1 cubic syringe. How many milliliters are in an insulin syringe? Poll about cortexin. other children

One cube in a syringe means one ml. medicinal solution. One ml. water, weighs one gram. This means that in one cube or milliliter of water there will be 1000 mg of the weight of this water. The number of mg of the drug in the ampoule is determined by the percentage. For example, we have one ampoule of 1% diphenhydramine with a volume of one ml. In dry form, the amount of diphenhydramine is in 1 ml, its 1% solution will be 0.01 g. That is, 10 mg.

A cube is the colloquial name for a cubic centimeter, and if we talk about a syringe cube, it means 1 milliliter (a milliliter is equal to a cubic centimeter).

Thus, 1 cube of a syringe will always equal 1 ml of liquid or drug solution.

There are syringes of different capacities - 1 ml, 2 ml, 5 ml, 10 ml, etc.

Based on the above:

A 1ml syringe is the same as a 1cc syringe.

A 5ml syringe is the same as a 5cc syringe.

A 10ml syringe is the same as a 10cc syringe.

As for the number of mg (milligrams) in a syringe cube, this value will depend on what kind of liquid or medicine is in it.

For example, if you take water, then 1 ml of water = 1 gram of water = 1000 mg of water. That is, 1 cube of a syringe is 1000 mg of water.

In the case of medications, the amount of mg in 1 ml and in 1 cube of a syringe will depend on how much active substance is in 1 ml of solution.

This information is usually indicated on the annotations for the medicine.

The drug Gentamicin. On the packaging you can see the following information:

"Solution for intravenous and intramuscular administration 40 mg/ml."

"Solution for intravenous and intramuscular administration 80 mg / 2 ml."

This means that in 1 milliliter there will be 40 mg of the active substance (gentamicin sulfate).

If the single dosage is 100 mg, then for injection you need to draw 100 / 40 = 2.5 milliliters or 2.5 syringe cubes.

1 cube is the colloquial name for one cubic centimeter, i.e. this is a unit of volume, and therefore for liquids or bulk substances this unit will always be the same, no matter what it is: water, sour cream or sand, there will always be the same volume in the same container. A milliliter is also a unit of volume and is equal to exactly one cubic centimeter. In other words, 1 cube = 1 cubic centimeter = 1 ml. But the weight will depend on the density of the substances; the higher it is, the greater the weight will be in one unit of volume. For example, 1 ml of water is equal to 1 gram, but sunflower oil has a higher density than water and therefore the weight of 1 ml of oil will be more than 1 gram, therefore 1 cube is equal to 1 ml, but the number of milligrams will depend on the density of the substance that is being measured .

Cube is a kind of slang that is used in medicine. In fact, there is no such official measure of volume or mass. A cube is one milliliter of a certain solution. That is, when they say that you need to inject a cube of drugs, they talk about one milliliter.

Accordingly, when purchasing the syringes themselves, they ask how many cubes this manipulation tool is needed for.

As for the mass, nothing can be said for sure; this parameter will change. Still, solutions have different densities, which means that with the same volume they will have different masses. And we rarely see exactly the mass of the injected drug. Even if we are talking about powder, we still use a solvent.

A cube is a colloquial term for one milliliter. That is, 1 cube is 1 milliliter of medicine in liquid form in a syringe.

It is more difficult to convert the number of milligrams into a cube - it depends on the medicine. Usually the annotation indicates how many active substances and auxiliary components in grams are contained in one milliliter of the medicine.

While in the department (regardless of which one - therapeutic, surgical, cardiology, intensive care), one way or another you have to deal with injections.

Procedure nurses and other nurses most often use this word - cube (2 cubes, 5, 10 cubes, etc.).

A medical “cube” is a milliliter:

1 cube is 1 ml;

2 cubes is 2 ml;

5 cubes is 5 ml.

For example, to make a cube of analgin - inject 1 ml of analgin.

As for mg, it (the amount of substance) is determined by the percentage of the substance in the ampoule/vial.

How many grams is 1 cube in a syringe?

The volume of the syringe and the medicine in nm is measured not in grams, but in milliliters, so it is impossible to give an exact answer, since all medicines have different mass and density. One cube contains one milliliter, and the number of grams of medicine can be found in the annotation.

One cube is the colloquial term for one milliliter or one large division on a syringe. One milliliter of water weighs approximately one gram. That is, one syringe cube contains one gram of water. Medical preparations based on an aqueous solution will weigh approximately this much, since the content of denser active substances in them is several times less and has practically no effect on the weight of the cube. Even if an alcohol solution is indicated on the package, you should remember that this is a very low percentage alcohol solution and there is still more water in it. So count one cube as one gram and you won't be much mistaken.

You can find out how many grams of active substance are contained in one cube (in 1 milliliter) on the medicine packaging. In front of me now is a package of diclofenac, 1 cube contains 25 mg of active ingredient. Each drug has a different dosage.

1 cube in a syringe is 1 milliliter, and how many grams of the active substance is written on the injection box.

One cubic centimeter is called a cube of medicine, but the cube holds different numbers of grams. Medicines administered through injection have different ratios of grams to milliliters. To do this, you need to look at the instructions or packaging; the recommended number of milligrams is indicated there, and the definition of a cube is used by experienced doctors and nurses.

A cube is a measure of volume equal to one cubic centimeter. A gram is a measure of mass. There are approximately 250 milligrams in one milliliter. And in order to calculate accurately, you need to read the information about the density on the packaging and perform simple arithmetic operations.

Everything will depend on the density of the liquid itself. Still, the chemical composition of each medicine is different, the concentration of the various components is not equal, so it is impossible to say exactly how many grams are in one cube.

Those. in order to find out the amount of the substance in grams, you must refer to the instructions for the medicine/injection liquid. Plus, usually manufacturers indicate the active active ingredient separately in grams (i.e., the main one), and separately the auxiliary components, also in grams.

See the photo above as an example. The data is not written down here, as in injections, but the active substance and auxiliary substances are clearly visible in the photo.

If we talk about water, then in one cube there will be 1 ml - volume and 1 mg - weight. But for other liquids, the mass in mg may vary, since it also depends on the density of the substance. But this information must be on the medicine packaging.

When they say one cube, they mean one cubic milliliter. If we take one cube of water as an example, its weight will be 1 gram. For medicines, the weight of the cube will depend on their composition. Usually the packaging indicates how much all the components included in a cubic millimeter of medicinal solution weigh.

1 cube in a syringe how many ml

how much is in 1 syringe cube ml

In the Other education section, the question is 1 cube cm of syringe - how many ml? asked by the author Sanya Sanya the best answer is cm"3 and ml are different names for the same volume. milli 1\\1000 liter = 1000 cm"3 so think about it. There are different types of teaspoons.

1=1 there! You don't equal now! There is still sweating and many other things! Generally in kb. ml 1 ml goes!

koli4estvo 4ainih lozek umnozit na 5)

1 cm3 = 1 ml = 30 drops (how do you pour 5 ml into a teaspoon? - Look at the syringe at 5 ml (cm3) what is its volume)

How many milliliters are in an insulin syringe?

The most accessible method of administering insulin to hormone-dependent diabetics is the use of special syringes. They are sold complete with short sharp needles. It is important to understand what a 1 ml insulin syringe means and how to calculate the dosage. Diabetic patients are forced to inject themselves. They must be able to determine how much hormone to administer based on the situation.

Composition of drugs

To calculate insulin in a syringe, you need to know what solution is used. Previously, manufacturers made medications containing 40 units of the hormone. On their packaging you can find the U-40 marking. Now we have learned to make more concentrated insulin-containing liquids, which contain 100 units of the hormone per 1 ml. Such containers with solution are marked U-100.

In each U-100, the dose of the hormone will be 2.5 times higher than in U-40.

To understand how many ml are in an insulin syringe, you need to evaluate the marks on it. For injections, different devices are used, they also have U-40 or U-100 signs. The following formulas are used in the calculations.

U-40: 1 ml contains 40 units of insulin, which means 0.025 ml - 1 U.
U-100: 1 ml - 100 IU, it turns out, 0.1 ml - 10 IU, 0.2 ml - 20 IU.

It is convenient to distinguish instruments by the color of the cap on the needles: for a smaller volume it is red (U-40), for a larger volume it is orange.

The dosage of the hormone is selected by the doctor individually, taking into account the patient’s condition. But it is extremely important to use the necessary injection agent. If you draw a solution containing 40 units per milliliter into a U-100 syringe, using its scale as a guide, it will turn out that the diabetic will inject 2.5 times less insulin into the body than planned.

Markup features

You need to figure out how much of the drug is required. Injection devices with a capacity of 0.3 ml are available for sale, the most common being 1 ml. This precise size range is designed to ensure that people can inject a strictly defined amount of insulin.

The volume of the injector should be based on how many ml are indicated by one marking division. First, the total capacity should be divided by the number of large pointers. This will give you the volume of each of them. After this, you can count how many small divisions are in one large one, and calculate using a similar algorithm.

It is not the applied stripes that need to be taken into account, but the spaces between them!

Some models indicate the value of each division. A U-100 syringe can have 100 marks, broken up by a dozen large ones. They are convenient for calculating the required dosage. To administer 10 units, it is enough to draw the solution up to the number 10 on the syringe, which will correspond to 0.1 ml.

The amount should be calculated separately if the so-called “insulin” is used. This is a syringe that holds not 1 cube of solution, but 2 ml.

Calculation for other markings

Usually, diabetics do not have time to go to pharmacies and carefully select the necessary equipment for injections. Missing the deadline for administering the hormone can cause a sharp deterioration in well-being; in particularly difficult cases, there is a risk of falling into a coma. If a diabetic has a syringe on hand intended for administering a solution with a different concentration, he has to quickly recalculate.

If a patient requires a one-time injection of 20 units of a drug labeled U-40, and only U-100 syringes are available, then you should draw not 0.5 ml of solution, but 0.2 ml. If there is a graduation on the surface, then it is much easier to navigate by it! You need to choose the same 20 units.

How else are insulin syringes used?

ASD fraction 2 - this remedy is well known to most diabetics. It is a biogenic stimulant that actively affects all metabolic processes occurring in the body. The drug is available in drops and is prescribed to non-insulin-dependent diabetics with type 2 disease.

ASD fraction 2 helps reduce the concentration of sugar in the body and restore the functioning of the pancreas.

The dosage is set in drops, but why then a syringe if we are not talking about injections? The fact is that the liquid should not come into contact with air, otherwise oxidation will occur. To prevent this from happening, and also for accuracy of administration, syringes are used for the set.

Let's calculate how many drops of ASD fraction 2 are in the “insulin”: 1 division corresponds to 3 particles of liquid. This amount is usually prescribed when starting the drug and then gradually increased.

Features of various models

There are insulin syringes on sale that are equipped with removable needles and are of one-piece construction.

If the tip is soldered to the body, the medicine will be completely removed. With fixed needles, there is no so-called “dead zone” where part of the drug is lost. It is more difficult to achieve complete removal of the medication if the needle is removed. The difference between the amount of hormone collected and injected can reach up to 7 units. Therefore, doctors advise diabetics to purchase syringes with non-removable needles.

Many people use the injection device several times. This is prohibited. But if there is no choice, then the needles must be disinfected. This measure is extremely undesirable and is only permissible if the syringe is used by the same patient and it is impossible to use another one.

The needles on the “insulin”, regardless of the number of cubes in them, are shortened. The size is 8 or 12.7 mm. The release of smaller versions is impractical, since some insulin bottles are equipped with thick stoppers: the medicine may simply not be removed.

The thickness of the needles is determined by special markings: a number is indicated next to the letter G. You should focus on it when choosing. The thinner the needle, the less painful the injection will be. Given that insulin is administered several times daily, this is important.

What to pay attention to when performing injections

Each vial of insulin can be used multiple times. The remaining amount in the ampoule should be stored strictly in the refrigerator. Before administration, the drug is warmed to room temperature. To do this, remove the container from the cold and let it stand for about half an hour.

If you have to use a syringe multiple times, it must be sterilized after each injection to prevent infection.

If the needle is removable, then different models should be used to collect the medicine and administer it. Large ones are more convenient for taking insulin, while small and thin ones are better for injections.

If you need to measure 400 units of the hormone, you can take it into 10 syringes marked U-40 or 4 syringes labeled U-100.

When choosing a suitable injection device, you should focus on:

The presence of an indelible scale on the case;
Small step between divisions;
Needle sharpness;
Hypoallergenic materials.

You should take a little more insulin (1-2 units), since some amount may remain in the syringe itself. The hormone is taken subcutaneously: for this purpose, the needle is inserted at an angle of 75 0 or 45 0. This level of tilt allows you to avoid hitting the muscle.

When diagnosing insulin-dependent diabetes, the endocrinologist must explain to the patient how and when the hormone should be administered. If children become patients, the entire procedure is explained to their parents. For a child, it is especially important to correctly calculate the dose of the hormone and understand the rules for its administration, since a small amount of the drug is required, and an excess of it should not be allowed.

How many ml in a syringe cube

Sumamed was prescribed, but I can’t figure out how much to give it, there is a suspension of 100 mg/5 ml dosage for children: at the rate of 10 mg/kg body weight once a day, the child weighs 22 kg (5.5 years old), how many milliliters should I give the child? The set includes a measuring syringe up to 5 milliliters. I can't think straight :(. The topic has been moved to another conference, it is recommended to discuss it there! When writing a new topic, please stick to the topic of the conference.

Dilution of medicine for injection. Medicine and health

It’s easier to buy a 2.0 ml syringe; by shading you will definitely get 2.0 ml

Dilution of medicine for injection. Pediatric medicine

The child was prescribed injections of Cortexin 10 mg, it is in the form of a powder in a bottle, just as much as we need, and the medicine needs to be diluted with novocaine so that it does not hurt. novocaine - it is written on the package injection solution 5 mg/ml/10 ampoules of 5 ml/, The doctor prescribed novocaine 0.5% -2.0, i.e. for dilution, do I need to take a little less than half an ampoule of novocaine? Or am I wrong?

Can you take a break from the big stuff and help me with a small everyday problem? :-)) For example, I need to give my little boy 20 drops of syrup 20 minutes before meals. And he consumes all his food in the garden. So how can I technically give him these 20 drops right in front of the garden gate? Should I just drop it onto a spoon or are there other methods that are still unknown to me? 🙂

Urgently. Pediatric medicine

what is “draw 8 units into an insulin syringe” (we are treating an animal)

what is written on the stripes?

How to drink bacteriophage? Child from 1 to 3

Girls, please give me some advice!! We were diagnosed with Staphylococcus aureus. You need to drink bacteriophage. But the problem is that the last time we drank it was in infancy from a syringe, and now we are 3 years old and under no circumstances does our daughter want to drink it (it tastes bad and smells disgusting). I stuffed half a spoon into it, and it vomited :-(. No matter what I diluted it, the smell remained. Tell me how to take the medicine. It’s very necessary.

Who gave the injections to the child, a question for you. Child from 1 to 3

Please advise. My daughter is 1 year and 3 months old. They prescribed intramuscular injections, 1.2 cc of medicine (I use a 2 ml syringe). Do I need to attach another needle for intramuscular injections or can I inject with the one that comes with the 2 ml syringe? It is 7 mm long less than the “intramuscular” one from a 5 ml syringe, but my mother says that IM needles should be used even for infants to avoid bumps (a pediatrician told her so at one time). The needle from a 2 ml syringe is thinner and about 3.5 mm long. It's easier for me.

Tell me about peptides, please. SP: get-togethers

Please tell me who is in the know))) How to mix them. There is a set for expression wrinkles and a moisturizer. I sit with them like a monkey with glasses. Do you pour all the contents of the ing into the base or do you need to measure something with syringes? I couldn't find a leaflet with instructions. Heelp!! PS. The peptides were collected here, if anything)))

Consider, as an example, a recipe for a serum against expression lines:

Matrixyl Synthe’6 2%

Since we are only adding 6% of the actives, we don't need a thickener or preservative.

We take a standard package of 50g or 20g and calculate the % input for each component

To find out the weight of assets for input, we must multiply 50g/20g by the required % of the asset

If you have a 20g package, then 0.2x4=0.8g

For Matrisil: 0.5x2=1g (for 50g), 0.2x2=0.4g (for 20g)

You can measure all the components with a regular syringe from the pharmacy (they are sterile), after removing the needle. It is better to take a separate syringe for each component.

This cream can be stored in the refrigerator for 6 months. Without the risk of losing its properties, rancidity or violation of microbiological standards.

cedex. Child from 1 to 3

They prescribed Cedex for otitis media, 2 ml. Everything there is in mg. It’s a suspension. Question: 1 mg = 1 ml or not?

Please help me, how much to “hang in grams” is the medicine..

Probably like this: 10mg*22=220mg, i.e. 11ml.

It turns out, 2 measuring syringes and another 1 ml.

How to give medicine to a child: 5 rules. Health of a child up to one year

Children's medications are also often produced in the form of rectal suppositories, and in order to administer them, you will need some skill, but this procedure is not at all difficult for moms and dads. What, how much and how often Before giving your child medicine, carefully read the instructions for its use. Read what the drug should look like, its consistency, and be sure to check the expiration date of the drug. Pay attention to the storage conditions of the drug: some medications must be stored at a certain temperature, without access to light, or even in the refrigerator. Ask your doctor in detail in advance about the dosage and how much.

You cannot independently reduce or increase the dosage of the drug or complete the course of treatment earlier than recommended by the doctor. We measure correctly Never give medicine by eye. If a special measuring spoon or dispenser is attached to the drug (usually it comes in the form of a graduated syringe), it is better to measure the medicine with them rather than with ordinary cutlery (a teaspoon or dessert spoon). This is more convenient (it’s easier to take the medicine from a bottle with a dispenser), and there is no risk of making a mistake with the dosage. Use the measuring device that comes with this medicine: you should not take a dispenser from another medicine, even if outwardly it seems to you that it does not mean anything.

Questions about EPI for Ukrainian women and not only. Other children

There are a lot of questions, little time, so I’m throwing everything into one topic. Manyunya and I are now in the hospital. We ended up with a series of severe attacks, were supposed to be discharged on Thursday, and then it hit us: (In general, it’s just terrible. We drink 3 cubes of Depakine syrup (I measure it with a syringe) and now we’ve added Lamictal, one-eighth, twice a day. Increase the dose And the little one is getting worse: (Yesterday our doctor talked to me. They suspect that we don’t just have epilepsy, but that it’s caused by a genetic disorder, c.

Our non-geneticists have also seen all sorts of genets. signs - whatever we didn’t suspect, and “happy doll syndrome” because of the beautiful face and long eyelashes, and our sky is really gothic :)))

But neither the kareotype nor the amino acid analysis showed anything :))

How to pour perfume? SP: get-togethers

Girls, I remember purchasing molds from us. How did you bottle them? I really need to share the perfume))) and where can I buy empty bottles? Thank you

For me, unscrewing turns out to be final - I have to pour everything out

Survey about CORTEXIN. Other children

I searched and searched, read something, but I still want to make it a separate topic. Girls, who injected their children with CORTEXIN? It is advisable to write point by point :) The questions are: 1. Dosage and frequency. How many days is the course, every other day or every day? 2. What did they breed with? Novocaine or saline solution? 3. How did the children tolerate the injection itself? Is he sick? 4. Diagnosis of the child. 5. Results (positive) after the course, if any, what were they? 6. Side effects, deterioration - if yes, what?

Please help me calculate the dosage of the medicine. Pets

for my dog, 3 kg. You need to add cocarboxylase to the dropper at a dosage of 0.02. It is sold in a dosage of 50 mg. Neither the doctor nor the pharmacists at the pharmacy could really tell me how to get 0.02 as a result. The package contains ampoules with 50 mg cocarboxylase powder and 2 mg ampoules with water for injection. I asked at the pharmacy if I should take 5 ml spirtz. no, you need 2 ml. I read the instructions - it says dilute in a 5 ml syringe. but that's okay, let's buy it. how to measure 0.02? For some reason they told me that.

5 milligrams - how much? Child from 1 to 3

Girls, who knows, 5 milligrams is how much - a teaspoon or less? Otherwise, the doctor prescribed us a medicine, and it says - give a single dose - 5 milligrams.

How much pyrantel for prevention? Pediatric medicine

I bought pyrantel suspension for my child. I didn't understand anything from the instructions. ASCARIDOSIS AND ENTEROBIOSIS. MIXED INVASIONS - once at a dose of 10 mg per kg. Next is the table (I remove the unnecessary, the child is 3 years old) age dose of the drug number of 2 years - 6 years 250 mg 1 measure = 5 ml ANKYLOSTOMIASIS: prescribed at a dose of 10 mg per kg for three days NEKATOROSIS: for severe forms, prescribed at a dose based on 20 mg per kg for three weeks. I don’t understand how to give it to a child for prevention (it seems to me that...

It must be given once. All family members should drink Pirantel at the same time. For adults, the dose is also determined to be 10 mg per kg, or if an adult weighs up to 75 kg, 15 ml of Pirantel is needed, i.e. 3 measurements.

Clean your home. Change your underwear.

To relieve itching, wash your child and apply at least some baby cream. If you suspect that your child has pinworms, then this is not prevention, but treatment. If there are no worms, then the drug does not work on missing worms, i.e. it will not prevent the appearance of worms.

I simply explained the doses to you, this is not advice to take or not take the drug - it should be your decision.

Supplementary feeding: in what cases is it worth additionally feeding the child?

After some time, he may become ravenous and eat much more. The baby's stomach is used to a small volume of milk, so it will take several days before it can accommodate more food. Slow bottle feeding gives your baby the opportunity to stop eating when he's full. Within a week, you will understand how much supplemental feeding your baby needs at different times of the day. Offer supplementary feeding first, then breastfeeding. Some babies breastfeed better on a full stomach. If the baby has not gained weight well, he needs not only to grow, but also to catch up. Accelerated growth requires more food, so it is not surprising that the baby eats so much at first. Rapid growth at this time will be noticeable along a steeper curve.

Devices for supplementary feeding of an infant Supplementary feeding method Pros Cons Comments Spoon An easy and quick way for a small amount of supplementary feeding. Labor-intensive and inconvenient for large amounts of supplementary feeding. A good way to supplement with colostrum. Pipette, disposable syringe or periodontal syringe with a curved end (convenient to use for breastfeeding) An easy and quick way for a small amount of supplementation. Labor-intensive for a large volume of supplementary feeding. Place your baby on your lap so that his head is elevated. Place your feet on a coffee table, etc. During supplementary feeding, let your baby suck his thumb. Make sure that the tip of the syringe or pipette does not touch the baby's palate or cheek. Not much.

Sperm: the struggle for quality. Analyzes and examinations before.

Quantity and quality The first thing that is determined in the laboratory is the liquefaction time of the ejaculate. At first, the sperm is absolutely liquid, then it quickly thickens, and after some time, under the influence of prostate enzymes, it becomes liquid again. The correctness of the transformations can be judged by the change in viscosity. To do this, the ejaculate is drawn into a syringe and released through a special needle. Viscosity is measured by the length of the “thread” that follows the released drop. Sperm is considered liquefied if the “thread” does not exceed 2 cm. Normally, this occurs within 10–40 minutes. If the process is delayed, then? there are problems with the prostate gland. After liquefaction using indicator paper, the semen is tested for acidity. WHO recommend.

How many 30 drops are in milliliters? About yours, about your girl’s

At my request, my husband bought Morozov drops (those that help fall asleep) in the production department of the pharmacy, so these goats (I can’t call them otherwise) are now packaged in ordinary bottles that do not allow dripping through the lid. Just measure out 30 drops the way you want:((If only they had warned him, he would have taken a pipette. There is an idea to mark with a syringe, but I can’t find the volume of the drop.

Young mother, or the first days in the maternity hospital. Adjusting the chest.

They determined the norm at 40 g for each feeding and told her to wake up and feed Anya every 2 hours, counting from the start of feeding. A bottle was urgently purchased and I started pumping. But now, because colostrum began to be replaced by milk and my breasts were full for the 4th day, I began to experience stagnation. I couldn’t squeeze more out of my bust, which was swollen like two pillows, no matter how much I crushed it. Even the maternity hospital electric breast pump, which hummed at full power, but only squeezed out a couple of drops, did not help. By that time, the mechanical one that had been given to me was already at home, and there was no way to pick it up. If I couldn’t get milk, then what was it like for my weakened daughter to do it! One of the weighings, for example, display.

Well done you for fighting. The husband is gold. I wish you all more joy.

I'm a mom in a cube! Multiple pregnancy

Mom in a cube: the real story of an ordinary woman who successfully carried and gave birth to triplets, while maintaining an excellent sense of humor.

And now - one is yelling, the second is sleeping, the third has crap himself. Who should I run to, what should I do? I'm in the hospital. I’m lying alone in the ward with three others. Thanks to the maternity hospital, I at least learned to swaddle there. The seam hurts, my head is spinning, but I have to wash the floors not only in my room, but also in the common kitchen, run with three to the treatment rooms and to the doctors’ offices, which are located on different floors, hand over and receive diapers, keep a diary, when, who and how much he ate and peed, collect urine, carry the babies every day for control weighing and weigh them herself after each feeding. I don't have a second to sleep. At night the worst thing begins. The kids have a tummy ache and they howl in unison. “This will pass by three months. Or maybe we won’t make it to three,” the nurse on duty says distantly and slowly leaves. I'm going crazy. Last

Artificial feeding. Artificial feeding

How to correctly calculate the required volume of the mixture? When artificial feeding, it is important to determine the required amount of nutrition for the child. The daily amount of food depending on the age of the baby is shown in table 1. For example, if the baby is 1 month old and weighs 3500 g, then the daily amount of food is 1/5 of body weight, i.e. 700 ml. To determine how much formula you need per feeding, divide the daily amount of food by the number of feedings. Approximate number of feedings during the day: first week of life - 7-10; 1 week - 2 months - 7-8; 2-4 months - 6-7; 4-9 months - 5-6; 9-12 months - 4-5. It should be noted that if during breastfeeding.

Parent handicrafts. Part 2. Caring for a child up to one year old

How to care for and treat a baby at home.

Moreover, if the drops are placed in a sterile bottle, then we have the opportunity not to break its seal: we wipe the rubber stopper with alcohol, pierce it with a needle and draw it into a syringe. Remove the needle from the bottle and disconnect it from the syringe. As a result, we have a container with a sterile solution. A container that does not spill or break, which is convenient to heat and convenient to use. Nose In order for the medicine to have an effect, it is a good idea to clean the nose first, if, of course, there is an accumulation of mucus in the nasal passages. Children of conscious age

Neither more nor less. How much amniotic fluid is needed?

Oligohydramnios and polyhydramnios during pregnancy. Possible complications, features of childbirth

The increase in volume occurs unevenly. In the first trimester, at 10 weeks of pregnancy, the amount of amniotic fluid averages 30 ml, per week - about 100 ml, at 18 weeks, etc. The maximum volume is observed in the second week of pregnancy, averaging ml. By the end of pregnancy, the amount of water may decrease to 800 ml as a result of increased fluid excretion from the woman’s body. Amniotic fluid performs a number of important functions. They create conditions for the free movement of the fetus, protect its body from adverse external influences, and protect the umbilical cord from compression between the fetal body and the walls of the uterus. Thus, the volume of amniotic fluid is a kind of indicator of the normal course of pregnancy. What.

Not enough milk? It's worth looking into! Part 1. Establishing breastfeeding.

The use of breast substitutes: pacifiers or bottles with a nipple. A simple rule works here: “sucking the nipple - minus feeding (minus breast stimulation for sufficient lactation and minus a certain amount of milk for the baby).” Supplementing the baby with water and/or other liquids. It is obvious that no matter how much the baby drank, he did not eat the same amount of mother’s milk. Water fills a tiny stomach and gives a false feeling of fullness. It is known that plain water (not the kind found in mother's milk) is not absorbed by the child, i.e. has nothing to do with the prevention or treatment of dehydration, but only passes through the baby’s gastrointestinal tract, washing away the flora that breast milk “helps populate.”

Just what the doctor ordered. We give medicine to the baby.

It is unacceptable to use drugs that have expired, were stored incorrectly, have signs of spoilage, or have erased or illegible inscriptions. Rule three: follow the dose, time, method of administration, frequency and duration of use of the medicine prescribed by your doctor. Before the doctor leaves, check whether you understood the dosage regimen correctly: how much, how, when (before, during or after meals), how often and for how long the child should take the medicine. Never give medicine “by eye” - measure the prescribed dose using a special measuring spoon, graduated pipette, measuring tube or syringe without a needle; Before giving medicine to your child, check that you have measured the dose accurately. Use only clean measuring cups. Taking medications should be regulated.

If there is such a need, then divide the tablet very precisely with a sharp knife. For a more accurate dosage, you can use a disposable syringe without a needle. For example, a child needs to be given 1/8 of a tablet: draw exactly 8 ml of boiled water into a syringe, release it into a cup, then crush the whole tablet and dissolve it there, then draw only 1 ml of solution into the syringe from a cup and let the baby drink. The solution prepared from crushed tablets can only be used immediately after its preparation - it cannot be stored and is used once; For the next dose of the drug, the solution is prepared again.

Kogitum - can open ampoules be stored? Other children

Cogitum was prescribed, 1/4 ampoule 2 times a day. Considering the price of the drug, I would like to use the ampoule for at least a day, or even better, for two. Can it be stored open, has anyone checked? Thank you

Mom is giving injections - I need help. We need your experience and knowledge.

Who has experience in this matter? I need your help, otherwise my brain is about to boil :) We prescribed a course of treatment for the child, prescribed a bunch of medications, incl. you need to give injections: 1. Cerebrolysin 1.0 ml intramuscularly 2. Actovegin 2.0 ml intramuscularly 3. Neuromidin 5 mg 0.5 ml intramuscularly The injections will have to be given to the mother, i.e. to myself. I’m terribly afraid, and I’ve never given injections myself in my life. I only have experience in diluting Cortexin injections and, accordingly, I saw where to inject and how to administer. Those. With.

Please convert drops to ml. SP: get-togethers

You need to give the child 10 drops of medicine, but there is no pipette:-(there is a syringe. If you are not too lazy, please measure how many ml to give.

The child refused the breast. Part I. Weaning

Over time, with regular feeding, the nipple takes on a normal appearance. If that doesn't work, feed with feeding pads. You can try to pull out the nipple. True, it was better to start doing this before giving birth. Make a simple mechanism: remove the piston from a 5 ml disposable syringe, use a knife to cut off the part of the syringe where the needle is inserted to make a tube. Insert the piston into the cut end. Place the free end (where the finger rests) on the nipple and pull the plunger so that the nipple is pulled into the syringe. Leave it for a while. With regular exercise, the nipple will stretch. Different breasts Reason. It is easy to suck on one breast, but difficult on the other for some reason.

©, 7ya.ru, Certificate of registration of mass media El No. FS.

Reprinting messages from conferences is prohibited without indicating a link to the site and the authors of the messages themselves. Reproduction of materials from other sections of the site is prohibited without the written consent of ALP-Media and the authors. The opinion of the editors may not coincide with the opinion of the authors. The rights of authors and the publisher are protected. Technical support and IT outsourcing are provided by KT-ALP.

7ya.ru - information project on family issues: pregnancy and childbirth, raising children, education and career, home economics, recreation, beauty and health, family relationships. The site hosts thematic conferences, blogs, ratings of kindergartens and schools, articles are published daily and competitions are held.

If you find errors, problems, or inaccuracies on the page, please let us know. Thank you!

It is important to understand what a 1 ml insulin syringe means and how to calculate the dosage. Diabetic patients are forced to inject themselves. They must be able to determine how much hormone to administer based on the situation.

Composition of drugs

In each U-100, the dose of the hormone will be 2.5 times higher than in U-40.

U-40: 1 ml contains 40 units of insulin, which means 0.025 ml - 1 U.
U-100: 1 ml - 100 IU, it turns out, 0.1 ml - 10 IU, 0.2 ml - 20 IU.

It is convenient to distinguish instruments by the color of the cap on the needles: for a smaller volume it is red (U-40), for a larger volume it is orange.

Markup features

It is not the applied stripes that need to be taken into account, but the spaces between them!

U-40s typically have a scale from 0 to 40, with each division representing 1 unit of insulin. To administer 10 units, you should also dial up the solution to the number 10. But here it will be 0.25 ml instead of 0.1.

The amount should be calculated separately if the so-called “insulin” is used. This is a syringe that holds not 1 cube of solution, but 2 ml.

Calculation for other markings

How else are insulin syringes used?

ASD fraction 2 helps reduce the concentration of sugar in the body and restore the functioning of the pancreas.

Features of various models

There are insulin syringes on sale that are equipped with removable needles and are of one-piece construction.

What to pay attention to when performing injections

If you have to use a syringe multiple times, it must be sterilized after each injection to prevent infection.

If you need to measure 400 units of the hormone, you can take it into 10 syringes marked U-40 or 4 syringes labeled U-100.

When choosing a suitable injection device, you should focus on:

1 cube in a syringe how many ml

how much is in 1 syringe cube ml

1=1 there! You don't equal now! There is still sweating and many other things! Generally in kb. ml 1 ml goes!

koli4estvo 4ainih lozek umnozit na 5)

1 cm3 = 1 ml = 30 drops (how do you pour 5 ml into a teaspoon? - Look at the syringe at 5 ml (cm3) what is its volume)

How many ml are in 1 syringe cube? How many mg are in 1 syringe cube?

1 cube in a syringe is how many ml (milliliters)?

1 cube in a syringe is how many mg (milligrams)?

Syringe cubes, slang name for its capacity in ml. One cube in a syringe means one ml. medicinal solution. One ml. water, weighs one gram. This means that in one cube or milliliter of water there will be 1000 mg of the weight of this water. The number of mg of the drug in the ampoule is determined by the percentage. For example, we have one ampoule of 1% diphenhydramine with a volume of one ml. In dry form, the amount of diphenhydramine is in 1 ml, its 1% solution will be 0.01 g. That is, 10 mg.