Making a cool hookah from a glass bottle. How to make a hookah with your own hands: secrets of making

The history of tobacco smoking in the world does not go back very long since the beginning of the Europeans’ exploration of the American continents, where the Indians have been using the plant for more than two thousand years. Having quickly spread thanks to trade routes, tobacco found supporters among various pseudo-scientific healers who were enamored with fashion, fortunately not for long. In eastern countries, smoking tobacco was approached more thoroughly and leisurely than the fussy Europeans, making the process a kind of ritual for relaxation, peace and a pleasant pastime. It was in India that the first hookahs appeared, making it possible to impart softness, pleasant coolness and a wide variety of aromas to tobacco smoke. In our article we will tell you how to make a real hookah yourself quickly and easily at home, correctly and without much expense!

How to make a hookah at home: making your choice

Modern hookahs are made from high-quality materials to avoid unwanted flavor impurities. Such smoking devices are easy to clean, convenient to disassemble and last much longer than their copper and brass counterparts. Design solutions in the production of such devices allow you to purchase a high-quality and original model. Traditional hookahs remain popular due to their relative affordability and oriental flavor. A properly made hookah at home is not inferior, and sometimes superior, to purchased copies and, of course, will cost much less.

The design of hookahs is simple; the main rule in its manufacture is tightness. At the end of the article, you can watch a detailed video on making various structures at home.

The simplest homemade hookah can be made in a matter of seconds from a plastic bottle. You will need a regular half-liter plastic bottle and a tube more than 10 cm long as a mouthpiece. IN The container is filled about a third full with filter liquid, after which the bottle is tilted directly in the hands and a hole is made in the side to insert the tube. The lower end of the mouthpiece must be immersed in the liquid a couple of centimeters to achieve a filtering effect. Tobacco is stuffed into a cigarette, inserted into the mouthpiece and smoked through the neck of the bottle. The advantages of a hookah from a bottle include its availability, speed of assembly and smoking, undemanding quality of tobacco and the absence of coal. The main disadvantages, of course, are almost one-time use and “unpresentableness”. And you won’t be able to really relax with such a hookah - you need to constantly keep it in the same inclined position.

Let's look at serious, “adult” hookahs that you can assemble yourself from scrap materials, piece by piece:

1) The hookah flask is designed for filter liquid. Any container from a glass to a large five-liter bottle is suitable for this purpose. The main requirements for this part of the smoking apparatus are a tight lid, no leaks and stability sufficient to support the entire structure of the apparatus. You need to make a hole in the lid of sufficient size for the hookah shaft. The number of smoking holes and their location are determined depending on the container and the presence of hoses, for example, to make a hookah from a bottle, it is better to make 1-2 holes on the side, above the level of the filter liquid. In glass or small vessels it would be more appropriate to make a stopper with the necessary holes. There are options for making a flask from large fruits of watermelon, melon or pumpkin.

There are no special restrictions for the filter liquid; juices, milk, wine and even plain water are suitable. Beginning hookah smokers should not immediately experiment with strong alcoholic drinks; the effect can be much more noticeable than intended.

2) The hookah shaft performs the functions of pre-filtration and cooling of smoke. For a homemade hookah, metal tubes with a diameter of 1-3 cm are best suited; due to condensation, heavy impurities remain best on the metal. A piece of plastic pipe left over after repair is also quite suitable. In the most extreme case, you can use ordinary foil, wound around an object of the required diameter in several layers necessary for rigidity. The shaft is inserted into the hole of the flask and sealed at the joint with rubber, foil, plasticine or simple chewing gum. Please note that the shaft must be lowered into the filter liquid to a depth of 2-3 cm and secured in this position. This will prevent you from straining your lungs too much when smoking. You can lower the shaft tube to the very bottom, after making a cut or hole at the desired level.

3) The tobacco bowl has special requirements for heat resistance. Depending on skill and imagination, cups are made with your own hands from wood, gas burners, a tea strainer, or even sculpted from clay. For one-time use, a small piece of fruit can be used as a bowl. The holes in the bowl should be small enough so that the tobacco does not fall into the shaft and large enough so that air can freely flow through, otherwise smoking a hookah will become extremely difficult. Cover the top of the bowl with foil with holes on which the smoldering coal will be placed. The optimal distance between the coal and the tobacco layer is approximately 1 cm. The bowl is hermetically secured to the shaft; in the case of fruit, you just need to press it tightly into the shaft so that there are no gaps.

4) Everyone chooses tubes and hoses for a hookah according to the availability of material and their own preference. Dropper pieces or plastic corrugation are suitable. At worst, you can use chewing gum to secure a cocktail tube in the hole; this, of course, will reduce the mobility of the smoker, but will allow you to fully experience the functionality of the hookah you made yourself. Remember to keep the pipes and hoses clean to avoid unpleasant flavors in the smoke.

Video on the topic of the article

Creating a hookah at home or in the countryside yourself can be turned into an exciting activity, it all depends only on your skills and imagination. The video will help you choose the option that's right for you.

Hookah lovers know very well that smoking it in a restaurant or even a cafe is not a cheap pleasure. This is why many people wonder how to make a hookah on their own. There's really nothing complicated about it. The design is incredibly simple and consists of only a few parts. You just need to collect them all correctly.

Hookah lovers know very well that smoking it in a restaurant or even a cafe is not a cheap pleasure.

You can make a hookah at home from the most ordinary plastic bottle. From available materials it is possible to assemble a simple and reliable structure without spending a lot of time and effort.

What is necessary:

5 liter bottle;
1 liter bottle;
a pair of lids of different diameters;
plastic tubes 2 m and 30 cm long;
foil;
apple;
tobacco;
toothpicks;
coal.

What do we have to do:

Make slits in plastic bottles with dimensions corresponding to the diameter of the tube.
With the outer side, attach these structural elements to each other.
Insert shaft.
Screw the cap onto the bottle so that the tube is immersed in water literally a centimeter.
Make a bowl from an apple using toothpicks and a knife.
Place the apple on the cap placed on the bottle.
Cover the makeshift bowl with foil and make holes in it.
Place charcoal on foil.

Tip: You don’t have to use foil during the manufacturing process. To do this, you just need to purchase a special cloud. The smoking process will be much faster and easier.

Gallery: DIY hookah (25 photos)

How to make a hookah at home (video)

How to make a good hookah from a glass bottle yourself

To make a hookah, it is not at all necessary to use plexiglass. Even a simple bottle can serve as the basis for this amazing design.

What is necessary:

bottle;
copper tube;
plastic tube;
hose;
rubber stopper;
bowl;
blade;
drill;
a drill designed for working with glass.

To make a hookah it is not necessary to use plexiglass

Progress:

Drill a hole in the plug the same diameter as the tube.
Connect the copper tube to the plug.
Make a small hole in the side of the bottle.
Place the plastic tube onto the hookah hose.
Attach the hose to the bottle.

DIY hookah flask

The technique of making a flask for a future hookah, although not complicated, nevertheless requires a certain skill. A person who has dealt with glass work at least once will be able to easily do this work.

Step-by-step instruction:

Take a small glass jar and make a hole in the lid for the bowl.
Make small holes on the sides of the jar for the tube and valve.
Sand the holes made using a drill.
Cut a couple of glass tubes to create a valve and insert them one into the other.
Cut a couple of longer tubes to make the shaft and mouthpiece.
Make small holes in the tube that will be lowered into the water to create a diffuser.
Additionally, make notches on this tube.
To make a valve, take a couple of tubes, gaskets and a glass ball.
The hose in this case is a tube made of medical silicone.

The technique of making a flask for a future hookah, although not complicated, nevertheless requires a certain skill

Advice: in order to avoid mistakes in the manufacture of the structure, it is recommended to initially make a drawing and carry out all actions in accordance with it.

How to smoke a hookah at home

In order to smoke an electronic or regular hookah, you need to very accurately calculate everything, from the volume of water and the degree of humidity of the tobacco itself to the amount of coal required for lighting.

The whole process boils down to the following steps:

The hookah needs to be thoroughly rinsed and then poured water into the flask.
Attach the shaft to the flask. The tube should be immersed in the liquid a maximum of four centimeters.
Place the coal on the stove and let it sit until about a third of the flame turns orange.
Pour tobacco into the bowl and loosen it.
Cover the bowl filled with tobacco with foil with small holes made with a regular toothpick.
To keep the heat longer, additionally make a small side out of foil.
Now place the coal in the bowl and cover with a cap or plain foil for a few minutes.
After this time, move the coals to the edges.
You can start smoking.

In order to smoke an electronic or regular hookah, you need to calculate everything very accurately

If the hookah stretches well and does not taste bitter, then everything was done correctly.

How to make homemade hookah tobacco with your own hands

It is not at all necessary to purchase tobacco ready-made. It is much cheaper to prepare it yourself.

To do this you need to prepare the following components:

50 g tobacco;
a couple of glycerin bubbles;
essential oil;
syrup.

It is not necessary to purchase tobacco ready-made

Preparation progress:

Place two thirds of all the required tobacco in a container and pour boiling water over it.
Strain the water using a fine colander.
Dry the steamed tobacco by placing it on a baking sheet and placing it in an oven preheated to seventy degrees for ten minutes.
Mix raw tobacco with dried tobacco.
Add glycerin and about ten drops of essential oil.
Mix this mixture thoroughly and pour molasses into it.
When the consistency of the mixture resembles thick jam, it must be poured into a suitable container and sealed tightly.

Infuse the tobacco mixture for a week.

How to properly hammer a hookah so that there is no bitterness

Often, smoking a hookah does not bring pleasure due to the appearance of unpleasant bitterness. It can arise for a number of reasons. Chief among them is poor equipment. Before use, you need to pay attention to the size of the bowl, the quality of the hose and many other details that can affect the final result.

In addition, you should properly care for the device, regularly rinse it under running water, and clean the shaft with a brush. With its help, you can easily remove soot and sediment, which gradually accumulate and give a characteristic bitterness.

When purchasing, you should check whether Narghile is detergent-resistant. Some cannot withstand even weak chemical compounds.

Bitterness can also be caused by excessive heat directed at the tobacco. To correct the situation in this case, you just need to remove excess coals from the bowl, blow on the tobacco mixture and let it cool a little time.

The cause of the bitter aftertaste may be:

lack of skills in smoking narghile;
downtime of the device while smokers are relaxing;
touching tobacco to foil;
excessive heat;
poorly washed device.

In most cases, you can get rid of the unpleasant bitterness after smoking a hookah, but it is much easier and better to initially do everything exactly in accordance with the technology. An unpleasant taste will not appear at all.

How to easily make a hookah from a bottle (video)

Absolutely anyone can make a hookah at home. For this, any available materials are used. Even an unnecessary eggplant can become the basis of this design. You just need to put in a little effort to assemble this structure yourself.

Many people wonder what is better, to make hookah from a bottle do it yourself or buy it, because a wide range of smoking devices is available in stores. The fact is that a finished device will cost several times more, but it is not always able to satisfy the buyer’s request. In this case, you can make your own hookah from available materials, for example from an ordinary bottle.

DIY hookah from a glass bottle

In order to make a hookah from a bottle you will need:

drill (diamond is recommended);
glass bottle (optional plexiglass);
pipe (preferably made of stainless material);
plastic or silicone flexible tube;
bowl base;
rubber plugs (seals);
foil.

In the selected container, two holes are carefully drilled opposite each other: one for the smoking pipe, equal in diameter, the second (optional) for back blowing, which is not necessary for a homemade hookah, but the device will be more convenient to use.

The holes should be carefully drilled at low speed, do not put pressure on the surface of the bottle and make sure that the container does not crack, otherwise it will be unsuitable for a hookah. If the holes turn out to be smaller in diameter than required, then their size can be increased by boring them with a file. The smoking hole is sealed with a rubber stopper, through which a flexible tube is inserted, the optimal length of which is 0.5-1 m. The blowing hole is plugged with an ordinary stopper. This is how it is made hookah flask.

The required amount of water is poured into the resulting flask, after which a stainless steel pipe is inserted into the neck. Its end enters the water no more than 2 cm and in no case rests against the bottom. The space between the shaft and the throat must be sealed; a rubber stopper, an extra layer of foil, electrical tape or tape wrapped around the shaft are also suitable for this.

A through hole is made in the dish selected for the bowl, and the finished saucer is placed on the shaft. To prevent it from slipping, you can place it on a rubber seal, glue or solder it to the outer surface of the shaft. Then loosened tobacco is placed in the bowl and the structure is covered with riddled foil on top, on which hot coal is placed.

After completing the assembly, you can decorate the hookah so that the design fits better into the interior.

Homemade hookah from a plastic bottle

Making hookah at home conditions can be done using simple household items.

This version of the hookah is faster to manufacture than its glass counterpart, but is less aesthetically pleasing and short-lived.

In order to make a hookah from a plastic bottle with your own hands, you will need:

bottle;
cocktail tubes (straws);
two plastic caps according to the size of the neck of the selected bottle;
apple (preferably large variety);
foil;
insulating tape.

In the two selected lids, you need to make the required number of holes with any sharp object or tool so that air can freely pass into the container. For an average neck, it is recommended to make two or three holes located exactly above each other, otherwise the tubes will be pinched and air will not get inside.

By placing the lids bottom to top, tubes are inserted into the holes made, after which the bottle is sealed. Based on the length of the straw, add the required amount of water to the bottle so that its level reaches the ends of the straws no more than 2 cm; the ends of the straws should not rest against the bottom.

To make a bowl for coal, you will need one half of a large-grade apple, cut lengthwise with the middle already removed. At the base of the bottom of the bowl you need to make another hole, slightly smaller than the diameter of the lid. In the bowl itself they make a substrate for tobacco, whose role will be played by a piece of foil with holes pierced with a toothpick. The bowl is placed on top of the structure, after which a mixture of tobacco is placed in it and covered with riddled foil, on which charcoal is placed. If there are no coals, you can use hot coins or hot stones.

A hole for smoking is carefully cut into the wall of the bottle above the water level. It must exactly match the diameter of the smoking pipe, otherwise the device will not work. A straw is inserted into the resulting hole, after which all cracks are sealed with electrical tape, sealing the entrance. If the hole is too large, you can seal it by wrapping an extra layer of foil around the inserted tube.

In such simple ways you can make a hookah from a bottle with your own hands.

Imagine that you and your friends wanted to smoke a hookah at home, or in nature, but there was none nearby - don’t be upset, because there is always a way out. We will share with you proven ways to make it at minimal cost from scrap items. A self-made smoking device will not be inferior in properties to the purchased prototype. After all, a hookah is not a very complicated design.

For the first method you will need: a plastic bottle with a capacity of 5 liters, a pair of plastic caps of different sizes, foil, a pair of plastic tubes (one 2 meters long, the other 30 cm long), toothpicks, charcoal, an apple and, of course, the tobacco itself.

In the lids of a 5-liter bottle and a liter jar, we cut a hole of the same diameter as the tube. We string the lids connected by the outer edges onto it. Screw the resulting cap onto the bottle so that the tube is immersed approximately 1.5 cm into the liquid. Using a knife, we cut out a kind of bowl from the apple, which we then place on the bottle. Make sure there is traction. Then cover the apple with a thick layer of foil and place the coals. You can start smoking!

Second way. For our homemade hookah you will need a plastic liter bottle and a stick, which is usually wrapped in foil. The apple fruit must be quite large, since we will be putting it on the neck of a 5-liter bottle. As in the previous method, the tube should be immersed in water by 1.5 cm. We make a bowl from the apple, and an opening in the bottom of the bottle. At the top of a 5-liter bottle, cut a hole of the required size and insert a liter container there. Place a pipe in the apple bottom. We put the resulting design on the neck. We put coals on top. The designer hookah in the Hand made style is ready!

Smoking tobacco has been known to the world for thousands of years. Fortunately, the fashion for this bad habit has passed, and people today increasingly prefer a healthy lifestyle. Europeans and Americans always smoked on the go, but in India they made a whole ceremony out of it. They use hookahs for smoking. Today we will tell you how to make a hookah with your own hands.

Following Indian traditions

India is considered the birthplace of hookah. It was in this country that people smoked aromatic, sweet and pleasant tobacco. This ceremony takes place slowly. Indians know how to relax.

The spread of overseas traditions did not take long to occur, and hookah became popular in our country. You can purchase such a design in a specialized store, however, the prices for hookahs are steep. So the inventors began to compete in their ingenuity. And yet they figured out how to make a hookah with their own hands.

For a homemade hookah to function, you need to know what parts it consists of. So, the basis of the hookah is the flask, which contains the filter liquid. You can take any available means, for example, a plastic bottle, glass, jar, container for bulk substances. Some inventors make a flask from melon, watermelon, pumpkin, apple, pineapple. A creative approach, you agree.

A hookah will not work without a shaft. The metal tube acts as a cooling element so that a person can inhale cool smoke. To make the shaft, you can use any metal or plastic tube. Tip: choose stainless metal or aluminum. Other metals can oxidize and give tobacco smoke an unpleasant taste. The shaft is immersed in the flask literally 20-30 mm below the liquid level. Otherwise, the load on the lungs when smoking a hookah will be enormous.

The hookah bowl must be heat-resistant and airtight. For one-time smoking, you can use an apple. Do you want to build an unusual hookah? Make a bowl out of clay or a funnel.

Tubes can be used flexible, plastic, shower, glass - whatever comes to hand. Remember the main thing: the design of the hookah must be airtight and safe, so it is better to lubricate the joints with silicone or wear rubber gaskets.

A creative approach to the invention of hookah

Many people are interested in how to make a hookah from a bottle. Fans of this business have long ago purchased a real hookah during their trip to India. But beginners or experimenters can do it themselves. We will tell you how to make a hookah from a glass or glass. The principle of making a smoking device from a bottle is similar.

If you try hard, you can make a reliable design structure that will serve you for decades. Just remember that smoking is harmful to your health. And even safe flavored tobacco can cause the development of various ailments of the respiratory system, and not only that.

Required tools and materials:

glass beaker;
apple;
toothpicks;
cocktail straws;
knife or scissors;
food foil.

Step-by-step description of the process:

First, we will try an apple on a glass. The fruit should fit tightly into the opening of the dish.

Cut the apple in half.
Using a teaspoon, carefully remove the seeds and membranes. Scrap the pulp a little to make a bowl.

We pierce the apple with toothpicks, placing them at a distance of 1-2 mm from each other. It turns out to be such a fence.

Make a hole on the back of the apple bowl with a knife or screwdriver.
Insert 4-5 cocktail tubes inside. This will be the hookah shaft.
We fix the tubes with an elastic band.
We try on the length of the tubes to the glass.
If necessary, cut off the excess and remember that the shaft should be immersed in the filter liquid by 2-3 cm.

Cut off a piece of food foil. Fold it in two layers and smooth it out thoroughly.
Cover the inside of the apple bowl with foil.

We make holes on the foil inside the bowl. You can use a needle or toothpick.

Fill the glass with water or other filter liquid.

We put the made bowl with the shaft in place.
Make a hole in the side of the apple bowl and insert a cocktail straw.

Cover the bowl tightly with foil.
Place the smoking mixture inside the bowl on foil with holes.
Seal the top of the bowl with foil folded in two or three layers. For reliability, the foil can be secured with rubber bands.

We roll up a strip of foil and wrap it around the top of the bowl to create sides.
Again, use a needle to make holes in the foil and place hot coals on top.

Ministry of Health warns!

Everyone knows that smoking is harmful to human health. However, many of us cannot give up this bad habit. Masters of homemade smoking devices are often interested in how to make hookah tobacco at home.

To prepare a hookah smoking mixture you will need the following ingredients:

tobacco;
flavoring agents;
sweets;
glycerol.

You can buy absolutely any tobacco to suit your taste. Regular tobacco is not smoked through a hookah - this is bad manners. Need to add a little scent. For this purpose, various flavoring mixtures, fruits, and essential oil extracts are used. Pharmacy glycerin will act as a smoke thickener. It is important not to overdo it with adding this ingredient. To make the smoke sweeter, you can add a little honey, fruit syrup or molasses.