Do-it-yourself jumpsuit for a dog - patterns, measurements, step-by-step instructions. The simplest patterns of overalls for dogs DIY clothing patterns for dogs

Today there are hundreds of breeds in the world, many of which are not at all adapted to the harsh climate. This is especially true for small pets (for example, Yorkshire Terrier or Chihuahua) and short-haired dogs (Doberman, Dalmatian, etc.). It is not surprising that owners try to protect them from the cold by wearing all kinds of jackets, overalls or vests, often resembling a smaller copy of human clothing. However, buying them ready-made can be very problematic, because stores don’t always have the required sizes, so in such cases, all that remains is to sew clothes for the dog with your own hands, having previously developed a pattern taking into account all its parameters.

What will you need?

Before moving on to the active stage of work, you need to choose the material for the future overalls. In this matter, you should give preference to a lightweight fabric that has a water-repellent effect and a tight edge, which will help save time on processing seams.

Of course, your dog may have several options for outerwear in her wardrobe, but if this is not the case, then you need to try to make the product as universal as possible (for any weather). To do this, in addition to the material for the top layer, you need to prepare a warmer underlay.

Important! If your dog constantly participates in exhibitions, then you know how important it is to properly care for its coat, soit is better to choose a material with a smooth texture (for example, viscose or silk),so that the fabric does not tangle or damage the hairs.

• zipper (it is most convenient to use a tractor type, especially since it has a high level of reliability and wear resistance, so you do not need to worry about mechanical damage to the teeth or other damage);
• elastic band (give preference to a product that is round in cross-section: it is more convenient to adjust and it stretches less);
• fastener on the collar (choose at your discretion: Velcro, button or button).

How to take measurements of a dog?

When you have decided on the fabric and model of the future overalls for your dog, it’s time to move on to taking measurements, since it’s unlikely to be possible without a life-size pattern.

It is necessary to draw out the entire sheet with such cells (for small and medium-sized dogs, a piece of paper or a piece of wallpaper will be enough), preparing a simple diagram of the future product.
Having completed this task, we move on to measuring the circumference of the neck (denoted as K-D), the front (L-I) and hind legs (M-H), the volume of the animal’s hip (F-B), as well as the place where the front paw becomes the shoulder blade (G-D).

Don't forget to measure your waist circumference (A-B) and chest circumference at the deepest part of your chest (D-C). And finally, we measure the circumference of the tail in order to subsequently make a hole of the required size (F-W).

Important! EIf you are not a professional and are sewing overalls for the first time, first make a trial version using old material (for example, an unnecessary sheet).

To create a pattern for a regular jumpsuit, these measurements will be quite sufficient - provided that you are more interested in a comfortable fit and not in the presence of pockets in certain places or any other additions that require other measurements.

All measurements obtained should be transferred to paper, connecting the points together. In the upper part, you need to add 30 mm to the measurements for the back of the animal.

Making a pattern with your own hands

It should be noted right away that as a result of cutting the paper pattern, you should end up with several separate parts: a pattern for the back, tummy, chest, sleeves and hood (if you are going to add it to the product).

If you are going to sew a product from only one type of fabric, which is easier, separating the pants from the chest is not required. But if you have two types of fabric, and you want the jumpsuit to consist of two parts, then on the largest paper part (the back) you need to draw a dividing line using a ruler (starting at the bend on the belly side and going up).

Important! You only need to apply allowances, as well as cut fabric, along the line of the former fold, since the rest of the part has already been cut from another material.

If you have it consisting of two colors, then in the finished form you should get two patterns of each of them (before applying the paper cutting, you need to fold the fabric in half). Now we again take the paper pattern of the back and bend the folded part to make a pattern of a different color from it.
We attach it to the fabric with pins and outline it with soap, leaving the same allowances of 1.5 cm.

As a result, you will have two separate pieces of “paper back”. Now, using the same principle, we cut the breast and sleeve from the fabric. As for the latter, often on the pattern the part that goes to the tummy turns out to be narrower at the bottom than the part that goes to the back, so it is advisable to equalize them.

Having placed two sleeve parts side by side on one double fabric, step back 1.5 cm on the sides and 2 cm on the bottom and cut out the part (along the perimeter, without cutting the fabric into two parts, like a paper pattern).
You should also cut out a strip for the lock as a separate element so that the slider does not pull in the dog’s fur. The length of this strip should be equal to the length of the chest minus one centimeter. Again, fold the fabric in half and draw out a rectangle 3-3.5 cm wide. After adding allowances, you can cut out this part as well.

All the details are cut out from the lining in exactly the same way (you must first fold the fabric in half), only when cutting the sleeves you do not need to leave allowances for the hem, but simply trace the existing pattern, folding the lower part. We do the same with the pants pattern, leaving no allowances.

Did you know? Dogs can recognize up to 250 words and even count up to 5. Their intelligence is at the level of two-year-old human children.

When cutting out the back, there is no longer any need to separate part of the pants and the chest and we simply trace the part around the entire perimeter, retreating 1.5 cm everywhere, only leaving no room for hems in the lower part. In order for the hood to be fastened, we additionally cut out a strap from the fabric (a rectangle measuring 3x4.5 cm + allowances).

Sewing overalls

When you already have all the components of the future jumpsuit, all that remains is to sew them together. Let's start, perhaps, with the easiest thing and sew our strap onto the hood and the locking bar.

This needs to be done only on two sides: top and bottom, so that later you can turn the part right side out and smooth it out thoroughly. We take out the corners of the inside-out parts with a needle, only carefully so as not to pull out the stitching threads.

We sew the finished and ironed elements around the perimeter again, leaving only the cut side untouched (the fold, top and bottom are processed). We take the parts for the hood and manually connect them, after which we sew everything along the same seams using a machine. The front part can be sealed with several lines, or it can be supplemented with a fur strip.

We cut off all processed indents, leaving only half a centimeter after the stitching. Then we turn the hood inside out and iron all the allowances towards the central part. All that remains is to do the decorative stitching, retreating 1 mm from the edge of the seams (set the machine mode to 4).

Now it’s time to sew the back and panties (an option when the pattern of overalls for a dog was made taking into account the use of two types of fabric), which is also easy to do with your own hands, following the given step-by-step instructions.
We place these two parts with the right sides facing each other, stitch them down, retreating 1.5 cm from the edge, cut off the excess parts, iron them and perform a decorative stitch along the front side. When the back of the future garment has become a single whole, we attach insulation to it (from the wrong side) and baste it.

We do the same with the sleeves, and if some part of the insulation has come out, you can always trim it. When the insulation has taken its place on the largest part of the pattern (back + panties), we proceed to sewing the latter: we bring together the side seams of each part (the insulation should be on the outside) and grind them down, retreating 1.5 cm from the edge.

Important! When doing machine stitching, try to grab the insulation only along the very edge, and if it comes out more, cut it off with scissors so that it does not thicken the legs.

There should be 2 cm of fabric left at the bottom for hemming, so if the padding polyester gets within this distance, it also needs to be cut off. Ideally, you should press the seam on the legs so that there are no bulges when processing the sides.
Now we sew the sleeve to the back, just do not confuse the line going to the stomach with the line going to the back (the one above). Having sewn one, we do the same with the other, not forgetting to cut off the excess fabric and padding at the allowances.

We iron the allowance towards the sleeve and next to the main seam we make decorative stitching on the sleeve side. Next, we connect the sleeves to part of the breast. The seams need to be sewn, retreating 1.5 cm from the edge. Having completed this task, we turn everything inside out and move on to connecting the sleeve seam with the side seam.

Important! Do not overstitch where the side seam passes.to the edgebreasts 1.5 cm and insert the elastic (simply sew it on the indicatedfrom the edgedistance along with the side seam).

Processing the sleeve seam (we step back 2 cm from the edge) is done by stitching the corner diagonally (not along the perimeter, but slightly at an angle). When folding the sleeve, this will help the adjacent seams fit together more accurately.

Having sewed all the parts to each other, you need to reduce the allowance along the entire perimeter of the product to 1-1.5 cm. You can also process the seams with a zigzag. For greater convenience, we make several notches in the place where the sleeve is sewn to the part of the body (this will make the sleeve softer and there will be no folds on the front side).
Having turned everything inside out, we iron the seams again and sew on decorative elements: emblems, buttons, buttons, etc. It is important to do this before the lining is sewn on.

Let's move on to connecting the lining parts. We sew the pants in the same way, and then connect part of the back with part of the sleeve and tummy. If you have chosen a smooth material for the lining, then we additionally process the seams using an overlocker.

Fold the side seams (sleeve seam and side seam). On one side we sew the stitching without adding 1.5 cm to the end (as was done with the main fabric), and on the other we stitch only the edges, leaving a hole for turning the overalls inside out.

Now we take the hood and turn it inside out with the side that should later be in the middle. We sew the front parts of both parts together at a distance of 5 cm from the edge, thus aligning the edge of the overalls with the edge of the front part of the hood.
Then we take the lining and, turning it right side out, sew it to the inside front of the hood. Similar actions are performed on the other side (5 cm from the edge).

After the corners of the overalls are connected to the lining, take the latter and connect it to the inside of the overalls - right sides facing each other. As a result, the inner part of the overalls must be sewn to the lining, and its outer part must be sewn to the product itself.

Sew the strap to the hood, leaving 1 cm from the edge and leaving 1 mm at the bottom.

Time to move on to the zipper. If necessary, it must be shortened so that 1.5 cm remains at the bottom and top (seam allowances). Open the zipper and sew it to the parts of the breast (teeth facing out) so that there is about 2 cm left to the edge. A restrictive strip is sewn on top of one part of the zipper, which is used to prevent wool from getting into the slider (the connection is made in the same seam as the zipper was sewn on, but does not reach its edge).

The entire structure is covered with a lining and stitched again using the same seam. Be sure to trim the seam allowance and fold it toward the breast. The top edge of the zipper also needs to be folded and only then stitched all the way to the end.

Similar actions are performed on the other side: lifting the lining, the zipper is laid with its teeth outward (the slider on its front side should look down).

On this side, the zipper at the top is sewn on top of the already attached tab on the hood. Now we cover the lining and sew it along the same seam. Once the zipper is secured, take the edges of the elastic (so it can taper) and pin it to the zipper seam (it should extend 1.5cm from the edge to allow the seam to contract).
We do the same on the other side.

Having secured the elastic on both sides so that it can later be stretched and sewn, we make a stitch along the zipper, moving to the hood, at the same time sewing its upper part and moving to the second part with the lock.

To complete the task, it is better to use a special zipper foot.

If you have sewn everything properly (you can verify this by slightly turning the overalls), cut off the parts of the fabric protruding above the seams, leaving only 0.5 cm, and make notches in the places where the hood bends.

Now we will sew on the hood. To do this, turn it inside out and tuck it inside between the lining and the main part of the product. We turn out the corners on both sides and connect the two parts of the hood, sweeping them together. In this case, you need to make sure that all its seams match.
Next, we look for places to sew the lining to the main part and, stepping back 5 cm from the edge (exactly at these marks), we begin to sew the hood to the fabric. Be sure to make sure that it lies evenly and there are no unsightly irregularities (all layers should be pulled together). Also, before stitching the seam, be sure to mark the center of the hood.

Finally, we manually sew the lining to the already basted parts (hood and main part), and after machine stitching we trim all protruding parts closer to the seam line, leaving about 5-7 mm.

In places of strong roundings, make notches so that the hood fits more smoothly. We turn the product over to the front side, and, stepping back from the joining line about 0.5 cm, fasten the internal seam allowance, having first pressed it down (first by hand basting, and then by running a stitch along the entire lower part).
To make the result better visible, iron all seams.

Did you know? The only church for dogs is in the USA, where it was built in the 19th century by artist Stefan Hanek. This is how he expressed his gratitude to his own five Labradors, who helped him overcome a serious illness.

When the upper part is ready, turn the lining inside out again (lifting it up) and process the edges of the pants. We fold the front part of the pant lining with the front side of the main material, and then put each pant leg from the lining onto a similar part of the main material (just turn it inside out).

The seams on both materials must match. When combined correctly, the front of the lining will be underneath and adjacent to the front of the main fabric. To prevent the seams of the trousers from moving out, it is better to pin them with a pin.
For greater convenience of work, you can tuck the sleeves and all unnecessary parts inside, leaving only the side seam of the overalls that has not yet been sewn. We combine the cuts on both types of fabric (on both sides) with each other and chop them off. At the same time, the lock strap should be moved a little higher so that it does not interfere with work.

Important! It is better to first secure the chest part, stretching the elastic band along the way, and only then move down to the pants.

Once you have basted all the pieces in a circle, sew a stitch and cut off the excess, leaving only 0.5 cm from the seam. Next, on the sleeve we find the hole left earlier and carefully turn the entire product through it, then tucking each part into the place reserved for it.

We smooth the edge of the overalls with an iron and, stepping back 0.5 cm from it, we lay a decorative circular stitch (through the hood), and we sew the parts with the elastic in a zigzag. At this stage, all that remains is to hem the overalls from the bottom, process the sleeves and legs, and also sew Velcro onto the hood.

Let's start with the pants. We turn the legs inside out and, having secured the lining with padding polyester, we fold in the remaining part of the main fabric, sewing holes for the legs in a circle. Having finished with the legs, we move on to the sleeves.
First, let's sew up the hole through which we turned our overalls inside out. To do this, we turn the fabric allowances inward, baste the two edges of the material, and then stitch them on top.

We move to the outer part of the sleeve and sew on the lining so that later we can fold the allowances of the main fabric and sew the holes in a circle. Try to make sure that the lining does not stretch, but protrudes slightly beyond the inner seam of the hem, otherwise, when the dog moves, unsightly folds will appear on the outer part of the overalls.

Sew more Velcro onto the hood and that’s it - you have ready-made clothes for your pet.

To sew a T-shirt for your dog, you will need to take standard measurements using a measuring tape.

Chest girth is the circumference at the widest point of your dog's chest. The neck circumference must be measured where the collar is located. Length - the distance from the neck girth line to the base of the tail. Record all measurements. These are the main measurements you will need when using free dog shirt pattern and sewing. You can also scale the pattern down or up based on the size of your dog. We will sew such a mischievous T-shirt for our pet.

I recommend using lightweight, stretchable fabrics to keep your dog comfortable and comfortable. You don't have to buy fabric at the store; your old T-shirt or turtleneck can be used. You will need two pieces for the dog tank top pattern: the front and the back.

Sew the side and shoulder seams of the front and back. We make a hem for the bottom of our T-shirt. To process the neckline and armholes, you can use binding made of the same material or stretch tape, which is sold in fabric stores. We got such a cute T-shirt for our pet. The front of the shirt is slightly shorter than the back. This is due to the structure of the dog's body.

In inclement weather, people bundle up in warm, comfortable, waterproof clothing that is comfortable and in line with fashion trends. Our faithful, devoted little brothers - dogs - suffer no less than us from heat, wind, and bad weather. Being responsible for those who were taken into the family and tamed, we take care of our four-legged friends, worrying about their health and well-being. Do-it-yourself clothing for dogs, the patterns of which are modeled taking into account the parameters of your pet, will warm you up in cold weather, hide you from the rain, and highlight your pet’s stylish, fashionable “outfit.”

The quality of a dog clothing pattern largely depends on the correctness of taking measurements. Then the process of designing and modeling outfits with your own hands will require perseverance, attention and drawing skills from you. Transferring the finished pattern onto the fabric will not be difficult, and the main point at this stage will be the process of choosing the material. Don't forget about the accessories: zippers, fasteners, Velcro, finishing tapes and elastic bands are present in most models of clothing for dogs.

How to take measurements correctly

To ensure that your hand-made clothes fit your dog perfectly - without restricting movement or rubbing the skin - consider the main rules for measuring your pet:

• All measurements are taken in a standing position.
• In order for the parameters to be correct and the pattern to follow the contours of the dog’s body, it is necessary to take measurements in the widest places:
  • neck circumference is equal to the volume of the collar;
  • chest volume is measured directly behind the front paws;
  • The length of the back is determined by the distance from the withers to the base of the dog's tail when standing.
• Don't forget to add 1 to 3 cm to the pattern when cutting the material: this will be seam allowances and the loose fit of the garment.

Material selection

The summer heat is not the best reason to dress up your beloved dog in a variety of clothes. Give your four-legged friend the opportunity to breathe freely and not overheat. On a cool evening, cotton, knitted T-shirts and T-shirts are perfect. The spring-autumn season brings inclement, rainy weather, so waterproof bologna and raincoat fabric will be available during this time.

To keep your dog warmer, wear a jumper or sweater underneath, knitted by yourself, in the threads of which the proportion of wool or cotton should be at least 40%. Natural or artificial fur, fleece, padding polyester (as the lining of overalls) will reliably protect your pet from frost and snow. Use woolen fabrics for coats and drape for sewing outerwear patterns.

Building a basic pattern for modeling and sewing

So that every piece of clothing for dogs with your own hands, a pattern for which you find or design, fits perfectly on your four-legged friend, you will need patience and time:

• Draw a rectangle, one side of which is equal to the length of the garment.
• Set aside the points corresponding to your waist and chest measurements.
• Then you need to mark the width of the back, extending the pattern line.
• Dividing the width of the back into 2 equal parts, we get the intersection point, from which measure 1/3 of the girth of the dog’s neck.
• By connecting the dots in a semicircle, we get the neck line.
• Then you need to construct a shoulder section and calculate the size of the armhole for the dog’s front and hind legs.
• When cutting out clothes with your own hands, do not forget to leave a cutout for the tail.
• To pattern a sleeve, you will need to measure the length of each dog's paw, the volume - along the bones of the upper joint.

Models of clothing for dogs with patterns and job descriptions

Clothing for dogs is not a whim or whim of glamorous young ladies. Decorative babies - toy terriers, Yorkies, chihuahuas, short-haired dachshunds, pinschers and other dog breeds are highly susceptible to the influence of weather conditions. And what can we say about the now popular Chinese crested dogs - graceful, cheerful and funny dogs, whose hair is present only on the head, ears, tail and paws, and the body is freezing.

Rain or snow, frost, strong wind can cause hypothermia in a small family pet. Warm clothing will protect you in bad weather; elegant models will emphasize the exquisitely glamorous image of the dog. Treat yourself and your little friend with a collection of clothes created with your own hands using patterns and templates. The trends of the 2019 season in the world of dog fashion remain plaid fabrics and materials with graphic prints. Do you want to create bright outfits with your own hands? Sew clothes for your favorite dog by developing a pattern and cutting the fabric according to your pet's measurements.

So, the wardrobe of any self-respecting dog - from a Pekingese to a German Shepherd - should include:

• Overalls for snowy frosty weather.
• A lightweight option for the off-season.
• Waterproof suit.
• Cape/blanket.
• A couple of knitted jumpers and hats.

Other outfits - summer T-shirts, T-shirts, dresses, skirts - are not a necessary attribute of a dog’s life. The presence of fashionable clothes in the summer wardrobe is rather due to the desire of the owners to dress up their pet. You can sew unusual exclusive styles, casual suits for walking, and elegant models with your own hands using the patterns given below. Detailed instructions will explain step by step the main points that are worth focusing on.

How to sew a jumpsuit for a Yorkshire Terrier

To sew this cute, warm overall for a Yorkshire Terrier dog with your own hands, you will need basic measurements of your pet and high-quality material. Clothes are ideal for dry, cool weather. The pattern consists of 4 parts: back, front, sleeves and collar. Bright, beautiful fabric, decorative elements - frills, satin ribbons - will decorate the model. The zipper is located on the back of the garment. It is suitable for playful and capricious dogs who do not like to dress for a long time.

Dachshund blanket

This type of clothing will be worn with pleasure by dogs of the hunting breed in the spring and autumn seasons. The structural features of dachshunds have advantages when hunting, but in cold or rainy weather the paws, lower body, and ears quickly get wet and freeze. A blanket is a universal wardrobe item that provides freedom of movement. If your pet is not accustomed from childhood to wearing clothes sewn from patterns with your own hands, it will be the best option.

The pattern itself is simple, and to construct it, you need to know the length of the back to the base of the tail and the volume of the chest under the front legs. Velcro or buckle closure will help you adjust the fit. The cool season threatens dogs with hypothermia, and a lightweight blanket, hand-sewn from natural fabrics - wool, cotton, absorbs sweat well, protecting the animal from rapid hypothermia in windy weather..

Stylish overalls with a hood for Chihuahuas

These decorative lap dogs are representatives of a “special” caste and are also the tiniest dogs in the world. Brave, playful, they love walks, but often get cold. A warm jumpsuit, sewn with your own hands according to the pattern in the photo, will increase the time the Chihuahua spends outside, and the hood will protect it from rain and wind. A zipper on the back will help you quickly fasten your clothes, emphasizing a stylish look.

Pattern and knitting pattern for a jumper

A warm, hand-knitted sweater for a dog will be an excellent clothing option in cool weather, and will also serve as a good layer under overalls in the winter. Measure the circumference of the pet's neck and body length from the withers to the tail. The first measurement will be needed to cut out the neckline, and the second will be needed to determine the length of the garment. Opt for threads containing at least 40-45% wool so that sweat is easily absorbed and the dog does not freeze during a walk.

Elegant dress for a small dog

Many housewives attend various events - parties, receptions - with their beloved pets. It is necessary not only for a beautiful lady, but also for her dog to look elegant, fashionable, and trendy. Airy tulle, tulle, decorated with sequins will be an excellent basis for creating an elegant dress model. Sewn with your own hands according to a pattern corresponding to the size of your little pet, decorated with decorative elements, the dress will emphasize the glamorous style of clothing, attracting everyone’s attention to the owner and her “friend.”

Scheme for making winter shoes for a pet

To make your own homemade slippers for your dog, you will need thick, non-slip material. When modeling the pattern, measure the size of your pet's paw: this will be the base-sole. Sew stockings made of thinner fabric to it (the pattern for the hind legs should be a few cm above the hock joint). All that remains is to sew fasteners or Velcro in two places: above the paw and along the upper edge of the shoe. The winter option involves the use of warm, waterproof material for the boot, rubberized or leather fabric for the sole.

Warm reversible overalls for large breed dogs

A hand-sewn warm jumpsuit will help protect your four-legged friend from wind, cold, rain or snow. The winter version of the pattern provides for a warm top layer of fabric (drape, cashmere) and internal insulation (fur, fleece, flannel). The pattern is convenient because, depending on the weather conditions, the overalls are worn with one or the other side out.

Video tutorials on sewing clothes for dogs for beginners

Designer collections of clothing for pets, fashion styles and trends, annual shows are not fiction at all. More and more pet stores offer pet owners a varied selection of clothing for all occasions. Sometimes the quality of the presented collections is far from ideal, and standard sizes, colors, and cuts do not impress dog and cat owners. Sew or knit exclusive models with your own hands, investing great love and tenderness for the dog.

Standard patterns, which can be easily found on the Internet, will help speed up the modeling process. Then “adjust” the pattern to the size of your pet. With your own hands you can create clothes for dogs worthy of the title of “masterpieces of high fashion”: light T-shirts and blankets, warm winter overalls and elegant sweaters. By watching our video tutorials, you will learn all about the intricacies of designing, sewing or knitting clothes with your own hands for your four-legged friends.

Today there is a large amount of clothing for small breed dogs on sale, and this applies not only to decorative items, but also to functional ones, which are an integral requirement for keeping such pets. But you can replenish your dog’s wardrobe on your own by sewing the necessary things with your own hands. This will require a minimum of knowledge, material and time.

Photos of clothes for small dogs

Miniature Chihuahuas cannot do without walking overalls in cold weather:

English bulldog in an insulated vest a la down jacket:

Bichon Frize in a stylish denim jacket:

Sports suit for griffons for a walk on a cool evening:

Knitting: Jack Russell Terrier in a cozy vest:

Not only small breed pets should have their own wardrobe. In cold winters, warm overalls will not hurt medium and large dogs, especially smooth-haired ones: boxer, basset hound, great dane and others. It is recommended to purchase or sew these warm overalls for walking Dobermans, Rottweilers, bulldogs and other large dogs in the winter.

Clothing patterns for small dogs

For beginner seamstresses or those who don’t want to spend a lot of time calculating pattern parameters and sewing complex items for a dog, we present a simple way to sew a vest for small pets.

To create a life-size pattern, you need to take the following measurements from the dog:

1. The length of the back is from the tail to the neck.
2. Chest circumference - behind the elbow joint.

Divide the resulting length of the back by 10 - you get the size of the side of the squares that will be used to build the following diagram:

On a suitable sheet of paper, draw a grid with the square size obtained as a result of previous calculations. Draw the back, then move the remaining points across the squares - A, B, C and D. The distance from the top of the back to points B and C should be equal to the half-circumference of the chest.

Please note: the belly is a one-piece piece, and the back will consist of 2 parts.

Having connected the resulting points, as in the figure, you can begin to transfer the resulting pattern onto fabric (fleece works well). It is circled with chalk or soap, observing the following nuances:

• if the sewing machine has a “zigzag sewing” function, then the parts will need to be sewn end to end;
• otherwise, it is recommended to leave seam allowances.

Now you need to sew on a zipper; a plastic one is best for this.

Advice: if the vest is made of fleece, it is better to baste the zipper first, and then only stitch it, since such materials can stretch.

If you plan to make a product with a lining, you will need to use the same pattern to cut out identical parts from the selected material and connect them with similar parts. At the end of the armhole and gate must be further processed.

From the following pictures you can choose suitable patterns for Yorkies, Chihuahuas and other small breeds of dogs:

One Piece Pattern:

All provided patterns can be downloaded for free and printed on whatman paper to fit the size of your pet. If there are no difficulties with the simplest sketches, you can look for more complex options in the Burda magazine.

You can watch how to sew clothes for your pets using ready-made patterns in the following video:

Step-by-step guide to creating a pattern for a Chihuahua and Yorkie

A small breed dog especially needs clothing both in winter and on cool summer evenings. If there are usually no problems with summer T-shirts and shorts, then sewing winter suits the first time can be quite difficult. Therefore, we will figure out how to create a pattern for a future overalls for a Yorkie or Chihuahua. For example, let's take one of the patterns shown earlier:

The step-by-step process of creating it will look like this:

1. Measure the length of the back, which is determined from the neck to the tail. This distance will be the segment AB, draw it on paper first.
2. To find point F, you need to draw a line perpendicular to the first segment equal to the half-circumference of the animal’s chest.
3. G is the end of the segment from point A, equal to the length of half the collar size.
4. E is the half-circumference of the dog’s waist, measured from segment AB.
5. DC is the length from the bottom of the tail to the beginning of the hip (for small breeds it is usually 4-5 cm.
6. The width of the parts for the front and hind legs is measured according to the half-girth of the limbs in the upper and lower parts. The length is determined as desired.
7. To create a breast pattern, the dimensions are taken based on the main part - the length of the segments FE and DC.
8. LengthFF is the distance between the front legs on the chest side, DD is behind the hind legs, CC is under the tail (usually this segment is 2-3 cm).

The pattern is ready, you can transfer it to the fabric and cut it, taking into account 1 centimeter allowances on all sides.

If the owners have a lapdog or, for example, a cocker spaniel, you can also use this pattern, carefully taking measurements of the pet in a standing position.

Pattern of blankets and harnesses for dogs

The pattern of the simplest blanket can be constructed according to the following scheme:

AB – length from neck to tail, collar BAB – neck circumference.

To sew a blanket, connect the back and collar along the BAB line. Please note that identical points on different parts must match. Sew the collar into a ring, and sew a belt to it. The T-shaped part should cover the pet's back. For convenience, some sew a loop for the tail at point B.

Using a similar principle, you can create a harness pattern for miniature breeds, the diagram of which is shown in the following figure:

After sewing it, you can attach suitable fasteners, such as Velcro, to the ends.

Clothes for your pets should be chosen from fabrics that are easy to wash and easy to care for. Single-layer sweaters and overalls are suitable for autumn, and suits with an insulated layer for winter.

For decorative clothing, you can use any fabric, the main thing is that the item is tailored to size and does not rub anywhere. When choosing the size of a future element of a dog’s wardrobe, it is better to take a larger item, since any dog ​​loves freedom, because it will need to run outside, play with its owner or four-legged friends. And remember that you cannot force your pet to get into new clothes; it may take time for the dog to get used to the new thing.

Today there is a large amount of clothing for small breed dogs on sale, and this applies not only to decorative items, but also to functional ones, which are an integral requirement for keeping such pets.

But you can replenish your dog’s wardrobe on your own by sewing the necessary things with your own hands. This will require a minimum of knowledge, material and time.

Miniature Chihuahuas cannot do without walking overalls in cold weather:

English bulldog in an insulated vest a la down jacket:

Bichon Frize in a stylish denim jacket:

Sports suit for griffons for a walk on a cool evening:

Knitting: Jack Russell Terrier in a cozy vest:

Not only small breed pets should have their own wardrobe. In cold winters, warm overalls will not hurt medium and large dogs, especially smooth-haired ones: boxer, basset hound, great dane and others.

For beginner seamstresses or those who don’t want to spend a lot of time calculating pattern parameters and sewing complex items for a dog, we present a simple way to sew a vest for small pets.

To create a life-size pattern, you need to take the following measurements from the dog:

1. The length of the back is from the tail to the neck.
2. Chest circumference - behind the elbow joint.

Divide the resulting length of the back by 10 - you get the size of the side of the squares that will be used to build the following diagram:

On a suitable sheet of paper, draw a grid with the square size obtained as a result of previous calculations. Draw the back, then move the remaining points across the squares - A, B, C and D. The distance from the top of the back to points B and C should be equal to the half-circumference of the chest.

Please note: the belly is a one-piece piece, and the back will consist of 2 parts.
Having connected the resulting points, as in the figure, you can begin to transfer the resulting pattern onto fabric (fleece works well). It is circled with chalk or soap, observing the following nuances:

• if the sewing machine has a “zigzag sewing” function, then the parts will need to be sewn end to end;
• otherwise, it is recommended to leave seam allowances.

Now you need to sew on a zipper; a plastic one is best for this.

Advice: if the vest is made of fleece, it is better to baste the zipper first, and then only stitch it, since such materials can stretch.

If you plan to make a product with a lining, you will need to use the same pattern to cut out identical parts from the selected material and connect them with similar parts. At the end of the armhole and gate must be further processed.

From the following pictures you can choose suitable patterns for Yorkies, Chihuahuas and other small breeds of dogs:

One Piece Pattern:

All provided patterns can be downloaded for free and printed on whatman paper to fit the size of your pet. If there are no difficulties with the simplest sketches, you can look for more complex options in the Burda magazine.

Step-by-step guide to creating a pattern for a Chihuahua and Yorkie

A small breed dog especially needs clothing both in winter and on cool summer evenings. If there are usually no problems with summer T-shirts and shorts, then sewing winter suits the first time can be quite difficult.

Therefore, we will figure out how to create a pattern for a future overalls for a Yorkie or Chihuahua. For example, let's take one of the patterns shown earlier:

The step-by-step process of creating it will look like this:

1. Measure the length of the back, which is determined from the neck to the tail. This distance will be the segment AB, draw it on paper first.
2. To find point F, you need to draw a line perpendicular to the first segment equal to the half-circumference of the animal’s chest.
3. G is the end of the segment from point A, equal to the length of half the collar size.
4. E is the half-circumference of the dog’s waist, measured from segment AB.
5. DC is the length from the bottom of the tail to the beginning of the hip (for small breeds it is usually 4-5 cm.
6. The width of the parts for the front and hind legs is measured according to the half-girth of the limbs in the upper and lower parts. The length is determined as desired.
7. To create a breast pattern, the dimensions are taken based on the main part - the length of the segments FE and DC.
8. LengthFF is the distance between the front legs on the chest side, DD is behind the hind legs, CC is under the tail (usually this segment is 2-3 cm).

The pattern is ready, you can transfer it to the fabric and cut it, taking into account 1 centimeter allowances on all sides.

If the owners have a lapdog or, for example, a cocker spaniel, you can also use this pattern, carefully taking measurements of the pet in a standing position.

Pattern of blankets and harnesses for dogs

The pattern of the simplest blanket can be constructed according to the following scheme:

AB – length from neck to tail, collar BAB – neck circumference.

To sew a blanket, connect the back and collar along the BAB line. Please note that identical points on different parts must match.

Sew the collar into a ring, and sew a belt to it. The T-shaped part should cover the pet's back. For convenience, some sew a loop for the tail at point B.

Using a similar principle, you can create a harness pattern for miniature breeds, the diagram of which is shown in the following figure:

After sewing it, you can attach suitable fasteners, such as Velcro, to the ends.

Clothes for your pets should be chosen from fabrics that are easy to wash and easy to care for. Single-layer sweaters and overalls are suitable for autumn, and suits with an insulated layer for winter.

For decorative clothing, you can use any fabric, the main thing is that the item is tailored to size and does not rub anywhere.

When choosing the size of a future element of a dog’s wardrobe, it is better to take a larger item, since any dog ​​loves freedom, because it will need to run outside, play with its owner or four-legged friends.

And remember that you cannot force your pet to get into new clothes; it may take time for the dog to get used to the new thing.

P.S. The article and the pictures are very poor in grammar, so I won’t risk giving the original source.