine will perform. Today the market offers a huge number of options. By and large, they are all designed to perform the same tasks. The deciding factors when choosing will be the price and technical parameters of the machine. In this case, it is better to entrust the selection of equipment to a specialist. We manufacture pipe bending machines ourselves and have on our staff engineers and designers with extensive experience in production.

A pipe bending machine used for bending profiles, the so-called profile bender, is designed to work with rectangular and square pipes, strips, channels, angles, and other complex profiles. Replaceable attachments (rollers) are used to process complex products to obtain the required radius. Their shape and size guarantee the specified bending parameters of the resulting part.

In order to make the right choice, you must remember that such machines come in different types: manual and electromechanical, hydraulic and mandrelless. They differ from each other in processing methods and pipe rolling method. First of all, profile pipe benders differ in the size of the material they are capable of processing. There are pipe benders that can withstand heavy loads and work with pipes up to 100x100 mm in size with a wall thickness of 5 mm.

To choose the right pipe bender, decide what pipes you will be working with. Decide whether it will be a universal or professional machine? What performance should it have? How many parts will you make per shift? Or maybe you need a pipe bending machine for a small workshop? With us you will choose a reliable and high-quality machine.

Manual pipe benders: scope of application

Manual profile pipe bender can be mechanical or hydraulic. A mechanical tool is used if it is necessary to bend a small pipe made of steel or stainless steel.

Manual pipe benders are universal, but can be designed for bending pipes of a certain size. The universal profile pipe bending machine is equipped with rollers for working with pipes of various sizes. Using such a machine you can bend a pipe into an arc or ring.

What are the advantages of manual pipe benders? They are compact, cheap, and easy to move on site and in the workshop.

Roller pipe benders

A roller pipe bender for a profile pipe is also called a roller bender. The bending process is carried out on it using roller rolling technology.

The drive of this equipment can be manual or electromechanical, which determines the performance.

Today, roller pipe bending machines with three rolls are the most common; in them, the bending process is carried out by rolling between three rollers. One or two of them are driven rollers and move the product. The bending radius is determined by the location of the rollers.

Mandrel pipe benders

Mandrel pipe bending machines are the most complex in design and expensive in price. A mandrel is a guide that is inserted inside the pipe to avoid wrinkles at the bend.

The mandrel pipe bender is the most common machine in mechanical engineering and in the mass production of highly complex products. It is these machines that provide maximum repeatability and geometry accuracy. The quality of bending without ovality and the formation of corrugations is ensured precisely by the use of a mandrel.

A mandrel pipe bender for radius bending makes it possible to bend pipes with a small wall thickness. High-quality bending of thin-walled pipes to small radii is completely impossible without the use of a mandrel pipe bender.

Electromechanical pipe benders

Electromechanical pipe benders bend pipes using directed pressure. These stationary devices are used in mechanical engineering, various construction and repair work and are ideal for intensive industrial use.

An electromechanical pipe bender is a machine that is perfectly suited for bending pipes made of steel, copper, aluminum and thin-walled steel with a diameter of up to 150 mm. Profile pipes can also be easily bent using such pipe benders. They allow you to bend pipes without deformation, ensuring high accuracy of the angle and bending radius.

An electromechanical pipe bender for steel pipes can be used with fairly large diameters, and the worker’s efforts consist only of changing workpieces and setting settings.

Features of hydraulic pipe benders

Hydraulic pipe benders are either manual or electric. They belong to the category of professional equipment and are often used in the installation of water supply systems for buildings. An electro-hydraulic pipe bender easily bends a large volume of pipes.

The main advantage of a hydraulic pipe bender is that it is unpretentious and is very widely used in construction. Using it, you can bend a steel pipe with a diameter of up to 3 inches, without much physical effort.

The hydraulic pipe bending machine has a durable body that protects its mechanism from damage. Reliable and easy to use device.

Mandrelless pipe benders

The mandrelless pipe bending machine can be manual or electromechanical. As a rule, it is equipped with mandrels for a wide range of pipes from half an inch to 3, and even 4 inches.

When bending thick-walled pipes, such machines show excellent results, with mandrels for pipes from 20 to 60 mm being most often used. You can also order mandrels for working with profile pipes.

Machines using mandrelless bending can bend pipes at an angle of more than 180 degrees.

A mandrelless profile pipe bender can work with pipes made of steel, copper and brass with a wide variety of profiles. In this case, the minimum bending radius is about three pipe sizes. Mandrelless machines can be automatic or semi-automatic.

In this section of the catalog you will find machines for working with round pipes. When choosing, focus on such an indicator as power. The more powerful the equipment, the higher its cost, but at the same time the productivity increases. Choose the power of pipe benders based on how much rolled steel you need to process per day.

Advantages of hydraulics and pneumatic hydraulics

Accuracy: you set the bending angle, the automation accurately reproduces it, the error is insignificant.
Guaranteed strength: no corrugation is created during bending, the rolled product retains its structure and strength indicators.
Speed: Automatic devices are much faster than mechanical or manual models and are suitable for industrial applications.

Our company acts as the official representative of such brands as Stalex, Proma and FBM. In the catalog you will find devices for working with pipes of different diameters: 15, 20, 35 mm and more. They can be designed for bending products made of different alloys: steel, aluminum, copper, brass. In addition to the manual models available, we also offer partially or fully automated systems that increase bending accuracy and speed.

Place your order online and we will quickly deliver it to any region of the Russian Federation!

A word of 8 letters, the first letter is “T”, the second letter is “R”, the third letter is “U”, the fourth letter is “B”, the fifth letter is “O”, the sixth letter is “G”, the seventh letter is “I”, the eighth letter is “B”, the word starting with the letter “T”, the last “B”. If you don’t know a word from a crossword or scanword, then our site will help you find the most difficult and unfamiliar words.

Guess the riddle:

This animal lives only at home. Everyone is familiar with this beast. He has a mustache like knitting needles. He sings a purring song. Only the mouse is afraid of him... Did you guess it? This is ... Show answer>>

This stone circle is Tools' best friend. It will whirl up sparks above itself, and make something that is dull sharp. Show answer>>

This horse doesn't eat oats. Instead of legs there are two wheels. Sit on horseback and race on it, but it’s better to steer. Show answer>>

Other meanings of this word:

Scanwords
Crosswords
Keywords
Sudoku
Scanword search engine
Crossword Dictionary
Solve anagram online
Anagram Solver Helper
Online game “Remember the numbers”
Online game "Accountant"
Funny jokes
Puzzles
Did you know?

Random joke:

Yalta conference. At the table are the heads of the three allied powers - Churchill, Roosevelt and Stalin. They talk about the situation at the front, then pour out Armenian cognac and drink a glass. Roosevelt puts out a silver cigarette case, on the lid there is written in gold thread - “To T. Roosevelt from friends in the party on the day of his 40th anniversary.” He gave his colleagues a drink, we smoked, we talked.... then again we had a drink. Churchill takes out a silver, gilded cigarette case decorated with amber. There is an inscription on it - "to Sir W. Churchill from His Majesty King George for services to the Crown." We smoked and drank again. Stalin takes out a cigarette case - massive, gold, inlaid with emeralds. On it there is an inscription in large diamond script - “To A.S. Pushkin from Prince Vyazemsky”...